Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=16993): Process ended prematurely: osmo-stp_10.42.42.5(pid=16993) [trial-2372↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16993)]
Standard Output
---------------------------------------------- trial-2372 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 08:27:31.411445 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:27:31.422884 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 08:27:31.551888 tst cs_paging_gprs_active.py: using LAC 27121 08:27:31.701411 tst cs_paging_gprs_active.py: using RAC 91 08:27:31.856189 tst cs_paging_gprs_active.py: using CellId 27121 08:27:32.001332 tst cs_paging_gprs_active.py: using BVCI 27122 08:27:32.025698 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:27:32.037482 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:27:32.049100 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:27:32.061624 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:27:32.074261 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:27:32.087767 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:27:32.100611 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:27:32.112857 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:27:32.124667 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 08:27:32.245830 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 08:27:32.529708 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:27:32.656730 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:27:32.969050 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16982): Launched 08:27:33.229345 run iperf3-srv_10.42.42.10(pid=16983): Launched 08:27:33.414836 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:27:33.541742 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:27:33.855397 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16984): Launched 08:27:34.116361 run iperf3-srv_10.42.42.10(pid=16985): Launched 08:27:34.302228 tst cs_paging_gprs_active.py:38: start network... 08:27:34.429577 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:27:34.906309 run create_hlr_db(pid=16986): Launched 08:27:35.080475 bus /gobi_6: Setting Powered False 08:27:36.107921 run create_hlr_db(pid=16986): Terminated: ok {rc=0} 08:27:36.510255 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16989): Launched 08:27:36.814112 run osmo-hlr_10.42.42.2(pid=16990): Launched 08:27:36.931356 run osmo-stp_10.42.42.5: Starting osmo-stp 08:27:37.462289 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16992): Launched 08:27:37.765418 run osmo-stp_10.42.42.5(pid=16993): Launched 08:27:37.876354 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:27:38.401766 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16995): Launched 08:27:38.510012 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:27:38.773075 run patchelf(pid=16996): Launched 08:27:38.949857 run osmo-stp_10.42.42.5(pid=16993): ERR: Terminated: ERROR {rc=1} [trial-2372↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16993)] 08:27:39.079278 run osmo-stp_10.42.42.5(pid=16993): stdout: | (launched: 2022-12-10_08:27:37.616438) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:27:39.209236 run osmo-stp_10.42.42.5(pid=16993): stderr: | �[0;m�[38;5;43m20221210082737787 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210082737787 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210082737788 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210082737788 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210082737788 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210082737789 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210082737789 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:27:39.334292 run osmo-stp_10.42.42.5(pid=16993): stdout: | (launched: 2022-12-10_08:27:37.616438) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:27:39.458452 run osmo-stp_10.42.42.5(pid=16993): stderr: | �[0;m�[38;5;43m20221210082737787 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210082737787 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210082737788 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210082737788 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210082737788 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210082737789 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210082737789 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:27:39.603163 run patchelf(pid=16996): Terminating (SIGINT) 08:27:39.772816 run patchelf(pid=16996): Terminated: ok {rc=0} 08:27:39.803896 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=16993): Process ended prematurely: osmo-stp_10.42.42.5(pid=16993) [trial-2372↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16993)] [trial-2372↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 08:27:39.812982 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 08:27:39.872814 run osmo-hlr_10.42.42.2(pid=16990): ERR: Terminated: ERROR {rc=237} [trial-2372↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16990)] 08:27:39.921456 run osmo-hlr_10.42.42.2(pid=16990): stdout: | (launched: 2022-12-10_08:27:36.665098) 08:27:39.970884 run osmo-hlr_10.42.42.2(pid=16990): stderr: | �[0;m�[1;31m20221210082736841 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210082736841 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210082736841 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210082736841 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210082736841 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210082736841 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210082736853 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2372/run.2022-12-10_08-20-36/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210082736862 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210082736862 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210082736862 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:27:40.012732 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16982): Terminating (SIGTERM) 08:27:40.052381 run iperf3-srv_10.42.42.10(pid=16983): Terminating (SIGTERM) 08:27:40.092009 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16984): Terminating (SIGTERM) 08:27:40.131455 run iperf3-srv_10.42.42.10(pid=16985): Terminating (SIGTERM) 08:27:40.171297 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16989): Terminating (SIGTERM) 08:27:40.210565 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16992): Terminating (SIGTERM) 08:27:40.250117 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16995): Terminating (SIGTERM) 08:27:40.259354 --- ParallelTerminationStrategy: PID 16982 died... 08:27:40.312285 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16982): Terminated: ok {rc=0} 08:27:40.321722 --- ParallelTerminationStrategy: PID 16983 died... 08:27:40.373651 run iperf3-srv_10.42.42.10(pid=16983): Terminated {rc=256} 08:27:40.383140 --- ParallelTerminationStrategy: PID 16984 died... 08:27:40.435198 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16984): Terminated: ok {rc=0} 08:27:40.444740 --- ParallelTerminationStrategy: PID 16985 died... 08:27:40.497289 run iperf3-srv_10.42.42.10(pid=16985): Terminated {rc=256} 08:27:40.506850 --- ParallelTerminationStrategy: PID 16989 died... 08:27:40.559312 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16989): Terminated: ok {rc=0} 08:27:40.568902 --- ParallelTerminationStrategy: PID 16992 died... 08:27:40.621111 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16992): Terminated: ok {rc=0} 08:27:40.630709 --- ParallelTerminationStrategy: PID 16995 died... 08:27:40.682815 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16995): Terminated: ok {rc=0} 08:27:40.764929 bus /gobi_0: Setting Powered False 08:27:41.872473 bus /gobi_0: Setting Powered False 08:27:42.983063 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16993): Process ended prematurely: osmo-stp_10.42.42.5(pid=16993) [trial-2372↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16993)]