Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=28184): Process ended prematurely: osmo-stp_10.42.42.5(pid=28184) [trial-2373↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28184)]
Standard Output
---------------------------------------------- trial-2373 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 10:20:20.210022 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:20:20.221609 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 10:20:20.362210 tst cs_paging_gprs_active.py: using LAC 27717 10:20:20.486586 tst cs_paging_gprs_active.py: using RAC 177 10:20:20.604440 tst cs_paging_gprs_active.py: using CellId 27717 10:20:20.723246 tst cs_paging_gprs_active.py: using BVCI 27718 10:20:20.746535 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:20:20.757495 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:20:20.768259 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:20:20.779046 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:20:20.789693 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:20:20.800393 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:20:20.811304 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:20:20.821941 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:20:20.833211 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 10:20:20.951279 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 10:20:21.247220 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:20:21.383200 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:20:21.719103 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28174): Launched 10:20:21.998585 run iperf3-srv_10.42.42.10(pid=28175): Launched 10:20:22.199112 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:20:22.335229 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:20:22.671665 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28176): Launched 10:20:22.949730 run iperf3-srv_10.42.42.10(pid=28177): Launched 10:20:23.149682 tst cs_paging_gprs_active.py:38: start network... 10:20:23.285222 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:20:23.796046 run create_hlr_db(pid=28178): Launched 10:20:23.984257 bus /gobi_6: Setting Powered False 10:20:25.005449 run create_hlr_db(pid=28178): Terminated: ok {rc=0} 10:20:25.437194 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28180): Launched 10:20:25.761502 run osmo-hlr_10.42.42.2(pid=28181): Launched 10:20:25.879850 run osmo-stp_10.42.42.5: Starting osmo-stp 10:20:26.443763 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28183): Launched 10:20:26.768520 run osmo-stp_10.42.42.5(pid=28184): Launched 10:20:26.886125 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:20:27.452057 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28186): Launched 10:20:27.568421 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:20:27.851183 run patchelf(pid=28187): Launched 10:20:28.042647 run osmo-stp_10.42.42.5(pid=28184): ERR: Terminated: ERROR {rc=1} [trial-2373↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28184)] 10:20:28.182746 run osmo-stp_10.42.42.5(pid=28184): stdout: | (launched: 2022-12-10_10:20:26.608607) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:20:28.322738 run osmo-stp_10.42.42.5(pid=28184): stderr: | �[0;m�[38;5;43m20221210102026800 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210102026800 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210102026801 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210102026801 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210102026801 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210102026802 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210102026802 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:20:28.457987 run osmo-stp_10.42.42.5(pid=28184): stdout: | (launched: 2022-12-10_10:20:26.608607) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:20:28.591807 run osmo-stp_10.42.42.5(pid=28184): stderr: | �[0;m�[38;5;43m20221210102026800 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210102026800 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210102026801 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210102026801 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210102026801 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210102026802 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210102026802 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:20:28.747722 run patchelf(pid=28187): Terminating (SIGINT) 10:20:28.930872 run patchelf(pid=28187): Terminated: ok {rc=0} 10:20:28.964248 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=28184): Process ended prematurely: osmo-stp_10.42.42.5(pid=28184) [trial-2373↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28184)] [trial-2373↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 10:20:28.974178 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 10:20:29.038258 run osmo-hlr_10.42.42.2(pid=28181): ERR: Terminated: ERROR {rc=237} [trial-2373↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28181)] 10:20:29.089966 run osmo-hlr_10.42.42.2(pid=28181): stdout: | (launched: 2022-12-10_10:20:25.602085) 10:20:29.142084 run osmo-hlr_10.42.42.2(pid=28181): stderr: | �[0;m�[1;31m20221210102025801 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210102025801 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210102025801 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210102025801 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210102025801 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210102025801 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210102025828 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2373/run.2022-12-10_09-48-07/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210102025839 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210102025839 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210102025839 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:20:29.186274 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28174): Terminating (SIGTERM) 10:20:29.228312 run iperf3-srv_10.42.42.10(pid=28175): Terminating (SIGTERM) 10:20:29.271070 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28176): Terminating (SIGTERM) 10:20:29.313062 run iperf3-srv_10.42.42.10(pid=28177): Terminating (SIGTERM) 10:20:29.355564 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28180): Terminating (SIGTERM) 10:20:29.397731 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28183): Terminating (SIGTERM) 10:20:29.439653 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28186): Terminating (SIGTERM) 10:20:29.449604 --- ParallelTerminationStrategy: PID 28174 died... 10:20:29.506120 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28174): Terminated: ok {rc=0} 10:20:29.516132 --- ParallelTerminationStrategy: PID 28175 died... 10:20:29.572239 run iperf3-srv_10.42.42.10(pid=28175): Terminated {rc=256} 10:20:29.582327 --- ParallelTerminationStrategy: PID 28176 died... 10:20:29.638364 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28176): Terminated: ok {rc=0} 10:20:29.648612 --- ParallelTerminationStrategy: PID 28177 died... 10:20:29.704576 run iperf3-srv_10.42.42.10(pid=28177): Terminated {rc=256} 10:20:29.714721 --- ParallelTerminationStrategy: PID 28180 died... 10:20:29.770416 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28180): Terminated: ok {rc=0} 10:20:29.780880 --- ParallelTerminationStrategy: PID 28183 died... 10:20:29.837103 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28183): Terminated: ok {rc=0} 10:20:29.847250 --- ParallelTerminationStrategy: PID 28186 died... 10:20:29.903532 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28186): Terminated: ok {rc=0} 10:20:29.991164 bus /gobi_0: Setting Powered False 10:20:31.094007 bus /gobi_0: Setting Powered False 10:20:32.200065 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28184): Process ended prematurely: osmo-stp_10.42.42.5(pid=28184) [trial-2373↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28184)]