Failed
gprs:nanobts+band-1900.cs_paging_gprs_active.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=30892): Process ended prematurely: osmo-stp_10.42.42.5(pid=30892) [trial-2373↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30892)]
Standard Output
---------------------------------------------- trial-2373 gprs:nanobts+band-1900 cs_paging_gprs_active.py ---------------------------------------------- 10:51:26.890698 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:51:26.901818 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 10:51:27.037370 tst cs_paging_gprs_active.py: using LAC 27883 10:51:27.164373 tst cs_paging_gprs_active.py: using RAC 88 10:51:27.290420 tst cs_paging_gprs_active.py: using CellId 27883 10:51:27.415461 tst cs_paging_gprs_active.py: using BVCI 27884 10:51:27.439939 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:51:27.451119 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:51:27.462024 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:51:27.473137 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:51:27.484266 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:51:27.495433 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:51:27.506732 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:51:27.517754 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:51:27.528929 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 10:51:27.649784 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 10:51:27.927593 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:51:28.053077 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:51:28.364502 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30882): Launched 10:51:28.623031 run iperf3-srv_10.42.42.10(pid=30883): Launched 10:51:28.806084 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:51:28.930297 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:51:29.243010 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30884): Launched 10:51:29.500845 run iperf3-srv_10.42.42.10(pid=30885): Launched 10:51:29.683136 tst cs_paging_gprs_active.py:38: start network... 10:51:29.807630 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:51:30.289136 run create_hlr_db(pid=30886): Launched 10:51:30.462082 bus /sierra_2: Setting Powered False 10:51:31.531672 run create_hlr_db(pid=30886): Terminated: ok {rc=0} 10:51:32.010794 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30888): Launched 10:51:32.355067 run osmo-hlr_10.42.42.2(pid=30889): Launched 10:51:32.474331 run osmo-stp_10.42.42.5: Starting osmo-stp 10:51:33.034237 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30891): Launched 10:51:33.355512 run osmo-stp_10.42.42.5(pid=30892): Launched 10:51:33.472899 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:51:34.043654 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30894): Launched 10:51:34.158640 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:51:34.439083 run patchelf(pid=30895): Launched 10:51:34.627903 run osmo-stp_10.42.42.5(pid=30892): ERR: Terminated: ERROR {rc=1} [trial-2373↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30892)] 10:51:34.765959 run osmo-stp_10.42.42.5(pid=30892): stdout: | (launched: 2022-12-10_10:51:33.197792) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:51:34.903936 run osmo-stp_10.42.42.5(pid=30892): stderr: | �[0;m�[38;5;43m20221210105133386 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210105133386 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210105133387 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210105133387 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210105133388 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210105133388 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210105133388 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:51:35.037899 run osmo-stp_10.42.42.5(pid=30892): stdout: | (launched: 2022-12-10_10:51:33.197792) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:51:35.170387 run osmo-stp_10.42.42.5(pid=30892): stderr: | �[0;m�[38;5;43m20221210105133386 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210105133386 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210105133387 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210105133387 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210105133388 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210105133388 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210105133388 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:51:35.324546 run patchelf(pid=30895): Terminating (SIGINT) 10:51:35.505885 run patchelf(pid=30895): Terminated: ok {rc=0} 10:51:35.539083 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=30892): Process ended prematurely: osmo-stp_10.42.42.5(pid=30892) [trial-2373↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30892)] [trial-2373↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38] 10:51:35.549016 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 10:51:35.612559 run osmo-hlr_10.42.42.2(pid=30889): ERR: Terminated: ERROR {rc=237} [trial-2373↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30889)] 10:51:35.664505 run osmo-hlr_10.42.42.2(pid=30889): stdout: | (launched: 2022-12-10_10:51:32.198270) 10:51:35.716680 run osmo-hlr_10.42.42.2(pid=30889): stderr: | �[0;m�[1;31m20221210105132391 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210105132391 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210105132391 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210105132391 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210105132391 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210105132392 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210105132404 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2373/run.2022-12-10_09-48-07/gprs:nanobts+band-1900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210105132412 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210105132412 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210105132413 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:51:35.761238 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30882): Terminating (SIGTERM) 10:51:35.803005 run iperf3-srv_10.42.42.10(pid=30883): Terminating (SIGTERM) 10:51:35.845069 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30884): Terminating (SIGTERM) 10:51:35.886880 run iperf3-srv_10.42.42.10(pid=30885): Terminating (SIGTERM) 10:51:35.928802 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30888): Terminating (SIGTERM) 10:51:35.971063 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30891): Terminating (SIGTERM) 10:51:36.013526 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30894): Terminating (SIGTERM) 10:51:36.023170 --- ParallelTerminationStrategy: PID 30882 died... 10:51:36.079445 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30882): Terminated: ok {rc=0} 10:51:36.089642 --- ParallelTerminationStrategy: PID 30883 died... 10:51:36.145308 run iperf3-srv_10.42.42.10(pid=30883): Terminated {rc=256} 10:51:36.155352 --- ParallelTerminationStrategy: PID 30884 died... 10:51:36.211189 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30884): Terminated: ok {rc=0} 10:51:36.221382 --- ParallelTerminationStrategy: PID 30885 died... 10:51:36.277193 run iperf3-srv_10.42.42.10(pid=30885): Terminated {rc=256} 10:51:36.287427 --- ParallelTerminationStrategy: PID 30888 died... 10:51:36.343199 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30888): Terminated: ok {rc=0} 10:51:36.353277 --- ParallelTerminationStrategy: PID 30891 died... 10:51:36.408888 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30891): Terminated: ok {rc=0} 10:51:36.418934 --- ParallelTerminationStrategy: PID 30894 died... 10:51:36.474728 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30894): Terminated: ok {rc=0} 10:51:36.561714 bus /gobi_0: Setting Powered False 10:51:37.668046 bus /gobi_0: Setting Powered False 10:51:38.778996 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30892): Process ended prematurely: osmo-stp_10.42.42.5(pid=30892) [trial-2373↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30892)]