Failed
gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=20685): Process ended prematurely: osmo-stp_10.42.42.5(pid=20685) [trial-2372↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20685)]
Standard Output
---------------------------------------------- trial-2372 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 09:04:08.246347 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:04:08.257685 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 09:04:08.398569 tst cs_paging_gprs_active.py: using LAC 27315 09:04:08.517276 tst cs_paging_gprs_active.py: using RAC 30 09:04:08.642769 tst cs_paging_gprs_active.py: using CellId 27315 09:04:08.768749 tst cs_paging_gprs_active.py: using BVCI 27316 09:04:08.793482 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:04:08.804922 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:04:08.816385 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:04:08.827857 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:04:08.839386 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:04:08.850819 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:04:08.862360 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:04:08.873758 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:04:08.885549 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 09:04:09.005459 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 09:04:09.285023 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 09:04:09.411942 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:04:09.729201 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20675): Launched 09:04:09.993839 run iperf3-srv_10.42.42.10(pid=20676): Launched 09:04:10.178916 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 09:04:10.305532 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:04:10.621979 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20677): Launched 09:04:10.885748 run iperf3-srv_10.42.42.10(pid=20678): Launched 09:04:11.070411 tst cs_paging_gprs_active.py:38: start network... 09:04:11.196797 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:04:11.679112 run create_hlr_db(pid=20679): Launched 09:04:11.854795 bus /gobi_6: Setting Powered False 09:04:12.876049 run create_hlr_db(pid=20679): Terminated: ok {rc=0} 09:04:13.320442 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20681): Launched 09:04:13.648377 run osmo-hlr_10.42.42.2(pid=20682): Launched 09:04:13.770815 run osmo-stp_10.42.42.5: Starting osmo-stp 09:04:14.332722 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20684): Launched 09:04:14.660102 run osmo-stp_10.42.42.5(pid=20685): Launched 09:04:14.779582 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:04:15.342741 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20687): Launched 09:04:15.457543 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:04:15.741566 run patchelf(pid=20688): Launched 09:04:15.966569 run osmo-stp_10.42.42.5(pid=20685): ERR: Terminated: ERROR {rc=1} [trial-2372↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20685)] 09:04:16.128915 run osmo-stp_10.42.42.5(pid=20685): stdout: | (launched: 2022-12-10_09:04:14.496728) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:04:16.274533 run osmo-stp_10.42.42.5(pid=20685): stderr: | �[0;m�[38;5;43m20221210090414694 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210090414694 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210090414695 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210090414695 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210090414696 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210090414696 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210090414696 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:04:16.408919 run osmo-stp_10.42.42.5(pid=20685): stdout: | (launched: 2022-12-10_09:04:14.496728) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:04:16.539345 run osmo-stp_10.42.42.5(pid=20685): stderr: | �[0;m�[38;5;43m20221210090414694 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210090414694 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210090414695 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210090414695 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210090414696 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210090414696 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210090414696 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:04:16.691626 run patchelf(pid=20688): Terminating (SIGINT) 09:04:16.872342 run patchelf(pid=20688): Terminated: ok {rc=0} 09:04:16.917991 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=20685): Process ended prematurely: osmo-stp_10.42.42.5(pid=20685) [trial-2372↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20685)] [trial-2372↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 09:04:16.932004 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 09:04:17.010165 run osmo-hlr_10.42.42.2(pid=20682): ERR: Terminated: ERROR {rc=237} [trial-2372↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20682)] 09:04:17.072162 run osmo-hlr_10.42.42.2(pid=20682): stdout: | (launched: 2022-12-10_09:04:13.485130) 09:04:17.131554 run osmo-hlr_10.42.42.2(pid=20682): stderr: | �[0;m�[1;31m20221210090413688 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210090413688 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210090413688 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210090413689 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210090413689 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210090413689 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210090413702 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2372/run.2022-12-10_08-20-36/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210090413710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210090413710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210090413710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:04:17.175626 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20675): Terminating (SIGTERM) 09:04:17.229332 run iperf3-srv_10.42.42.10(pid=20676): Terminating (SIGTERM) 09:04:17.272235 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20677): Terminating (SIGTERM) 09:04:17.313397 run iperf3-srv_10.42.42.10(pid=20678): Terminating (SIGTERM) 09:04:17.353783 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20681): Terminating (SIGTERM) 09:04:17.393998 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20684): Terminating (SIGTERM) 09:04:17.434353 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20687): Terminating (SIGTERM) 09:04:17.443804 --- ParallelTerminationStrategy: PID 20675 died... 09:04:17.497484 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20675): Terminated: ok {rc=0} 09:04:17.507870 --- ParallelTerminationStrategy: PID 20676 died... 09:04:17.561316 run iperf3-srv_10.42.42.10(pid=20676): Terminated {rc=256} 09:04:17.571708 --- ParallelTerminationStrategy: PID 20677 died... 09:04:17.625744 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20677): Terminated: ok {rc=0} 09:04:17.635377 --- ParallelTerminationStrategy: PID 20678 died... 09:04:17.688481 run iperf3-srv_10.42.42.10(pid=20678): Terminated {rc=256} 09:04:17.698792 --- ParallelTerminationStrategy: PID 20681 died... 09:04:17.752793 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20681): Terminated: ok {rc=0} 09:04:17.762574 --- ParallelTerminationStrategy: PID 20684 died... 09:04:17.816001 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20684): Terminated: ok {rc=0} 09:04:17.826462 --- ParallelTerminationStrategy: PID 20687 died... 09:04:17.878976 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20687): Terminated: ok {rc=0} 09:04:17.967153 bus /gobi_0: Setting Powered False 09:04:19.070837 bus /gobi_0: Setting Powered False 09:04:20.181174 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20685): Process ended prematurely: osmo-stp_10.42.42.5(pid=20685) [trial-2372↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20685)]