Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=29644): Process ended prematurely: osmo-stp_10.42.42.5(pid=29644) [trial-2373↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29644)]
Standard Output
---------------------------------------------- trial-2373 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 10:37:26.319729 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:37:26.331247 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 10:37:26.475019 tst cs_paging_gprs_active.py: using LAC 27808 10:37:26.606031 tst cs_paging_gprs_active.py: using RAC 13 10:37:26.736096 tst cs_paging_gprs_active.py: using CellId 27808 10:37:26.861191 tst cs_paging_gprs_active.py: using BVCI 27809 10:37:26.885952 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:37:26.897261 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:37:26.908758 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:37:26.921437 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:37:26.932559 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:37:26.943954 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:37:26.955745 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:37:26.967013 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:37:26.978578 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 10:37:27.096743 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 10:37:27.391968 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:37:27.528548 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:37:27.865128 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29634): Launched 10:37:28.143719 run iperf3-srv_10.42.42.10(pid=29635): Launched 10:37:28.342969 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:37:28.479041 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:37:28.816630 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29636): Launched 10:37:29.096757 run iperf3-srv_10.42.42.10(pid=29637): Launched 10:37:29.297041 tst cs_paging_gprs_active.py:38: start network... 10:37:29.433301 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:37:29.945354 run create_hlr_db(pid=29638): Launched 10:37:30.133481 bus /gobi_6: Setting Powered False 10:37:31.223523 run create_hlr_db(pid=29638): Terminated: ok {rc=0} 10:37:31.661114 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29640): Launched 10:37:32.094440 run osmo-hlr_10.42.42.2(pid=29641): Launched 10:37:32.325664 run osmo-stp_10.42.42.5: Starting osmo-stp 10:37:32.865884 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29643): Launched 10:37:33.169689 run osmo-stp_10.42.42.5(pid=29644): Launched 10:37:33.279944 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:37:33.810581 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29646): Launched 10:37:33.918283 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:37:34.182525 run patchelf(pid=29647): Launched 10:37:34.362478 run osmo-stp_10.42.42.5(pid=29644): ERR: Terminated: ERROR {rc=1} [trial-2373↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29644)] 10:37:34.493413 run osmo-stp_10.42.42.5(pid=29644): stdout: | (launched: 2022-12-10_10:37:33.019834) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:37:34.624054 run osmo-stp_10.42.42.5(pid=29644): stderr: | �[0;m�[38;5;43m20221210103733190 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210103733190 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210103733190 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210103733191 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210103733191 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210103733191 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210103733191 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:37:34.750346 run osmo-stp_10.42.42.5(pid=29644): stdout: | (launched: 2022-12-10_10:37:33.019834) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:37:34.875285 run osmo-stp_10.42.42.5(pid=29644): stderr: | �[0;m�[38;5;43m20221210103733190 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210103733190 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210103733190 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210103733191 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210103733191 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210103733191 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210103733191 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:37:35.020786 run patchelf(pid=29647): Terminating (SIGINT) 10:37:35.192327 run patchelf(pid=29647): Terminated: ok {rc=0} 10:37:35.223943 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=29644): Process ended prematurely: osmo-stp_10.42.42.5(pid=29644) [trial-2373↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29644)] [trial-2373↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 10:37:35.233133 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 10:37:35.293189 run osmo-hlr_10.42.42.2(pid=29641): ERR: Terminated: ERROR {rc=237} [trial-2373↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29641)] 10:37:35.342231 run osmo-hlr_10.42.42.2(pid=29641): stdout: | (launched: 2022-12-10_10:37:31.820577) 10:37:35.391698 run osmo-hlr_10.42.42.2(pid=29641): stderr: | �[0;m�[1;31m20221210103732164 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210103732164 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210103732164 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210103732164 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210103732164 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210103732164 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210103732180 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2373/run.2022-12-10_09-48-07/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210103732189 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210103732189 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210103732189 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:37:35.434051 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29634): Terminating (SIGTERM) 10:37:35.474087 run iperf3-srv_10.42.42.10(pid=29635): Terminating (SIGTERM) 10:37:35.514102 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29636): Terminating (SIGTERM) 10:37:35.553984 run iperf3-srv_10.42.42.10(pid=29637): Terminating (SIGTERM) 10:37:35.593893 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29640): Terminating (SIGTERM) 10:37:35.633718 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29643): Terminating (SIGTERM) 10:37:35.673892 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29646): Terminating (SIGTERM) 10:37:35.683138 --- ParallelTerminationStrategy: PID 29634 died... 10:37:35.736480 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29634): Terminated: ok {rc=0} 10:37:35.746224 --- ParallelTerminationStrategy: PID 29635 died... 10:37:35.799069 run iperf3-srv_10.42.42.10(pid=29635): Terminated {rc=256} 10:37:35.808642 --- ParallelTerminationStrategy: PID 29636 died... 10:37:35.861641 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29636): Terminated: ok {rc=0} 10:37:35.871292 --- ParallelTerminationStrategy: PID 29637 died... 10:37:35.924391 run iperf3-srv_10.42.42.10(pid=29637): Terminated {rc=256} 10:37:35.934231 --- ParallelTerminationStrategy: PID 29640 died... 10:37:35.990383 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29640): Terminated: ok {rc=0} 10:37:36.000720 --- ParallelTerminationStrategy: PID 29643 died... 10:37:36.057285 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29643): Terminated: ok {rc=0} 10:37:36.067616 --- ParallelTerminationStrategy: PID 29646 died... 10:37:36.123718 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29646): Terminated: ok {rc=0} 10:37:36.211144 bus /gobi_0: Setting Powered False 10:37:37.317898 bus /gobi_0: Setting Powered False 10:37:38.425552 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29644): Process ended prematurely: osmo-stp_10.42.42.5(pid=29644) [trial-2373↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29644)]