Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=26142): Process ended prematurely: osmo-stp_10.42.42.5(pid=26142) [trial-2373↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26142)]
Standard Output
---------------------------------------------- trial-2373 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 09:54:59.448942 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:54:59.460293 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 09:54:59.596775 tst cs_paging_gprs_active.py: using LAC 27582 09:54:59.722052 tst cs_paging_gprs_active.py: using RAC 42 09:54:59.847261 tst cs_paging_gprs_active.py: using CellId 27582 09:54:59.972482 tst cs_paging_gprs_active.py: using BVCI 27583 09:54:59.997371 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:55:00.008583 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:55:00.019553 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:55:00.031116 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:55:00.042605 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:55:00.054085 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:55:00.065622 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:55:00.077172 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:55:00.089017 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 09:55:00.206210 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 09:55:00.489497 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 09:55:00.616657 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:55:00.975942 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26129): Launched 09:55:01.264220 run iperf3-srv_10.42.42.10(pid=26130): Launched 09:55:01.454274 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 09:55:01.595055 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:55:01.973844 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26134): Launched 09:55:02.311541 run iperf3-srv_10.42.42.10(pid=26135): Launched 09:55:02.495978 tst cs_paging_gprs_active.py:38: start network... 09:55:02.622447 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:55:03.107159 run create_hlr_db(pid=26136): Launched 09:55:03.280777 bus /gobi_6: Setting Powered False 09:55:04.303210 run create_hlr_db(pid=26136): Terminated: ok {rc=0} 09:55:04.706280 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26138): Launched 09:55:05.007615 run osmo-hlr_10.42.42.2(pid=26139): Launched 09:55:05.117853 run osmo-stp_10.42.42.5: Starting osmo-stp 09:55:05.642591 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26141): Launched 09:55:05.947224 run osmo-stp_10.42.42.5(pid=26142): Launched 09:55:06.057935 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:55:06.587370 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26144): Launched 09:55:06.694684 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:55:06.958220 run patchelf(pid=26145): Launched 09:55:07.135653 run osmo-stp_10.42.42.5(pid=26142): ERR: Terminated: ERROR {rc=1} [trial-2373↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26142)] 09:55:07.265771 run osmo-stp_10.42.42.5(pid=26142): stdout: | (launched: 2022-12-10_09:55:05.796595) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:55:07.395832 run osmo-stp_10.42.42.5(pid=26142): stderr: | �[0;m�[38;5;43m20221210095505965 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210095505965 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210095505966 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210095505966 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210095505968 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210095505969 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210095505969 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:55:07.521312 run osmo-stp_10.42.42.5(pid=26142): stdout: | (launched: 2022-12-10_09:55:05.796595) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:55:07.645583 run osmo-stp_10.42.42.5(pid=26142): stderr: | �[0;m�[38;5;43m20221210095505965 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210095505965 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210095505966 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210095505966 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210095505968 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210095505969 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210095505969 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:55:07.790813 run patchelf(pid=26145): Terminating (SIGINT) 09:55:07.961481 run patchelf(pid=26145): Terminated: ok {rc=0} 09:55:07.992729 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=26142): Process ended prematurely: osmo-stp_10.42.42.5(pid=26142) [trial-2373↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26142)] [trial-2373↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 09:55:08.001914 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 09:55:08.061583 run osmo-hlr_10.42.42.2(pid=26139): ERR: Terminated: ERROR {rc=237} [trial-2373↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26139)] 09:55:08.110330 run osmo-hlr_10.42.42.2(pid=26139): stdout: | (launched: 2022-12-10_09:55:04.860046) 09:55:08.159727 run osmo-hlr_10.42.42.2(pid=26139): stderr: | �[0;m�[1;31m20221210095505037 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210095505037 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210095505037 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210095505037 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210095505037 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210095505037 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210095505049 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2373/run.2022-12-10_09-48-07/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210095505058 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210095505058 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210095505058 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:55:08.203001 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26129): Terminating (SIGTERM) 09:55:08.242888 run iperf3-srv_10.42.42.10(pid=26130): Terminating (SIGTERM) 09:55:08.282714 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26134): Terminating (SIGTERM) 09:55:08.322356 run iperf3-srv_10.42.42.10(pid=26135): Terminating (SIGTERM) 09:55:08.362059 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26138): Terminating (SIGTERM) 09:55:08.401661 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26141): Terminating (SIGTERM) 09:55:08.441266 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26144): Terminating (SIGTERM) 09:55:08.450357 --- ParallelTerminationStrategy: PID 26129 died... 09:55:08.503339 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26129): Terminated: ok {rc=0} 09:55:08.512780 --- ParallelTerminationStrategy: PID 26130 died... 09:55:08.565861 run iperf3-srv_10.42.42.10(pid=26130): Terminated {rc=256} 09:55:08.575275 --- ParallelTerminationStrategy: PID 26134 died... 09:55:08.627842 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26134): Terminated: ok {rc=0} 09:55:08.637341 --- ParallelTerminationStrategy: PID 26135 died... 09:55:08.689722 run iperf3-srv_10.42.42.10(pid=26135): Terminated {rc=256} 09:55:08.699161 --- ParallelTerminationStrategy: PID 26138 died... 09:55:08.752171 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26138): Terminated: ok {rc=0} 09:55:08.761733 --- ParallelTerminationStrategy: PID 26141 died... 09:55:08.814396 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26141): Terminated: ok {rc=0} 09:55:08.823898 --- ParallelTerminationStrategy: PID 26144 died... 09:55:08.876402 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26144): Terminated: ok {rc=0} 09:55:08.964434 bus /gobi_0: Setting Powered False 09:55:10.066528 bus /gobi_0: Setting Powered False 09:55:11.177223 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26142): Process ended prematurely: osmo-stp_10.42.42.5(pid=26142) [trial-2373↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26142)]