Failed
gprs:trx-lms+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_trx-lms+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=30036): Process ended prematurely: osmo-stp_10.42.42.5(pid=30036) [trial-2373↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30036)]
Standard Output
---------------------------------------------- trial-2373 gprs:trx-lms+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 10:39:19.047438 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:39:19.058919 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 10:39:19.218406 tst ping_idle_ping.py: using LAC 27817 10:39:19.335673 tst ping_idle_ping.py: using RAC 22 10:39:19.454933 tst ping_idle_ping.py: using CellId 27817 10:39:19.573797 tst ping_idle_ping.py: using BVCI 27818 10:39:19.596810 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:39:19.607791 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:39:19.618538 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:39:19.629276 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:39:19.639996 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:39:19.650758 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:39:19.661574 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:39:19.672234 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 10:39:19.962858 tst ping_idle_ping.py:24: start network... 10:39:20.096785 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:39:20.602985 run create_hlr_db(pid=30030): Launched 10:39:20.789778 bus /gobi_6: Setting Powered False 10:39:21.810483 run create_hlr_db(pid=30030): Terminated: ok {rc=0} 10:39:22.235405 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30032): Launched 10:39:22.553749 run osmo-hlr_10.42.42.2(pid=30033): Launched 10:39:22.673418 run osmo-stp_10.42.42.5: Starting osmo-stp 10:39:23.230877 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30035): Launched 10:39:23.550349 run osmo-stp_10.42.42.5(pid=30036): Launched 10:39:23.667375 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:39:24.225643 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30038): Launched 10:39:24.339513 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:39:24.617770 run patchelf(pid=30039): Launched 10:39:24.805432 run osmo-stp_10.42.42.5(pid=30036): ERR: Terminated: ERROR {rc=1} [trial-2373↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30036)] 10:39:24.942409 run osmo-stp_10.42.42.5(pid=30036): stdout: | (launched: 2022-12-10_10:39:23.393273) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:39:25.079679 run osmo-stp_10.42.42.5(pid=30036): stderr: | �[0;m�[38;5;43m20221210103923585 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210103923585 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210103923585 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210103923586 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210103923586 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210103923586 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210103923586 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:39:25.211952 run osmo-stp_10.42.42.5(pid=30036): stdout: | (launched: 2022-12-10_10:39:23.393273) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:39:25.343348 run osmo-stp_10.42.42.5(pid=30036): stderr: | �[0;m�[38;5;43m20221210103923585 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210103923585 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210103923585 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210103923586 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210103923586 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210103923586 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210103923586 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:39:25.495577 run patchelf(pid=30039): Terminating (SIGINT) 10:39:25.675140 run patchelf(pid=30039): Terminated: ok {rc=0} 10:39:25.707507 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=30036): Process ended prematurely: osmo-stp_10.42.42.5(pid=30036) [trial-2373↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30036)] [trial-2373↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 10:39:25.716691 tst ping_idle_ping.py:27: Test FAILED (6.7 sec) 10:39:25.780520 run osmo-hlr_10.42.42.2(pid=30033): ERR: Terminated: ERROR {rc=237} [trial-2373↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30033)] 10:39:25.832689 run osmo-hlr_10.42.42.2(pid=30033): stdout: | (launched: 2022-12-10_10:39:22.397435) 10:39:25.885190 run osmo-hlr_10.42.42.2(pid=30033): stderr: | �[0;m�[1;31m20221210103922594 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210103922594 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210103922594 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210103922594 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210103922594 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210103922594 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210103922609 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2373/run.2022-12-10_09-48-07/gprs:trx-lms+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210103922619 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210103922619 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210103922619 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:39:25.929815 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30032): Terminating (SIGTERM) 10:39:25.972248 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30035): Terminating (SIGTERM) 10:39:26.015163 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30038): Terminating (SIGTERM) 10:39:26.025128 --- ParallelTerminationStrategy: PID 30032 died... 10:39:26.082015 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30032): Terminated: ok {rc=0} 10:39:26.092375 --- ParallelTerminationStrategy: PID 30035 died... 10:39:26.149101 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30035): Terminated: ok {rc=0} 10:39:26.159305 --- ParallelTerminationStrategy: PID 30038 died... 10:39:26.215963 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30038): Terminated: ok {rc=0} 10:39:26.303888 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30036): Process ended prematurely: osmo-stp_10.42.42.5(pid=30036) [trial-2373↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30036)]