Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=18359): Process ended prematurely: osmo-stp_10.42.42.5(pid=18359) [trial-2372↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18359)]
Standard Output
---------------------------------------------- trial-2372 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 08:42:57.888080 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:42:57.899134 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 08:42:58.043192 tst cs_paging_gprs_active.py: using LAC 27204 08:42:58.170362 tst cs_paging_gprs_active.py: using RAC 174 08:42:58.302409 tst cs_paging_gprs_active.py: using CellId 27204 08:42:58.430221 tst cs_paging_gprs_active.py: using BVCI 27205 08:42:58.454890 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:42:58.465911 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:42:58.476632 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:42:58.487435 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:42:58.498120 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:42:58.508775 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:42:58.519664 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:42:58.530459 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:42:58.541361 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 08:42:58.658675 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 08:42:58.951363 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:42:59.086887 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:42:59.425732 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18349): Launched 08:42:59.708552 run iperf3-srv_10.42.42.10(pid=18350): Launched 08:42:59.907846 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:43:00.043092 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:43:00.379855 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18351): Launched 08:43:00.661343 run iperf3-srv_10.42.42.10(pid=18352): Launched 08:43:00.863835 tst cs_paging_gprs_active.py:38: start network... 08:43:01.013660 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:43:01.575914 run create_hlr_db(pid=18353): Launched 08:43:01.769203 bus /sierra_2: Setting Powered False 08:43:02.785333 run create_hlr_db(pid=18353): Terminated: ok {rc=0} 08:43:03.220893 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18355): Launched 08:43:03.547099 run osmo-hlr_10.42.42.2(pid=18356): Launched 08:43:03.664831 run osmo-stp_10.42.42.5: Starting osmo-stp 08:43:04.228323 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18358): Launched 08:43:04.554829 run osmo-stp_10.42.42.5(pid=18359): Launched 08:43:04.672320 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:43:05.241415 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18361): Launched 08:43:05.357228 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:43:05.643249 run patchelf(pid=18362): Launched 08:43:05.832599 run osmo-stp_10.42.42.5(pid=18359): ERR: Terminated: ERROR {rc=1} [trial-2372↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18359)] 08:43:05.971662 run osmo-stp_10.42.42.5(pid=18359): stdout: | (launched: 2022-12-10_08:43:04.393441) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:43:06.111352 run osmo-stp_10.42.42.5(pid=18359): stderr: | �[0;m�[38;5;43m20221210084304589 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210084304589 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210084304589 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210084304590 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210084304590 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210084304590 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210084304590 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:43:06.245677 run osmo-stp_10.42.42.5(pid=18359): stdout: | (launched: 2022-12-10_08:43:04.393441) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:43:06.378741 run osmo-stp_10.42.42.5(pid=18359): stderr: | �[0;m�[38;5;43m20221210084304589 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210084304589 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210084304589 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210084304590 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210084304590 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210084304590 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210084304590 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:43:06.532935 run patchelf(pid=18362): Terminating (SIGINT) 08:43:06.714180 run patchelf(pid=18362): Terminated: ok {rc=0} 08:43:06.747253 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=18359): Process ended prematurely: osmo-stp_10.42.42.5(pid=18359) [trial-2372↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18359)] [trial-2372↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 08:43:06.757015 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 08:43:06.819113 run osmo-hlr_10.42.42.2(pid=18356): ERR: Terminated: ERROR {rc=237} [trial-2372↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18356)] 08:43:06.870211 run osmo-hlr_10.42.42.2(pid=18356): stdout: | (launched: 2022-12-10_08:43:03.385749) 08:43:06.921715 run osmo-hlr_10.42.42.2(pid=18356): stderr: | �[0;m�[1;31m20221210084303587 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210084303587 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210084303587 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210084303587 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210084303587 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210084303587 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210084303599 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2372/run.2022-12-10_08-20-36/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210084303608 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210084303608 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210084303609 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:43:06.965884 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18349): Terminating (SIGTERM) 08:43:07.007471 run iperf3-srv_10.42.42.10(pid=18350): Terminating (SIGTERM) 08:43:07.049211 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18351): Terminating (SIGTERM) 08:43:07.090625 run iperf3-srv_10.42.42.10(pid=18352): Terminating (SIGTERM) 08:43:07.132603 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18355): Terminating (SIGTERM) 08:43:07.174210 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18358): Terminating (SIGTERM) 08:43:07.216046 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18361): Terminating (SIGTERM) 08:43:07.225727 --- ParallelTerminationStrategy: PID 18349 died... 08:43:07.281401 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18349): Terminated: ok {rc=0} 08:43:07.291389 --- ParallelTerminationStrategy: PID 18350 died... 08:43:07.346171 run iperf3-srv_10.42.42.10(pid=18350): Terminated {rc=256} 08:43:07.356009 --- ParallelTerminationStrategy: PID 18351 died... 08:43:07.410644 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18351): Terminated: ok {rc=0} 08:43:07.420418 --- ParallelTerminationStrategy: PID 18352 died... 08:43:07.474961 run iperf3-srv_10.42.42.10(pid=18352): Terminated {rc=256} 08:43:07.484762 --- ParallelTerminationStrategy: PID 18355 died... 08:43:07.539538 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18355): Terminated: ok {rc=0} 08:43:07.549438 --- ParallelTerminationStrategy: PID 18358 died... 08:43:07.604127 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18358): Terminated: ok {rc=0} 08:43:07.614081 --- ParallelTerminationStrategy: PID 18361 died... 08:43:07.669149 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18361): Terminated: ok {rc=0} 08:43:07.755349 bus /gobi_0: Setting Powered False 08:43:08.862172 bus /gobi_0: Setting Powered False 08:43:09.970539 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18359): Process ended prematurely: osmo-stp_10.42.42.5(pid=18359) [trial-2372↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18359)]