Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=18427): Process ended prematurely: osmo-stp_10.42.42.5(pid=18427) [trial-2372↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18427)]
Standard Output
---------------------------------------------- trial-2372 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 08:43:58.080056 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:43:58.091524 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 08:43:58.234689 tst cs_paging_gprs_active.py: using LAC 27209 08:43:58.362310 tst cs_paging_gprs_active.py: using RAC 179 08:43:58.482669 tst cs_paging_gprs_active.py: using CellId 27209 08:43:58.600703 tst cs_paging_gprs_active.py: using BVCI 27210 08:43:58.624069 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:43:58.634947 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:43:58.645632 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:43:58.656484 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:43:58.667505 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:43:58.678301 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:43:58.689202 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:43:58.699796 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:43:58.710774 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 08:43:58.825463 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 08:43:59.109837 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:43:59.237732 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:43:59.552855 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18417): Launched 08:43:59.814867 run iperf3-srv_10.42.42.10(pid=18418): Launched 08:44:00.001311 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:44:00.129405 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:44:00.445276 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18419): Launched 08:44:00.707529 run iperf3-srv_10.42.42.10(pid=18420): Launched 08:44:00.896340 tst cs_paging_gprs_active.py:38: start network... 08:44:01.026958 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:44:01.555970 run create_hlr_db(pid=18421): Launched 08:44:01.736364 bus /gobi_6: Setting Powered False 08:44:02.754286 run create_hlr_db(pid=18421): Terminated: ok {rc=0} 08:44:03.183638 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18423): Launched 08:44:03.507776 run osmo-hlr_10.42.42.2(pid=18424): Launched 08:44:03.626325 run osmo-stp_10.42.42.5: Starting osmo-stp 08:44:04.188511 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18426): Launched 08:44:04.512397 run osmo-stp_10.42.42.5(pid=18427): Launched 08:44:04.630768 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:44:05.195625 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18429): Launched 08:44:05.311769 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:44:05.593175 run patchelf(pid=18430): Launched 08:44:05.782193 run osmo-stp_10.42.42.5(pid=18427): ERR: Terminated: ERROR {rc=1} [trial-2372↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18427)] 08:44:05.920308 run osmo-stp_10.42.42.5(pid=18427): stdout: | (launched: 2022-12-10_08:44:04.353892) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:44:06.058795 run osmo-stp_10.42.42.5(pid=18427): stderr: | �[0;m�[38;5;43m20221210084404547 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210084404547 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210084404547 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210084404547 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210084404548 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210084404548 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210084404548 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:44:06.193732 run osmo-stp_10.42.42.5(pid=18427): stdout: | (launched: 2022-12-10_08:44:04.353892) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:44:06.326694 run osmo-stp_10.42.42.5(pid=18427): stderr: | �[0;m�[38;5;43m20221210084404547 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210084404547 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210084404547 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210084404547 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210084404548 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210084404548 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210084404548 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:44:06.481851 run patchelf(pid=18430): Terminating (SIGINT) 08:44:06.663664 run patchelf(pid=18430): Terminated: ok {rc=0} 08:44:06.696935 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=18427): Process ended prematurely: osmo-stp_10.42.42.5(pid=18427) [trial-2372↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18427)] [trial-2372↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 08:44:06.706818 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 08:44:06.768677 run osmo-hlr_10.42.42.2(pid=18424): ERR: Terminated: ERROR {rc=237} [trial-2372↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18424)] 08:44:06.819220 run osmo-hlr_10.42.42.2(pid=18424): stdout: | (launched: 2022-12-10_08:44:03.349380) 08:44:06.870449 run osmo-hlr_10.42.42.2(pid=18424): stderr: | �[0;m�[1;31m20221210084403548 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210084403548 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210084403548 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210084403548 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210084403548 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210084403548 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210084403599 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2372/run.2022-12-10_08-20-36/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210084403609 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210084403609 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210084403609 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:44:06.914223 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18417): Terminating (SIGTERM) 08:44:06.955504 run iperf3-srv_10.42.42.10(pid=18418): Terminating (SIGTERM) 08:44:06.996429 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18419): Terminating (SIGTERM) 08:44:07.037587 run iperf3-srv_10.42.42.10(pid=18420): Terminating (SIGTERM) 08:44:07.078662 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18423): Terminating (SIGTERM) 08:44:07.119955 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18426): Terminating (SIGTERM) 08:44:07.161346 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18429): Terminating (SIGTERM) 08:44:07.170833 --- ParallelTerminationStrategy: PID 18417 died... 08:44:07.226002 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18417): Terminated: ok {rc=0} 08:44:07.235921 --- ParallelTerminationStrategy: PID 18418 died... 08:44:07.290405 run iperf3-srv_10.42.42.10(pid=18418): Terminated {rc=256} 08:44:07.300237 --- ParallelTerminationStrategy: PID 18419 died... 08:44:07.354993 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18419): Terminated: ok {rc=0} 08:44:07.364885 --- ParallelTerminationStrategy: PID 18420 died... 08:44:07.419352 run iperf3-srv_10.42.42.10(pid=18420): Terminated {rc=256} 08:44:07.429181 --- ParallelTerminationStrategy: PID 18423 died... 08:44:07.483861 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18423): Terminated: ok {rc=0} 08:44:07.493904 --- ParallelTerminationStrategy: PID 18426 died... 08:44:07.548442 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18426): Terminated: ok {rc=0} 08:44:07.558724 --- ParallelTerminationStrategy: PID 18429 died... 08:44:07.613429 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18429): Terminated: ok {rc=0} 08:44:07.699261 bus /gobi_0: Setting Powered False 08:44:08.805374 bus /gobi_0: Setting Powered False 08:44:09.910986 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18427): Process ended prematurely: osmo-stp_10.42.42.5(pid=18427) [trial-2372↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18427)]