Failed
gprs:trx-lms.cs_paging_gprs_active.py (from gprs_trx-lms)
Stacktrace
osmo-stp_10.42.42.5(pid=29577): Process ended prematurely: osmo-stp_10.42.42.5(pid=29577) [trial-2373↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29577)]
Standard Output
---------------------------------------------- trial-2373 gprs:trx-lms cs_paging_gprs_active.py ---------------------------------------------- 10:36:26.765112 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 10:36:26.776285 tst gprs:trx-lms: Using 1 x bts (candidates: 1) 10:36:26.919771 tst cs_paging_gprs_active.py: using LAC 27803 10:36:27.045853 tst cs_paging_gprs_active.py: using RAC 8 10:36:27.172022 tst cs_paging_gprs_active.py: using CellId 27803 10:36:27.303564 tst cs_paging_gprs_active.py: using BVCI 27804 10:36:27.328349 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 10:36:27.339533 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 10:36:27.350405 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 10:36:27.361803 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 10:36:27.373016 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 10:36:27.384230 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 10:36:27.395774 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 10:36:27.406934 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 10:36:27.418631 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 10:36:27.535014 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 10:36:27.830138 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:36:27.966143 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:36:28.302834 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29567): Launched 10:36:28.582118 run iperf3-srv_10.42.42.10(pid=29568): Launched 10:36:28.780621 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:36:28.915977 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:36:29.252730 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29569): Launched 10:36:29.532845 run iperf3-srv_10.42.42.10(pid=29570): Launched 10:36:29.733845 tst cs_paging_gprs_active.py:38: start network... 10:36:29.870178 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:36:30.381363 run create_hlr_db(pid=29571): Launched 10:36:30.570704 bus /sierra_2: Setting Powered False 10:36:31.591808 run create_hlr_db(pid=29571): Terminated: ok {rc=0} 10:36:32.068733 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29573): Launched 10:36:32.379230 run osmo-hlr_10.42.42.2(pid=29574): Launched 10:36:32.491923 run osmo-stp_10.42.42.5: Starting osmo-stp 10:36:33.021388 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29576): Launched 10:36:33.325458 run osmo-stp_10.42.42.5(pid=29577): Launched 10:36:33.435528 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:36:33.966416 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29579): Launched 10:36:34.074529 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:36:34.339686 run patchelf(pid=29580): Launched 10:36:34.518322 run osmo-stp_10.42.42.5(pid=29577): ERR: Terminated: ERROR {rc=1} [trial-2373↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29577)] 10:36:34.648492 run osmo-stp_10.42.42.5(pid=29577): stdout: | (launched: 2022-12-10_10:36:33.175822) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:36:34.779093 run osmo-stp_10.42.42.5(pid=29577): stderr: | �[0;m�[38;5;43m20221210103633345 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210103633345 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210103633346 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210103633346 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210103633347 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210103633347 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210103633347 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:36:34.904917 run osmo-stp_10.42.42.5(pid=29577): stdout: | (launched: 2022-12-10_10:36:33.175822) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:36:35.029936 run osmo-stp_10.42.42.5(pid=29577): stderr: | �[0;m�[38;5;43m20221210103633345 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210103633345 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210103633346 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210103633346 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210103633347 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210103633347 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210103633347 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:36:35.176099 run patchelf(pid=29580): Terminating (SIGINT) 10:36:35.347457 run patchelf(pid=29580): Terminated: ok {rc=0} 10:36:35.378959 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=29577): Process ended prematurely: osmo-stp_10.42.42.5(pid=29577) [trial-2373↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29577)] [trial-2373↪gprs:trx-lms↪cs_paging_gprs_active.py:38] 10:36:35.388118 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 10:36:35.447498 run osmo-hlr_10.42.42.2(pid=29574): ERR: Terminated: ERROR {rc=237} [trial-2373↪gprs:trx-lms↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29574)] 10:36:35.495798 run osmo-hlr_10.42.42.2(pid=29574): stdout: | (launched: 2022-12-10_10:36:32.227196) 10:36:35.544818 run osmo-hlr_10.42.42.2(pid=29574): stderr: | �[0;m�[1;31m20221210103632405 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210103632405 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210103632405 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210103632405 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210103632405 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210103632405 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210103632421 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2373/run.2022-12-10_09-48-07/gprs:trx-lms/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210103632430 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210103632430 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210103632430 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:36:35.586835 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29567): Terminating (SIGTERM) 10:36:35.626306 run iperf3-srv_10.42.42.10(pid=29568): Terminating (SIGTERM) 10:36:35.665689 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29569): Terminating (SIGTERM) 10:36:35.705002 run iperf3-srv_10.42.42.10(pid=29570): Terminating (SIGTERM) 10:36:35.744390 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29573): Terminating (SIGTERM) 10:36:35.783695 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29576): Terminating (SIGTERM) 10:36:35.822938 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29579): Terminating (SIGTERM) 10:36:35.832066 --- ParallelTerminationStrategy: PID 29567 died... 10:36:35.884703 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29567): Terminated: ok {rc=0} 10:36:35.894231 --- ParallelTerminationStrategy: PID 29568 died... 10:36:35.947395 run iperf3-srv_10.42.42.10(pid=29568): Terminated {rc=256} 10:36:35.956842 --- ParallelTerminationStrategy: PID 29569 died... 10:36:36.009545 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29569): Terminated: ok {rc=0} 10:36:36.019073 --- ParallelTerminationStrategy: PID 29570 died... 10:36:36.071558 run iperf3-srv_10.42.42.10(pid=29570): Terminated {rc=256} 10:36:36.081403 --- ParallelTerminationStrategy: PID 29573 died... 10:36:36.133986 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29573): Terminated: ok {rc=0} 10:36:36.143495 --- ParallelTerminationStrategy: PID 29576 died... 10:36:36.196054 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29576): Terminated: ok {rc=0} 10:36:36.205633 --- ParallelTerminationStrategy: PID 29579 died... 10:36:36.258131 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29579): Terminated: ok {rc=0} 10:36:36.346651 bus /gobi_0: Setting Powered False 10:36:37.450126 bus /gobi_0: Setting Powered False 10:36:38.564087 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29577): Process ended prematurely: osmo-stp_10.42.42.5(pid=29577) [trial-2373↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29577)]