Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=27496): Process ended prematurely: osmo-stp_10.42.42.5(pid=27496) [trial-2373↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27496)]
Standard Output
---------------------------------------------- trial-2373 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 10:10:28.720471 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:10:28.731259 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 10:10:28.865644 tst cs_paging_gprs_active.py: using LAC 27665 10:10:28.991498 tst cs_paging_gprs_active.py: using RAC 125 10:10:29.118716 tst cs_paging_gprs_active.py: using CellId 27665 10:10:29.244402 tst cs_paging_gprs_active.py: using BVCI 27666 10:10:29.269635 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:10:29.280587 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:10:29.291462 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:10:29.302638 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:10:29.313577 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:10:29.324641 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:10:29.335931 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:10:29.346952 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:10:29.358281 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 10:10:29.481819 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 10:10:29.779221 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:10:29.914728 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:10:30.250942 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27486): Launched 10:10:30.529378 run iperf3-srv_10.42.42.10(pid=27487): Launched 10:10:30.729303 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:10:30.866164 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:10:31.223051 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27488): Launched 10:10:31.539682 run iperf3-srv_10.42.42.10(pid=27489): Launched 10:10:31.764876 tst cs_paging_gprs_active.py:38: start network... 10:10:31.904484 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:10:32.422000 run create_hlr_db(pid=27490): Launched 10:10:32.610179 bus /sierra_2: Setting Powered False 10:10:33.631875 run create_hlr_db(pid=27490): Terminated: ok {rc=0} 10:10:34.039877 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27492): Launched 10:10:34.342507 run osmo-hlr_10.42.42.2(pid=27493): Launched 10:10:34.459810 run osmo-stp_10.42.42.5: Starting osmo-stp 10:10:34.990244 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27495): Launched 10:10:35.292303 run osmo-stp_10.42.42.5(pid=27496): Launched 10:10:35.402617 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:10:35.935764 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27498): Launched 10:10:36.044218 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:10:36.310500 run patchelf(pid=27499): Launched 10:10:36.489364 run osmo-stp_10.42.42.5(pid=27496): ERR: Terminated: ERROR {rc=1} [trial-2373↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27496)] 10:10:36.619790 run osmo-stp_10.42.42.5(pid=27496): stdout: | (launched: 2022-12-10_10:10:35.143713) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:10:36.750640 run osmo-stp_10.42.42.5(pid=27496): stderr: | �[0;m�[38;5;43m20221210101035313 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210101035313 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210101035314 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210101035314 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210101035314 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210101035315 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210101035315 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:10:36.876383 run osmo-stp_10.42.42.5(pid=27496): stdout: | (launched: 2022-12-10_10:10:35.143713) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:10:37.001139 run osmo-stp_10.42.42.5(pid=27496): stderr: | �[0;m�[38;5;43m20221210101035313 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210101035313 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210101035314 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210101035314 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210101035314 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210101035315 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210101035315 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:10:37.146859 run patchelf(pid=27499): Terminating (SIGINT) 10:10:37.318052 run patchelf(pid=27499): Terminated: ok {rc=0} 10:10:37.349640 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=27496): Process ended prematurely: osmo-stp_10.42.42.5(pid=27496) [trial-2373↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27496)] [trial-2373↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 10:10:37.358849 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 10:10:37.418677 run osmo-hlr_10.42.42.2(pid=27493): ERR: Terminated: ERROR {rc=237} [trial-2373↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27493)] 10:10:37.467437 run osmo-hlr_10.42.42.2(pid=27493): stdout: | (launched: 2022-12-10_10:10:34.194296) 10:10:37.516757 run osmo-hlr_10.42.42.2(pid=27493): stderr: | �[0;m�[1;31m20221210101034372 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210101034372 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210101034372 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210101034372 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210101034372 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210101034372 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210101034385 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2373/run.2022-12-10_09-48-07/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210101034395 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210101034396 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210101034396 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:10:37.559448 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27486): Terminating (SIGTERM) 10:10:37.599449 run iperf3-srv_10.42.42.10(pid=27487): Terminating (SIGTERM) 10:10:37.639343 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27488): Terminating (SIGTERM) 10:10:37.679206 run iperf3-srv_10.42.42.10(pid=27489): Terminating (SIGTERM) 10:10:37.719133 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27492): Terminating (SIGTERM) 10:10:37.759503 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27495): Terminating (SIGTERM) 10:10:37.799796 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27498): Terminating (SIGTERM) 10:10:37.809143 --- ParallelTerminationStrategy: PID 27486 died... 10:10:37.863198 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27486): Terminated: ok {rc=0} 10:10:37.872860 --- ParallelTerminationStrategy: PID 27487 died... 10:10:37.926284 run iperf3-srv_10.42.42.10(pid=27487): Terminated {rc=256} 10:10:37.935895 --- ParallelTerminationStrategy: PID 27488 died... 10:10:37.989058 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27488): Terminated: ok {rc=0} 10:10:37.998711 --- ParallelTerminationStrategy: PID 27489 died... 10:10:38.051974 run iperf3-srv_10.42.42.10(pid=27489): Terminated {rc=256} 10:10:38.061699 --- ParallelTerminationStrategy: PID 27492 died... 10:10:38.115383 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27492): Terminated: ok {rc=0} 10:10:38.125107 --- ParallelTerminationStrategy: PID 27495 died... 10:10:38.179027 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27495): Terminated: ok {rc=0} 10:10:38.188699 --- ParallelTerminationStrategy: PID 27498 died... 10:10:38.242351 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27498): Terminated: ok {rc=0} 10:10:38.331727 bus /gobi_0: Setting Powered False 10:10:39.436129 bus /gobi_0: Setting Powered False 10:10:40.547985 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27496): Process ended prematurely: osmo-stp_10.42.42.5(pid=27496) [trial-2373↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27496)]