Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=20001): Process ended prematurely: osmo-stp_10.42.42.5(pid=20001) [trial-2372↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20001)]
Standard Output
---------------------------------------------- trial-2372 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 08:54:53.565818 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:54:53.577216 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 08:54:53.743641 tst cs_paging_gprs_active.py: using LAC 27266 08:54:53.870289 tst cs_paging_gprs_active.py: using RAC 236 08:54:53.992896 tst cs_paging_gprs_active.py: using CellId 27266 08:54:54.114566 tst cs_paging_gprs_active.py: using BVCI 27267 08:54:54.138308 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:54:54.149504 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:54:54.160418 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:54:54.171946 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:54:54.183174 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:54:54.194537 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:54:54.206074 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:54:54.217083 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:54:54.228309 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 08:54:54.347360 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 08:54:54.638854 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:54:54.773768 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:54:55.109997 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19991): Launched 08:54:55.393340 run iperf3-srv_10.42.42.10(pid=19992): Launched 08:54:55.592610 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:54:55.727825 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:54:56.065576 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19993): Launched 08:54:56.348005 run iperf3-srv_10.42.42.10(pid=19994): Launched 08:54:56.546492 tst cs_paging_gprs_active.py:38: start network... 08:54:56.681873 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:54:57.201440 run create_hlr_db(pid=19995): Launched 08:54:57.387464 bus /gobi_6: Setting Powered False 08:54:58.408608 run create_hlr_db(pid=19995): Terminated: ok {rc=0} 08:54:58.819295 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19997): Launched 08:54:59.126679 run osmo-hlr_10.42.42.2(pid=19998): Launched 08:54:59.241800 run osmo-stp_10.42.42.5: Starting osmo-stp 08:54:59.782176 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20000): Launched 08:55:00.089410 run osmo-stp_10.42.42.5(pid=20001): Launched 08:55:00.200692 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:55:00.731720 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20003): Launched 08:55:00.848226 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:55:01.178474 run patchelf(pid=20004): Launched 08:55:01.397998 run osmo-stp_10.42.42.5(pid=20001): ERR: Terminated: ERROR {rc=1} [trial-2372↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20001)] 08:55:01.541354 run osmo-stp_10.42.42.5(pid=20001): stdout: | (launched: 2022-12-10_08:54:59.936775) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:55:01.684342 run osmo-stp_10.42.42.5(pid=20001): stderr: | �[0;m�[38;5;43m20221210085500112 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210085500112 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210085500112 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210085500113 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210085500113 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210085500113 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210085500113 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:55:01.822651 run osmo-stp_10.42.42.5(pid=20001): stdout: | (launched: 2022-12-10_08:54:59.936775) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:55:01.959389 run osmo-stp_10.42.42.5(pid=20001): stderr: | �[0;m�[38;5;43m20221210085500112 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210085500112 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210085500112 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210085500113 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210085500113 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210085500113 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210085500113 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:55:02.118640 run patchelf(pid=20004): Terminating (SIGINT) 08:55:02.302317 run patchelf(pid=20004): Terminated: ok {rc=0} 08:55:02.336242 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=20001): Process ended prematurely: osmo-stp_10.42.42.5(pid=20001) [trial-2372↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20001)] [trial-2372↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 08:55:02.346441 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 08:55:02.409265 run osmo-hlr_10.42.42.2(pid=19998): ERR: Terminated: ERROR {rc=237} [trial-2372↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19998)] 08:55:02.461096 run osmo-hlr_10.42.42.2(pid=19998): stdout: | (launched: 2022-12-10_08:54:58.974151) 08:55:02.513244 run osmo-hlr_10.42.42.2(pid=19998): stderr: | �[0;m�[1;31m20221210085459153 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210085459153 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210085459153 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210085459153 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210085459153 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210085459153 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210085459165 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2372/run.2022-12-10_08-20-36/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210085459175 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210085459175 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210085459175 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:55:02.557748 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19991): Terminating (SIGTERM) 08:55:02.599389 run iperf3-srv_10.42.42.10(pid=19992): Terminating (SIGTERM) 08:55:02.640999 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19993): Terminating (SIGTERM) 08:55:02.682755 run iperf3-srv_10.42.42.10(pid=19994): Terminating (SIGTERM) 08:55:02.724350 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19997): Terminating (SIGTERM) 08:55:02.766129 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20000): Terminating (SIGTERM) 08:55:02.807760 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20003): Terminating (SIGTERM) 08:55:02.817454 --- ParallelTerminationStrategy: PID 19991 died... 08:55:02.873221 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19991): Terminated: ok {rc=0} 08:55:02.883218 --- ParallelTerminationStrategy: PID 19992 died... 08:55:02.938249 run iperf3-srv_10.42.42.10(pid=19992): Terminated {rc=256} 08:55:02.948209 --- ParallelTerminationStrategy: PID 19993 died... 08:55:03.003907 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19993): Terminated: ok {rc=0} 08:55:03.013946 --- ParallelTerminationStrategy: PID 19994 died... 08:55:03.068899 run iperf3-srv_10.42.42.10(pid=19994): Terminated {rc=256} 08:55:03.078946 --- ParallelTerminationStrategy: PID 19997 died... 08:55:03.134045 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19997): Terminated: ok {rc=0} 08:55:03.144085 --- ParallelTerminationStrategy: PID 20000 died... 08:55:03.199287 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20000): Terminated: ok {rc=0} 08:55:03.209222 --- ParallelTerminationStrategy: PID 20003 died... 08:55:03.264179 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20003): Terminated: ok {rc=0} 08:55:03.349832 bus /gobi_0: Setting Powered False 08:55:04.455518 bus /gobi_0: Setting Powered False 08:55:05.561507 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20001): Process ended prematurely: osmo-stp_10.42.42.5(pid=20001) [trial-2372↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20001)]