Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=18505): Process ended prematurely: osmo-stp_10.42.42.5(pid=18505) [trial-2372↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18505)]
Standard Output
---------------------------------------------- trial-2372 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 08:44:58.206638 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:44:58.217645 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 08:44:58.376233 tst cs_paging_gprs_active.py: using LAC 27214 08:44:58.496682 tst cs_paging_gprs_active.py: using RAC 184 08:44:58.616161 tst cs_paging_gprs_active.py: using CellId 27214 08:44:58.736438 tst cs_paging_gprs_active.py: using BVCI 27215 08:44:58.759922 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:44:58.771023 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:44:58.781918 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:44:58.792729 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:44:58.803673 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:44:58.814732 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:44:58.825863 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:44:58.836734 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:44:58.847858 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 08:44:58.962774 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 08:44:59.243194 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:44:59.371551 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:44:59.689767 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18485): Launched 08:44:59.954866 run iperf3-srv_10.42.42.10(pid=18486): Launched 08:45:00.140820 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:45:00.268294 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:45:00.585792 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18487): Launched 08:45:00.859302 run iperf3-srv_10.42.42.10(pid=18488): Launched 08:45:01.073448 tst cs_paging_gprs_active.py:38: start network... 08:45:01.214202 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:45:01.741633 run create_hlr_db(pid=18489): Launched 08:45:01.932530 bus /gobi_6: Setting Powered False 08:45:02.939827 run create_hlr_db(pid=18489): Terminated: ok {rc=0} 08:45:03.380102 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18501): Launched 08:45:03.705994 run osmo-hlr_10.42.42.2(pid=18502): Launched 08:45:03.828889 run osmo-stp_10.42.42.5: Starting osmo-stp 08:45:04.396443 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18504): Launched 08:45:04.723568 run osmo-stp_10.42.42.5(pid=18505): Launched 08:45:04.841367 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:45:05.411205 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18507): Launched 08:45:05.527101 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:45:05.814551 run patchelf(pid=18508): Launched 08:45:06.003347 run osmo-stp_10.42.42.5(pid=18505): ERR: Terminated: ERROR {rc=1} [trial-2372↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18505)] 08:45:06.141715 run osmo-stp_10.42.42.5(pid=18505): stdout: | (launched: 2022-12-10_08:45:04.561598) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:45:06.280692 run osmo-stp_10.42.42.5(pid=18505): stderr: | �[0;m�[38;5;43m20221210084504760 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210084504760 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210084504760 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210084504761 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210084504761 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210084504761 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210084504761 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:45:06.414674 run osmo-stp_10.42.42.5(pid=18505): stdout: | (launched: 2022-12-10_08:45:04.561598) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:45:06.547127 run osmo-stp_10.42.42.5(pid=18505): stderr: | �[0;m�[38;5;43m20221210084504760 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210084504760 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210084504760 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210084504761 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210084504761 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210084504761 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210084504761 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:45:06.701630 run patchelf(pid=18508): Terminating (SIGINT) 08:45:06.882971 run patchelf(pid=18508): Terminated: ok {rc=0} 08:45:06.915845 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=18505): Process ended prematurely: osmo-stp_10.42.42.5(pid=18505) [trial-2372↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18505)] [trial-2372↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 08:45:06.925563 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 08:45:06.987900 run osmo-hlr_10.42.42.2(pid=18502): ERR: Terminated: ERROR {rc=237} [trial-2372↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18502)] 08:45:07.038918 run osmo-hlr_10.42.42.2(pid=18502): stdout: | (launched: 2022-12-10_08:45:03.544773) 08:45:07.090513 run osmo-hlr_10.42.42.2(pid=18502): stderr: | �[0;m�[1;31m20221210084503747 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210084503747 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210084503747 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210084503748 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210084503748 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210084503748 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210084503761 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2372/run.2022-12-10_08-20-36/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210084503769 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210084503769 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210084503769 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:45:07.134953 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18485): Terminating (SIGTERM) 08:45:07.177164 run iperf3-srv_10.42.42.10(pid=18486): Terminating (SIGTERM) 08:45:07.219061 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18487): Terminating (SIGTERM) 08:45:07.260738 run iperf3-srv_10.42.42.10(pid=18488): Terminating (SIGTERM) 08:45:07.303897 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18501): Terminating (SIGTERM) 08:45:07.345456 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18504): Terminating (SIGTERM) 08:45:07.386620 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18507): Terminating (SIGTERM) 08:45:07.396049 --- ParallelTerminationStrategy: PID 18485 died... 08:45:07.451832 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18485): Terminated: ok {rc=0} 08:45:07.461826 --- ParallelTerminationStrategy: PID 18486 died... 08:45:07.516794 run iperf3-srv_10.42.42.10(pid=18486): Terminated {rc=256} 08:45:07.526621 --- ParallelTerminationStrategy: PID 18487 died... 08:45:07.581555 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18487): Terminated: ok {rc=0} 08:45:07.591409 --- ParallelTerminationStrategy: PID 18488 died... 08:45:07.646260 run iperf3-srv_10.42.42.10(pid=18488): Terminated {rc=256} 08:45:07.656063 --- ParallelTerminationStrategy: PID 18501 died... 08:45:07.711086 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18501): Terminated: ok {rc=0} 08:45:07.721020 --- ParallelTerminationStrategy: PID 18504 died... 08:45:07.775980 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18504): Terminated: ok {rc=0} 08:45:07.785947 --- ParallelTerminationStrategy: PID 18507 died... 08:45:07.840889 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18507): Terminated: ok {rc=0} 08:45:07.927440 bus /gobi_0: Setting Powered False 08:45:09.032687 bus /gobi_0: Setting Powered False 08:45:10.142579 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18505): Process ended prematurely: osmo-stp_10.42.42.5(pid=18505) [trial-2372↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18505)]