Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=4667): Process ended prematurely: osmo-stp_10.42.42.5(pid=4667) [trial-2374↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4667)]
Standard Output
---------------------------------------------- trial-2374 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 11:55:35.211606 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:55:35.222360 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 11:55:35.359440 tst cs_paging_gprs_active.py: using LAC 28222 11:55:35.486221 tst cs_paging_gprs_active.py: using RAC 172 11:55:35.614081 tst cs_paging_gprs_active.py: using CellId 28222 11:55:35.740760 tst cs_paging_gprs_active.py: using BVCI 28223 11:55:35.765781 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:55:35.777192 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:55:35.788247 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:55:35.799826 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:55:35.811223 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:55:35.822807 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:55:35.834762 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:55:35.846152 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:55:35.857743 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:55:35.975111 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:55:36.270521 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:55:36.406925 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:55:36.743080 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4657): Launched 11:55:37.021639 run iperf3-srv_10.42.42.10(pid=4658): Launched 11:55:37.220644 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:55:37.356015 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:55:37.692208 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4659): Launched 11:55:37.971333 run iperf3-srv_10.42.42.10(pid=4660): Launched 11:55:38.170270 tst cs_paging_gprs_active.py:38: start network... 11:55:38.305271 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:55:38.823290 run create_hlr_db(pid=4661): Launched 11:55:39.011009 bus /gobi_6: Setting Powered False 11:55:40.032889 run create_hlr_db(pid=4661): Terminated: ok {rc=0} 11:55:40.440681 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4663): Launched 11:55:40.744792 run osmo-hlr_10.42.42.2(pid=4664): Launched 11:55:40.862164 run osmo-stp_10.42.42.5: Starting osmo-stp 11:55:41.395681 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4666): Launched 11:55:41.698843 run osmo-stp_10.42.42.5(pid=4667): Launched 11:55:41.819470 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:55:42.353280 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4669): Launched 11:55:42.461229 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:55:42.724536 run patchelf(pid=4670): Launched 11:55:42.901964 run osmo-stp_10.42.42.5(pid=4667): ERR: Terminated: ERROR {rc=1} [trial-2374↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4667)] 11:55:43.031651 run osmo-stp_10.42.42.5(pid=4667): stdout: | (launched: 2022-12-10_11:55:41.548863) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:55:43.161913 run osmo-stp_10.42.42.5(pid=4667): stderr: | �[0;m�[38;5;43m20221210115541723 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210115541723 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210115541723 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210115541723 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210115541724 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210115541724 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210115541724 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:55:43.287003 run osmo-stp_10.42.42.5(pid=4667): stdout: | (launched: 2022-12-10_11:55:41.548863) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:55:43.411118 run osmo-stp_10.42.42.5(pid=4667): stderr: | �[0;m�[38;5;43m20221210115541723 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210115541723 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210115541723 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210115541723 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210115541724 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210115541724 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210115541724 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:55:43.555561 run patchelf(pid=4670): Terminating (SIGINT) 11:55:43.726453 run patchelf(pid=4670): Terminated: ok {rc=0} 11:55:43.757709 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=4667): Process ended prematurely: osmo-stp_10.42.42.5(pid=4667) [trial-2374↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4667)] [trial-2374↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 11:55:43.766845 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 11:55:43.827615 run osmo-hlr_10.42.42.2(pid=4664): ERR: Terminated: ERROR {rc=237} [trial-2374↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4664)] 11:55:43.876513 run osmo-hlr_10.42.42.2(pid=4664): stdout: | (launched: 2022-12-10_11:55:40.594414) 11:55:43.926122 run osmo-hlr_10.42.42.2(pid=4664): stderr: | �[0;m�[1;31m20221210115540769 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210115540769 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210115540769 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210115540769 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210115540769 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210115540769 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210115540782 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2374/run.2022-12-10_11-15-10/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210115540791 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210115540791 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210115540791 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:55:43.967935 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4657): Terminating (SIGTERM) 11:55:44.007636 run iperf3-srv_10.42.42.10(pid=4658): Terminating (SIGTERM) 11:55:44.047619 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4659): Terminating (SIGTERM) 11:55:44.087381 run iperf3-srv_10.42.42.10(pid=4660): Terminating (SIGTERM) 11:55:44.127105 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4663): Terminating (SIGTERM) 11:55:44.166774 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4666): Terminating (SIGTERM) 11:55:44.206453 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4669): Terminating (SIGTERM) 11:55:44.215948 --- ParallelTerminationStrategy: PID 4657 died... 11:55:44.269148 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4657): Terminated: ok {rc=0} 11:55:44.278945 --- ParallelTerminationStrategy: PID 4658 died... 11:55:44.332026 run iperf3-srv_10.42.42.10(pid=4658): Terminated {rc=256} 11:55:44.341607 --- ParallelTerminationStrategy: PID 4659 died... 11:55:44.394545 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4659): Terminated: ok {rc=0} 11:55:44.404035 --- ParallelTerminationStrategy: PID 4660 died... 11:55:44.457099 run iperf3-srv_10.42.42.10(pid=4660): Terminated {rc=256} 11:55:44.466613 --- ParallelTerminationStrategy: PID 4663 died... 11:55:44.519404 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4663): Terminated: ok {rc=0} 11:55:44.529257 --- ParallelTerminationStrategy: PID 4666 died... 11:55:44.582222 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4666): Terminated: ok {rc=0} 11:55:44.592075 --- ParallelTerminationStrategy: PID 4669 died... 11:55:44.645370 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4669): Terminated: ok {rc=0} 11:55:44.734017 bus /gobi_0: Setting Powered False 11:55:45.837276 bus /gobi_0: Setting Powered False 11:55:46.972803 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4667): Process ended prematurely: osmo-stp_10.42.42.5(pid=4667) [trial-2374↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4667)]