Failed
gprs:oc2g+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=11117): Process ended prematurely: osmo-stp_10.42.42.5(pid=11117) [trial-2375↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11117)]
Standard Output
---------------------------------------------- trial-2375 gprs:oc2g+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 12:59:41.670020 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:59:41.681775 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 12:59:41.825707 tst ping_idle_ping.py: using LAC 28560 12:59:41.941184 tst ping_idle_ping.py: using RAC 255 12:59:42.057415 tst ping_idle_ping.py: using CellId 28560 12:59:42.174151 tst ping_idle_ping.py: using BVCI 28561 12:59:42.196543 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:59:42.207282 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:59:42.217860 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:59:42.228607 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:59:42.239216 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:59:42.249997 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:59:42.260769 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:59:42.271438 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 12:59:42.557838 tst ping_idle_ping.py:24: start network... 12:59:42.688481 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:59:43.194772 run create_hlr_db(pid=11111): Launched 12:59:43.376315 bus /gobi_6: Setting Powered False 12:59:44.396364 run create_hlr_db(pid=11111): Terminated: ok {rc=0} 12:59:44.788640 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11113): Launched 12:59:45.080535 run osmo-hlr_10.42.42.2(pid=11114): Launched 12:59:45.192638 run osmo-stp_10.42.42.5: Starting osmo-stp 12:59:45.709570 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11116): Launched 12:59:46.139418 run osmo-stp_10.42.42.5(pid=11117): Launched 12:59:46.253402 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:59:46.886632 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11119): Launched 12:59:47.003493 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:59:47.298057 run patchelf(pid=11120): Launched 12:59:47.472271 run osmo-stp_10.42.42.5(pid=11117): ERR: Terminated: ERROR {rc=1} [trial-2375↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11117)] 12:59:47.598427 run osmo-stp_10.42.42.5(pid=11117): stdout: | (launched: 2022-12-10_12:59:45.864212) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:59:47.724321 run osmo-stp_10.42.42.5(pid=11117): stderr: | �[0;m�[38;5;43m20221210125946133 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210125946133 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210125946133 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210125946133 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210125946134 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210125946134 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210125946134 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:59:47.846569 run osmo-stp_10.42.42.5(pid=11117): stdout: | (launched: 2022-12-10_12:59:45.864212) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:59:47.967498 run osmo-stp_10.42.42.5(pid=11117): stderr: | �[0;m�[38;5;43m20221210125946133 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210125946133 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210125946133 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210125946133 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210125946134 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210125946134 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210125946134 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:59:48.109261 run patchelf(pid=11120): Terminating (SIGINT) 12:59:48.275260 run patchelf(pid=11120): Terminated: ok {rc=0} 12:59:48.305400 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=11117): Process ended prematurely: osmo-stp_10.42.42.5(pid=11117) [trial-2375↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11117)] [trial-2375↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 12:59:48.313985 tst ping_idle_ping.py:27: Test FAILED (6.6 sec) 12:59:48.373972 run osmo-hlr_10.42.42.2(pid=11114): ERR: Terminated: ERROR {rc=237} [trial-2375↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11114)] 12:59:48.422753 run osmo-hlr_10.42.42.2(pid=11114): stdout: | (launched: 2022-12-10_12:59:44.937258) 12:59:48.472303 run osmo-hlr_10.42.42.2(pid=11114): stderr: | �[0;m�[1;31m20221210125945114 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210125945114 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210125945114 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210125945114 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210125945114 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210125945114 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210125945126 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2375/run.2022-12-10_12-42-03/gprs:oc2g+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210125945134 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210125945134 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210125945134 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:59:48.514041 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11113): Terminating (SIGTERM) 12:59:48.553975 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11116): Terminating (SIGTERM) 12:59:48.593943 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11119): Terminating (SIGTERM) 12:59:48.603028 --- ParallelTerminationStrategy: PID 11113 died... 12:59:48.655686 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11113): Terminated: ok {rc=0} 12:59:48.665523 --- ParallelTerminationStrategy: PID 11116 died... 12:59:48.718001 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11116): Terminated: ok {rc=0} 12:59:48.727405 --- ParallelTerminationStrategy: PID 11119 died... 12:59:48.779657 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11119): Terminated: ok {rc=0} 12:59:48.865261 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11117): Process ended prematurely: osmo-stp_10.42.42.5(pid=11117) [trial-2375↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11117)]