Failed
gprs:sysmo+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=17061): Process ended prematurely: osmo-stp_10.42.42.5(pid=17061) [trial-2372↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17061)]
Standard Output
---------------------------------------------- trial-2372 gprs:sysmo+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 08:28:30.801536 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:28:30.812663 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 08:28:30.971988 tst cs_paging_gprs_active.py: using LAC 27126 08:28:31.104398 tst cs_paging_gprs_active.py: using RAC 96 08:28:31.227784 tst cs_paging_gprs_active.py: using CellId 27126 08:28:31.350721 tst cs_paging_gprs_active.py: using BVCI 27127 08:28:31.375920 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:28:31.387935 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:28:31.401236 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:28:31.414106 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:28:31.426835 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:28:31.439359 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:28:31.451001 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:28:31.464125 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:28:31.476572 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 08:28:31.618469 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 08:28:31.976412 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:28:32.123004 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:28:32.453859 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17050): Launched 08:28:32.716744 run iperf3-srv_10.42.42.10(pid=17051): Launched 08:28:32.901480 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:28:33.028180 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:28:33.343644 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17052): Launched 08:28:33.606278 run iperf3-srv_10.42.42.10(pid=17053): Launched 08:28:33.790596 tst cs_paging_gprs_active.py:38: start network... 08:28:33.916659 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:28:34.394866 run create_hlr_db(pid=17054): Launched 08:28:34.569545 bus /gobi_6: Setting Powered False 08:28:35.590191 run create_hlr_db(pid=17054): Terminated: ok {rc=0} 08:28:36.022689 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17057): Launched 08:28:36.348003 run osmo-hlr_10.42.42.2(pid=17058): Launched 08:28:36.466119 run osmo-stp_10.42.42.5: Starting osmo-stp 08:28:37.028845 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17060): Launched 08:28:37.354440 run osmo-stp_10.42.42.5(pid=17061): Launched 08:28:37.472004 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:28:38.040701 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17063): Launched 08:28:38.156562 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:28:38.442268 run patchelf(pid=17064): Launched 08:28:38.630612 run osmo-stp_10.42.42.5(pid=17061): ERR: Terminated: ERROR {rc=1} [trial-2372↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17061)] 08:28:38.768487 run osmo-stp_10.42.42.5(pid=17061): stdout: | (launched: 2022-12-10_08:28:37.193012) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:28:38.906201 run osmo-stp_10.42.42.5(pid=17061): stderr: | �[0;m�[38;5;43m20221210082837388 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210082837389 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210082837389 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210082837389 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210082837390 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210082837390 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210082837390 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:28:39.039710 run osmo-stp_10.42.42.5(pid=17061): stdout: | (launched: 2022-12-10_08:28:37.193012) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:28:39.171586 run osmo-stp_10.42.42.5(pid=17061): stderr: | �[0;m�[38;5;43m20221210082837388 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210082837389 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210082837389 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210082837389 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210082837390 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210082837390 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210082837390 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:28:39.325136 run patchelf(pid=17064): Terminating (SIGINT) 08:28:39.505815 run patchelf(pid=17064): Terminated: ok {rc=0} 08:28:39.538849 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=17061): Process ended prematurely: osmo-stp_10.42.42.5(pid=17061) [trial-2372↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17061)] [trial-2372↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 08:28:39.548383 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 08:28:39.610724 run osmo-hlr_10.42.42.2(pid=17058): ERR: Terminated: ERROR {rc=237} [trial-2372↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17058)] 08:28:39.661981 run osmo-hlr_10.42.42.2(pid=17058): stdout: | (launched: 2022-12-10_08:28:36.186765) 08:28:39.713510 run osmo-hlr_10.42.42.2(pid=17058): stderr: | �[0;m�[1;31m20221210082836389 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210082836389 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210082836389 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210082836389 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210082836389 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210082836389 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210082836401 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2372/run.2022-12-10_08-20-36/gprs:sysmo+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210082836409 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210082836409 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210082836409 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:28:39.757256 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17050): Terminating (SIGTERM) 08:28:39.798395 run iperf3-srv_10.42.42.10(pid=17051): Terminating (SIGTERM) 08:28:39.839645 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17052): Terminating (SIGTERM) 08:28:39.880785 run iperf3-srv_10.42.42.10(pid=17053): Terminating (SIGTERM) 08:28:39.922074 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17057): Terminating (SIGTERM) 08:28:39.963255 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17060): Terminating (SIGTERM) 08:28:40.004292 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17063): Terminating (SIGTERM) 08:28:40.013870 --- ParallelTerminationStrategy: PID 17050 died... 08:28:40.069460 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17050): Terminated: ok {rc=0} 08:28:40.079390 --- ParallelTerminationStrategy: PID 17051 died... 08:28:40.134157 run iperf3-srv_10.42.42.10(pid=17051): Terminated {rc=256} 08:28:40.144011 --- ParallelTerminationStrategy: PID 17052 died... 08:28:40.199172 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17052): Terminated: ok {rc=0} 08:28:40.209066 --- ParallelTerminationStrategy: PID 17053 died... 08:28:40.263521 run iperf3-srv_10.42.42.10(pid=17053): Terminated {rc=256} 08:28:40.273814 --- ParallelTerminationStrategy: PID 17057 died... 08:28:40.328852 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17057): Terminated: ok {rc=0} 08:28:40.338832 --- ParallelTerminationStrategy: PID 17060 died... 08:28:40.393955 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17060): Terminated: ok {rc=0} 08:28:40.403902 --- ParallelTerminationStrategy: PID 17063 died... 08:28:40.458624 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17063): Terminated: ok {rc=0} 08:28:40.544648 bus /gobi_0: Setting Powered False 08:28:41.647162 bus /gobi_0: Setting Powered False 08:28:42.756084 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=17061): Process ended prematurely: osmo-stp_10.42.42.5(pid=17061) [trial-2372↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17061)]