Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=19169): Process ended prematurely: osmo-stp_10.42.42.5(pid=19169) [trial-2372↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19169)]
Standard Output
---------------------------------------------- trial-2372 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 08:47:00.383044 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:47:00.394511 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 08:47:00.542452 tst cs_paging_gprs_active.py: using LAC 27224 08:47:00.668114 tst cs_paging_gprs_active.py: using RAC 194 08:47:00.790563 tst cs_paging_gprs_active.py: using CellId 27224 08:47:00.913117 tst cs_paging_gprs_active.py: using BVCI 27225 08:47:00.937624 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:47:00.949443 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:47:00.961062 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:47:00.974344 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:47:00.986934 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:47:00.999267 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:47:01.011183 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:47:01.024579 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:47:01.037342 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 08:47:01.166651 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 08:47:01.487554 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:47:01.627794 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:47:01.991534 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19159): Launched 08:47:02.287650 run iperf3-srv_10.42.42.10(pid=19160): Launched 08:47:02.488613 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:47:02.625218 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:47:02.965734 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19161): Launched 08:47:03.250016 run iperf3-srv_10.42.42.10(pid=19162): Launched 08:47:03.450059 tst cs_paging_gprs_active.py:38: start network... 08:47:03.586202 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:47:04.110462 run create_hlr_db(pid=19163): Launched 08:47:04.298451 bus /gobi_6: Setting Powered False 08:47:05.319682 run create_hlr_db(pid=19163): Terminated: ok {rc=0} 08:47:05.733679 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19165): Launched 08:47:06.043489 run osmo-hlr_10.42.42.2(pid=19166): Launched 08:47:06.163049 run osmo-stp_10.42.42.5: Starting osmo-stp 08:47:06.705458 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19168): Launched 08:47:07.015232 run osmo-stp_10.42.42.5(pid=19169): Launched 08:47:07.127537 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:47:07.664090 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19171): Launched 08:47:07.774007 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:47:08.043770 run patchelf(pid=19172): Launched 08:47:08.222838 run osmo-stp_10.42.42.5(pid=19169): ERR: Terminated: ERROR {rc=1} [trial-2372↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19169)] 08:47:08.354098 run osmo-stp_10.42.42.5(pid=19169): stdout: | (launched: 2022-12-10_08:47:06.861210) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:47:08.485507 run osmo-stp_10.42.42.5(pid=19169): stderr: | �[0;m�[38;5;43m20221210084707036 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210084707036 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210084707036 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210084707036 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210084707037 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210084707037 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210084707037 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:47:08.612815 run osmo-stp_10.42.42.5(pid=19169): stdout: | (launched: 2022-12-10_08:47:06.861210) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:47:08.738952 run osmo-stp_10.42.42.5(pid=19169): stderr: | �[0;m�[38;5;43m20221210084707036 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210084707036 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210084707036 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210084707036 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210084707037 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210084707037 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210084707037 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:47:08.885336 run patchelf(pid=19172): Terminating (SIGINT) 08:47:09.057228 run patchelf(pid=19172): Terminated: ok {rc=0} 08:47:09.088420 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=19169): Process ended prematurely: osmo-stp_10.42.42.5(pid=19169) [trial-2372↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19169)] [trial-2372↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 08:47:09.097618 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 08:47:09.158859 run osmo-hlr_10.42.42.2(pid=19166): ERR: Terminated: ERROR {rc=237} [trial-2372↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19166)] 08:47:09.208464 run osmo-hlr_10.42.42.2(pid=19166): stdout: | (launched: 2022-12-10_08:47:05.889871) 08:47:09.258866 run osmo-hlr_10.42.42.2(pid=19166): stderr: | �[0;m�[1;31m20221210084706070 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210084706070 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210084706070 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210084706070 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210084706070 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210084706070 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210084706083 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2372/run.2022-12-10_08-20-36/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210084706091 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210084706092 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210084706092 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:47:09.301197 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19159): Terminating (SIGTERM) 08:47:09.341679 run iperf3-srv_10.42.42.10(pid=19160): Terminating (SIGTERM) 08:47:09.382352 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19161): Terminating (SIGTERM) 08:47:09.422832 run iperf3-srv_10.42.42.10(pid=19162): Terminating (SIGTERM) 08:47:09.464073 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19165): Terminating (SIGTERM) 08:47:09.503900 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19168): Terminating (SIGTERM) 08:47:09.544452 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19171): Terminating (SIGTERM) 08:47:09.554380 --- ParallelTerminationStrategy: PID 19159 died... 08:47:09.608784 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19159): Terminated: ok {rc=0} 08:47:09.618466 --- ParallelTerminationStrategy: PID 19160 died... 08:47:09.671827 run iperf3-srv_10.42.42.10(pid=19160): Terminated {rc=256} 08:47:09.682033 --- ParallelTerminationStrategy: PID 19161 died... 08:47:09.735816 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19161): Terminated: ok {rc=0} 08:47:09.746024 --- ParallelTerminationStrategy: PID 19162 died... 08:47:09.799463 run iperf3-srv_10.42.42.10(pid=19162): Terminated {rc=256} 08:47:09.809916 --- ParallelTerminationStrategy: PID 19165 died... 08:47:09.864162 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19165): Terminated: ok {rc=0} 08:47:09.873789 --- ParallelTerminationStrategy: PID 19168 died... 08:47:09.927312 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19168): Terminated: ok {rc=0} 08:47:09.937609 --- ParallelTerminationStrategy: PID 19171 died... 08:47:09.991981 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19171): Terminated: ok {rc=0} 08:47:10.080120 bus /gobi_0: Setting Powered False 08:47:11.183405 bus /gobi_0: Setting Powered False 08:47:12.295158 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19169): Process ended prematurely: osmo-stp_10.42.42.5(pid=19169) [trial-2372↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19169)]