Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=23813): Process ended prematurely: osmo-stp_10.42.42.5(pid=23813) [trial-2372↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23813)]
Standard Output
---------------------------------------------- trial-2372 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 09:33:29.575552 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:33:29.587512 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 09:33:29.732666 tst iperf3.py: using LAC 27471 09:33:29.859141 tst iperf3.py: using RAC 186 09:33:29.986495 tst iperf3.py: using CellId 27471 09:33:30.110175 tst iperf3.py: using BVCI 27472 09:33:30.133745 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:33:30.145190 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:33:30.156365 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:33:30.167900 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:33:30.180418 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:33:30.192503 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:33:30.204372 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:33:30.215829 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:33:30.227555 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 09:33:30.508477 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 09:33:30.636158 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:33:30.994034 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23805): Launched 09:33:31.280313 run iperf3-srv_10.42.42.10(pid=23806): Launched 09:33:31.470456 tst iperf3.py:8: start network... 09:33:31.600874 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:33:32.134944 run create_hlr_db(pid=23807): Launched 09:33:32.313481 bus /gobi_6: Setting Powered False 09:33:33.331660 run create_hlr_db(pid=23807): Terminated: ok {rc=0} 09:33:33.739688 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23809): Launched 09:33:34.049220 run osmo-hlr_10.42.42.2(pid=23810): Launched 09:33:34.161666 run osmo-stp_10.42.42.5: Starting osmo-stp 09:33:34.692314 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23812): Launched 09:33:35.000791 run osmo-stp_10.42.42.5(pid=23813): Launched 09:33:35.122266 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:33:35.661757 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23815): Launched 09:33:35.770844 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:33:36.041762 run patchelf(pid=23816): Launched 09:33:36.220107 run osmo-stp_10.42.42.5(pid=23813): ERR: Terminated: ERROR {rc=1} [trial-2372↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23813)] 09:33:36.350958 run osmo-stp_10.42.42.5(pid=23813): stdout: | (launched: 2022-12-10_09:33:34.847438) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:33:36.482199 run osmo-stp_10.42.42.5(pid=23813): stderr: | �[0;m�[38;5;43m20221210093335021 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210093335021 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210093335022 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210093335022 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210093335022 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210093335022 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210093335023 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:33:36.608673 run osmo-stp_10.42.42.5(pid=23813): stdout: | (launched: 2022-12-10_09:33:34.847438) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:33:36.735009 run osmo-stp_10.42.42.5(pid=23813): stderr: | �[0;m�[38;5;43m20221210093335021 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210093335021 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210093335022 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210093335022 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210093335022 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210093335022 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210093335023 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:33:36.881453 run patchelf(pid=23816): Terminating (SIGINT) 09:33:37.053702 run patchelf(pid=23816): Terminated: ok {rc=0} 09:33:37.085351 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=23813): Process ended prematurely: osmo-stp_10.42.42.5(pid=23813) [trial-2372↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23813)] [trial-2372↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 09:33:37.094660 tst iperf3.py:8: Test FAILED (7.6 sec) 09:33:37.155572 run osmo-hlr_10.42.42.2(pid=23810): ERR: Terminated: ERROR {rc=237} [trial-2372↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23810)] 09:33:37.204821 run osmo-hlr_10.42.42.2(pid=23810): stdout: | (launched: 2022-12-10_09:33:33.895148) 09:33:37.254736 run osmo-hlr_10.42.42.2(pid=23810): stderr: | �[0;m�[1;31m20221210093334076 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210093334076 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210093334076 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210093334076 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210093334076 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210093334076 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210093334088 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2372/run.2022-12-10_08-20-36/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210093334096 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210093334096 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210093334097 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:33:37.296323 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23805): Terminating (SIGTERM) 09:33:37.335791 run iperf3-srv_10.42.42.10(pid=23806): Terminating (SIGTERM) 09:33:37.375090 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23809): Terminating (SIGTERM) 09:33:37.414648 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23812): Terminating (SIGTERM) 09:33:37.454100 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23815): Terminating (SIGTERM) 09:33:37.463554 --- ParallelTerminationStrategy: PID 23805 died... 09:33:37.516411 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23805): Terminated: ok {rc=0} 09:33:37.526370 --- ParallelTerminationStrategy: PID 23806 died... 09:33:37.579045 run iperf3-srv_10.42.42.10(pid=23806): Terminated {rc=256} 09:33:37.588746 --- ParallelTerminationStrategy: PID 23809 died... 09:33:37.641631 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23809): Terminated: ok {rc=0} 09:33:37.651601 --- ParallelTerminationStrategy: PID 23812 died... 09:33:37.704351 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23812): Terminated: ok {rc=0} 09:33:37.714226 --- ParallelTerminationStrategy: PID 23815 died... 09:33:37.767359 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23815): Terminated: ok {rc=0} 09:33:37.854565 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23813): Process ended prematurely: osmo-stp_10.42.42.5(pid=23813) [trial-2372↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23813)]