Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=19930): Process ended prematurely: osmo-stp_10.42.42.5(pid=19930) [trial-2372↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19930)]
Standard Output
---------------------------------------------- trial-2372 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 08:53:53.742630 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:53:53.753767 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 08:53:53.917779 tst cs_paging_gprs_active.py: using LAC 27261 08:53:54.049370 tst cs_paging_gprs_active.py: using RAC 231 08:53:54.174444 tst cs_paging_gprs_active.py: using CellId 27261 08:53:54.299658 tst cs_paging_gprs_active.py: using BVCI 27262 08:53:54.324527 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:53:54.336057 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:53:54.347563 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:53:54.359508 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:53:54.371554 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:53:54.383418 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:53:54.395341 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:53:54.407160 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:53:54.419583 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 08:53:54.540215 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 08:53:54.820237 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:53:54.947600 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:53:55.261753 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19920): Launched 08:53:55.522943 run iperf3-srv_10.42.42.10(pid=19921): Launched 08:53:55.709357 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:53:55.836794 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:53:56.151400 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19922): Launched 08:53:56.413019 run iperf3-srv_10.42.42.10(pid=19923): Launched 08:53:56.598667 tst cs_paging_gprs_active.py:38: start network... 08:53:56.725347 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:53:57.206872 run create_hlr_db(pid=19924): Launched 08:53:57.382188 bus /gobi_6: Setting Powered False 08:53:58.403983 run create_hlr_db(pid=19924): Terminated: ok {rc=0} 08:53:58.832131 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19926): Launched 08:53:59.155673 run osmo-hlr_10.42.42.2(pid=19927): Launched 08:53:59.276005 run osmo-stp_10.42.42.5: Starting osmo-stp 08:53:59.835653 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19929): Launched 08:54:00.156884 run osmo-stp_10.42.42.5(pid=19930): Launched 08:54:00.274069 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:54:00.846867 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19932): Launched 08:54:00.966182 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:54:01.253479 run patchelf(pid=19933): Launched 08:54:01.437922 run osmo-stp_10.42.42.5(pid=19930): ERR: Terminated: ERROR {rc=1} [trial-2372↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19930)] 08:54:01.573335 run osmo-stp_10.42.42.5(pid=19930): stdout: | (launched: 2022-12-10_08:53:59.999441) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:54:01.709761 run osmo-stp_10.42.42.5(pid=19930): stderr: | �[0;m�[38;5;43m20221210085400191 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210085400191 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210085400191 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210085400191 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210085400192 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210085400192 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210085400192 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:54:01.841112 run osmo-stp_10.42.42.5(pid=19930): stdout: | (launched: 2022-12-10_08:53:59.999441) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:54:01.971629 run osmo-stp_10.42.42.5(pid=19930): stderr: | �[0;m�[38;5;43m20221210085400191 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210085400191 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210085400191 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210085400191 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210085400192 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210085400192 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210085400192 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:54:02.122948 run patchelf(pid=19933): Terminating (SIGINT) 08:54:02.305831 run patchelf(pid=19933): Terminated: ok {rc=0} 08:54:02.339161 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=19930): Process ended prematurely: osmo-stp_10.42.42.5(pid=19930) [trial-2372↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19930)] [trial-2372↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 08:54:02.349100 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 08:54:02.411352 run osmo-hlr_10.42.42.2(pid=19927): ERR: Terminated: ERROR {rc=237} [trial-2372↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19927)] 08:54:02.462662 run osmo-hlr_10.42.42.2(pid=19927): stdout: | (launched: 2022-12-10_08:53:58.997295) 08:54:02.514327 run osmo-hlr_10.42.42.2(pid=19927): stderr: | �[0;m�[1;31m20221210085359197 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210085359197 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210085359197 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210085359197 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210085359197 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210085359197 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210085359208 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2372/run.2022-12-10_08-20-36/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210085359216 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210085359216 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210085359216 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:54:02.558038 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19920): Terminating (SIGTERM) 08:54:02.599103 run iperf3-srv_10.42.42.10(pid=19921): Terminating (SIGTERM) 08:54:02.640341 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19922): Terminating (SIGTERM) 08:54:02.681452 run iperf3-srv_10.42.42.10(pid=19923): Terminating (SIGTERM) 08:54:02.722543 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19926): Terminating (SIGTERM) 08:54:02.763691 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19929): Terminating (SIGTERM) 08:54:02.804855 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19932): Terminating (SIGTERM) 08:54:02.814444 --- ParallelTerminationStrategy: PID 19920 died... 08:54:02.869727 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19920): Terminated: ok {rc=0} 08:54:02.879646 --- ParallelTerminationStrategy: PID 19921 died... 08:54:02.934406 run iperf3-srv_10.42.42.10(pid=19921): Terminated {rc=256} 08:54:02.944215 --- ParallelTerminationStrategy: PID 19922 died... 08:54:02.999055 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19922): Terminated: ok {rc=0} 08:54:03.009060 --- ParallelTerminationStrategy: PID 19923 died... 08:54:03.063546 run iperf3-srv_10.42.42.10(pid=19923): Terminated {rc=256} 08:54:03.073519 --- ParallelTerminationStrategy: PID 19926 died... 08:54:03.128901 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19926): Terminated: ok {rc=0} 08:54:03.138976 --- ParallelTerminationStrategy: PID 19929 died... 08:54:03.193669 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19929): Terminated: ok {rc=0} 08:54:03.203652 --- ParallelTerminationStrategy: PID 19932 died... 08:54:03.258518 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19932): Terminated: ok {rc=0} 08:54:03.345324 bus /gobi_0: Setting Powered False 08:54:04.451257 bus /gobi_0: Setting Powered False 08:54:05.558419 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19930): Process ended prematurely: osmo-stp_10.42.42.5(pid=19930) [trial-2372↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19930)]