Failed
gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=30606): Process ended prematurely: osmo-stp_10.42.42.5(pid=30606) [trial-2373↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30606)]
Standard Output
---------------------------------------------- trial-2373 gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 10:47:20.359499 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:47:20.371027 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 10:47:20.525565 tst cs_paging_gprs_active.py: using LAC 27860 10:47:20.641881 tst cs_paging_gprs_active.py: using RAC 65 10:47:20.758272 tst cs_paging_gprs_active.py: using CellId 27860 10:47:20.884454 tst cs_paging_gprs_active.py: using BVCI 27861 10:47:20.908807 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:47:20.920396 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:47:20.931638 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:47:20.944024 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:47:20.956022 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:47:20.968042 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:47:20.980034 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:47:20.991871 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:47:21.004131 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:47:21.124593 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:47:21.415424 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:47:21.548647 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:47:21.879710 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30596): Launched 10:47:22.153301 run iperf3-srv_10.42.42.10(pid=30597): Launched 10:47:22.349584 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:47:22.482623 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:47:22.793770 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30598): Launched 10:47:23.050791 run iperf3-srv_10.42.42.10(pid=30599): Launched 10:47:23.233688 tst cs_paging_gprs_active.py:38: start network... 10:47:23.357857 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:47:23.836337 run create_hlr_db(pid=30600): Launched 10:47:24.008479 bus /gobi_6: Setting Powered False 10:47:25.030528 run create_hlr_db(pid=30600): Terminated: ok {rc=0} 10:47:25.429186 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30602): Launched 10:47:25.726884 run osmo-hlr_10.42.42.2(pid=30603): Launched 10:47:25.835345 run osmo-stp_10.42.42.5: Starting osmo-stp 10:47:26.351384 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30605): Launched 10:47:26.648895 run osmo-stp_10.42.42.5(pid=30606): Launched 10:47:26.757253 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:47:27.277416 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30608): Launched 10:47:27.383652 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:47:27.650549 run patchelf(pid=30609): Launched 10:47:27.826511 run osmo-stp_10.42.42.5(pid=30606): ERR: Terminated: ERROR {rc=1} [trial-2373↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30606)] 10:47:27.954680 run osmo-stp_10.42.42.5(pid=30606): stdout: | (launched: 2022-12-10_10:47:26.502299) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:47:28.083594 run osmo-stp_10.42.42.5(pid=30606): stderr: | �[0;m�[38;5;43m20221210104726674 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210104726674 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210104726674 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210104726675 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210104726675 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210104726675 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210104726675 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:47:28.207567 run osmo-stp_10.42.42.5(pid=30606): stdout: | (launched: 2022-12-10_10:47:26.502299) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:47:28.330209 run osmo-stp_10.42.42.5(pid=30606): stderr: | �[0;m�[38;5;43m20221210104726674 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210104726674 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210104726674 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210104726675 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210104726675 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210104726675 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210104726675 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:47:28.474258 run patchelf(pid=30609): Terminating (SIGINT) 10:47:28.643151 run patchelf(pid=30609): Terminated: ok {rc=0} 10:47:28.674408 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=30606): Process ended prematurely: osmo-stp_10.42.42.5(pid=30606) [trial-2373↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30606)] [trial-2373↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 10:47:28.683471 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 10:47:28.743051 run osmo-hlr_10.42.42.2(pid=30603): ERR: Terminated: ERROR {rc=237} [trial-2373↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30603)] 10:47:28.791494 run osmo-hlr_10.42.42.2(pid=30603): stdout: | (launched: 2022-12-10_10:47:25.580331) 10:47:28.840818 run osmo-hlr_10.42.42.2(pid=30603): stderr: | �[0;m�[1;31m20221210104725755 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210104725755 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210104725755 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210104725755 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210104725755 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210104725755 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210104725768 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2373/run.2022-12-10_09-48-07/gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210104725777 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210104725777 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210104725777 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:47:28.882903 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30596): Terminating (SIGTERM) 10:47:28.922595 run iperf3-srv_10.42.42.10(pid=30597): Terminating (SIGTERM) 10:47:28.962300 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30598): Terminating (SIGTERM) 10:47:29.002022 run iperf3-srv_10.42.42.10(pid=30599): Terminating (SIGTERM) 10:47:29.041840 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30602): Terminating (SIGTERM) 10:47:29.081721 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30605): Terminating (SIGTERM) 10:47:29.122002 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30608): Terminating (SIGTERM) 10:47:29.131367 --- ParallelTerminationStrategy: PID 30596 died... 10:47:29.184434 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30596): Terminated: ok {rc=0} 10:47:29.194560 --- ParallelTerminationStrategy: PID 30597 died... 10:47:29.247279 run iperf3-srv_10.42.42.10(pid=30597): Terminated {rc=256} 10:47:29.256903 --- ParallelTerminationStrategy: PID 30598 died... 10:47:29.309243 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30598): Terminated: ok {rc=0} 10:47:29.318970 --- ParallelTerminationStrategy: PID 30599 died... 10:47:29.371554 run iperf3-srv_10.42.42.10(pid=30599): Terminated {rc=256} 10:47:29.381335 --- ParallelTerminationStrategy: PID 30602 died... 10:47:29.433834 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30602): Terminated: ok {rc=0} 10:47:29.443548 --- ParallelTerminationStrategy: PID 30605 died... 10:47:29.496070 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30605): Terminated: ok {rc=0} 10:47:29.505786 --- ParallelTerminationStrategy: PID 30608 died... 10:47:29.558341 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30608): Terminated: ok {rc=0} 10:47:29.641441 bus /gobi_0: Setting Powered False 10:47:30.747004 bus /gobi_0: Setting Powered False 10:47:31.874904 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30606): Process ended prematurely: osmo-stp_10.42.42.5(pid=30606) [trial-2373↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30606)]