Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=23801): Process ended prematurely: osmo-stp_10.42.42.5(pid=23801) [trial-2372↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23801)]
Standard Output
---------------------------------------------- trial-2372 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 09:33:16.777505 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:33:16.793911 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 09:33:16.951428 tst cs_paging_gprs_active.py: using LAC 27470 09:33:17.101356 tst cs_paging_gprs_active.py: using RAC 185 09:33:17.257345 tst cs_paging_gprs_active.py: using CellId 27470 09:33:17.377614 tst cs_paging_gprs_active.py: using BVCI 27471 09:33:17.401282 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:33:17.412648 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:33:17.423985 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:33:17.436165 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:33:17.447674 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:33:17.459615 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:33:17.471821 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:33:17.483748 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:33:17.495817 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 09:33:17.620578 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 09:33:17.902944 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 09:33:18.030768 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:33:18.348484 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23791): Launched 09:33:18.613089 run iperf3-srv_10.42.42.10(pid=23792): Launched 09:33:18.798999 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 09:33:18.926415 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:33:19.244046 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23793): Launched 09:33:19.509168 run iperf3-srv_10.42.42.10(pid=23794): Launched 09:33:19.695456 tst cs_paging_gprs_active.py:38: start network... 09:33:19.822597 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:33:20.323089 run create_hlr_db(pid=23795): Launched 09:33:20.510797 bus /gobi_6: Setting Powered False 09:33:21.532418 run create_hlr_db(pid=23795): Terminated: ok {rc=0} 09:33:21.944105 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23797): Launched 09:33:22.252548 run osmo-hlr_10.42.42.2(pid=23798): Launched 09:33:22.372344 run osmo-stp_10.42.42.5: Starting osmo-stp 09:33:22.910446 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23800): Launched 09:33:23.219214 run osmo-stp_10.42.42.5(pid=23801): Launched 09:33:23.331374 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:33:23.866643 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23803): Launched 09:33:23.976095 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:33:24.246240 run patchelf(pid=23804): Launched 09:33:24.424449 run osmo-stp_10.42.42.5(pid=23801): ERR: Terminated: ERROR {rc=1} [trial-2372↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23801)] 09:33:24.555008 run osmo-stp_10.42.42.5(pid=23801): stdout: | (launched: 2022-12-10_09:33:23.065845) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:33:24.686216 run osmo-stp_10.42.42.5(pid=23801): stderr: | �[0;m�[38;5;43m20221210093323240 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210093323240 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210093323240 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210093323241 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210093323241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210093323241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210093323241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:33:24.812557 run osmo-stp_10.42.42.5(pid=23801): stdout: | (launched: 2022-12-10_09:33:23.065845) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:33:24.937712 run osmo-stp_10.42.42.5(pid=23801): stderr: | �[0;m�[38;5;43m20221210093323240 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210093323240 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210093323240 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210093323241 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210093323241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210093323241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210093323241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:33:25.084371 run patchelf(pid=23804): Terminating (SIGINT) 09:33:25.256259 run patchelf(pid=23804): Terminated: ok {rc=0} 09:33:25.287821 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=23801): Process ended prematurely: osmo-stp_10.42.42.5(pid=23801) [trial-2372↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23801)] [trial-2372↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 09:33:25.296987 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 09:33:25.357162 run osmo-hlr_10.42.42.2(pid=23798): ERR: Terminated: ERROR {rc=237} [trial-2372↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23798)] 09:33:25.405608 run osmo-hlr_10.42.42.2(pid=23798): stdout: | (launched: 2022-12-10_09:33:22.099034) 09:33:25.455666 run osmo-hlr_10.42.42.2(pid=23798): stderr: | �[0;m�[1;31m20221210093322279 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210093322279 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210093322279 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210093322279 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210093322280 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210093322280 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210093322292 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2372/run.2022-12-10_08-20-36/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210093322302 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210093322302 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210093322302 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:33:25.497403 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23791): Terminating (SIGTERM) 09:33:25.536620 run iperf3-srv_10.42.42.10(pid=23792): Terminating (SIGTERM) 09:33:25.576194 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23793): Terminating (SIGTERM) 09:33:25.615803 run iperf3-srv_10.42.42.10(pid=23794): Terminating (SIGTERM) 09:33:25.655504 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23797): Terminating (SIGTERM) 09:33:25.695194 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23800): Terminating (SIGTERM) 09:33:25.735322 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23803): Terminating (SIGTERM) 09:33:25.744338 --- ParallelTerminationStrategy: PID 23791 died... 09:33:25.797745 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23791): Terminated: ok {rc=0} 09:33:25.807379 --- ParallelTerminationStrategy: PID 23792 died... 09:33:25.860366 run iperf3-srv_10.42.42.10(pid=23792): Terminated {rc=256} 09:33:25.869680 --- ParallelTerminationStrategy: PID 23793 died... 09:33:25.921882 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23793): Terminated: ok {rc=0} 09:33:25.931524 --- ParallelTerminationStrategy: PID 23794 died... 09:33:25.983898 run iperf3-srv_10.42.42.10(pid=23794): Terminated {rc=256} 09:33:25.993884 --- ParallelTerminationStrategy: PID 23797 died... 09:33:26.046637 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23797): Terminated: ok {rc=0} 09:33:26.056119 --- ParallelTerminationStrategy: PID 23800 died... 09:33:26.108693 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23800): Terminated: ok {rc=0} 09:33:26.118262 --- ParallelTerminationStrategy: PID 23803 died... 09:33:26.171078 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23803): Terminated: ok {rc=0} 09:33:26.255127 bus /gobi_0: Setting Powered False 09:33:27.354784 bus /gobi_0: Setting Powered False 09:33:28.464584 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23801): Process ended prematurely: osmo-stp_10.42.42.5(pid=23801) [trial-2372↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23801)]