Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=25283): Process ended prematurely: osmo-stp_10.42.42.5(pid=25283) [trial-2369↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25283)]
Standard Output
---------------------------------------------- trial-2369 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 04:16:34.843260 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:16:34.854300 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 04:16:35.006155 tst cs_paging_gprs_active.py: using LAC 25927 04:16:35.119020 tst cs_paging_gprs_active.py: using RAC 172 04:16:35.232215 tst cs_paging_gprs_active.py: using CellId 25927 04:16:35.345369 tst cs_paging_gprs_active.py: using BVCI 25928 04:16:35.367590 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:16:35.378448 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:16:35.389086 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:16:35.400192 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:16:35.411493 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:16:35.422725 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:16:35.433960 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:16:35.444892 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:16:35.456292 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 04:16:35.573786 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 04:16:35.848236 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 04:16:35.970824 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:16:36.274015 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25273): Launched 04:16:36.525184 run iperf3-srv_10.42.42.10(pid=25274): Launched 04:16:36.704219 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 04:16:36.826148 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:16:37.129671 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25275): Launched 04:16:37.380648 run iperf3-srv_10.42.42.10(pid=25276): Launched 04:16:37.559190 tst cs_paging_gprs_active.py:38: start network... 04:16:37.680914 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:16:38.138721 run create_hlr_db(pid=25277): Launched 04:16:38.307029 bus /gobi_6: Setting Powered False 04:16:39.328921 run create_hlr_db(pid=25277): Terminated: ok {rc=0} 04:16:39.742332 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25279): Launched 04:16:40.052301 run osmo-hlr_10.42.42.2(pid=25280): Launched 04:16:40.166498 run osmo-stp_10.42.42.5: Starting osmo-stp 04:16:40.704446 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25282): Launched 04:16:41.017093 run osmo-stp_10.42.42.5(pid=25283): Launched 04:16:41.129923 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:16:41.670619 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25285): Launched 04:16:41.781440 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:16:42.053123 run patchelf(pid=25286): Launched 04:16:42.235110 run osmo-stp_10.42.42.5(pid=25283): ERR: Terminated: ERROR {rc=1} [trial-2369↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25283)] 04:16:42.368211 run osmo-stp_10.42.42.5(pid=25283): stdout: | (launched: 2022-12-10_04:16:40.863012) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:16:42.501429 run osmo-stp_10.42.42.5(pid=25283): stderr: | �[0;m�[38;5;43m20221210041641054 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210041641054 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210041641054 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210041641054 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210041641055 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210041641055 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210041641055 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:16:42.629935 run osmo-stp_10.42.42.5(pid=25283): stdout: | (launched: 2022-12-10_04:16:40.863012) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:16:42.756899 run osmo-stp_10.42.42.5(pid=25283): stderr: | �[0;m�[38;5;43m20221210041641054 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210041641054 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210041641054 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210041641054 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210041641055 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210041641055 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210041641055 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:16:42.906197 run patchelf(pid=25286): Terminating (SIGINT) 04:16:43.081086 run patchelf(pid=25286): Terminated: ok {rc=0} 04:16:43.113477 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=25283): Process ended prematurely: osmo-stp_10.42.42.5(pid=25283) [trial-2369↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25283)] [trial-2369↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 04:16:43.123540 tst cs_paging_gprs_active.py:38: Test FAILED (8.3 sec) 04:16:43.184756 run osmo-hlr_10.42.42.2(pid=25280): ERR: Terminated: ERROR {rc=237} [trial-2369↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25280)] 04:16:43.234825 run osmo-hlr_10.42.42.2(pid=25280): stdout: | (launched: 2022-12-10_04:16:39.900610) 04:16:43.285555 run osmo-hlr_10.42.42.2(pid=25280): stderr: | �[0;m�[1;31m20221210041640094 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210041640094 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210041640095 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210041640095 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210041640095 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210041640095 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210041640110 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2369/run.2022-12-10_03-34-39/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210041640119 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210041640119 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210041640119 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:16:43.328916 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25273): Terminating (SIGTERM) 04:16:43.369807 run iperf3-srv_10.42.42.10(pid=25274): Terminating (SIGTERM) 04:16:43.410734 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25275): Terminating (SIGTERM) 04:16:43.451501 run iperf3-srv_10.42.42.10(pid=25276): Terminating (SIGTERM) 04:16:43.492502 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25279): Terminating (SIGTERM) 04:16:43.533423 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25282): Terminating (SIGTERM) 04:16:43.574402 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25285): Terminating (SIGTERM) 04:16:43.583832 --- ParallelTerminationStrategy: PID 25273 died... 04:16:43.638722 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25273): Terminated: ok {rc=0} 04:16:43.648660 --- ParallelTerminationStrategy: PID 25274 died... 04:16:43.703338 run iperf3-srv_10.42.42.10(pid=25274): Terminated {rc=256} 04:16:43.713266 --- ParallelTerminationStrategy: PID 25275 died... 04:16:43.767988 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25275): Terminated: ok {rc=0} 04:16:43.777948 --- ParallelTerminationStrategy: PID 25276 died... 04:16:43.832995 run iperf3-srv_10.42.42.10(pid=25276): Terminated {rc=256} 04:16:43.842939 --- ParallelTerminationStrategy: PID 25279 died... 04:16:43.898195 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25279): Terminated: ok {rc=0} 04:16:43.908327 --- ParallelTerminationStrategy: PID 25282 died... 04:16:43.963229 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25282): Terminated: ok {rc=0} 04:16:43.973155 --- ParallelTerminationStrategy: PID 25285 died... 04:16:44.027979 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25285): Terminated: ok {rc=0} 04:16:44.113804 bus /gobi_0: Setting Powered False 04:16:45.218647 bus /gobi_0: Setting Powered False 04:16:46.330730 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=25283): Process ended prematurely: osmo-stp_10.42.42.5(pid=25283) [trial-2369↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25283)]