Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=10895): Process ended prematurely: osmo-stp_10.42.42.5(pid=10895) [trial-2375↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10895)]
Standard Output
---------------------------------------------- trial-2375 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 12:56:53.242648 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:56:53.253322 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 12:56:53.376604 tst cs_paging_gprs_active.py: using LAC 28546 12:56:53.494972 tst cs_paging_gprs_active.py: using RAC 241 12:56:53.612281 tst cs_paging_gprs_active.py: using CellId 28546 12:56:53.730909 tst cs_paging_gprs_active.py: using BVCI 28547 12:56:53.753745 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:56:53.764139 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:56:53.774553 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:56:53.785495 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:56:53.796220 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:56:53.807516 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:56:53.818612 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:56:53.829365 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:56:53.840205 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 12:56:53.956760 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 12:56:54.229373 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 12:56:54.353732 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:56:54.659535 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10885): Launched 12:56:54.914460 run iperf3-srv_10.42.42.10(pid=10886): Launched 12:56:55.094675 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 12:56:55.218070 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:56:55.523369 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10887): Launched 12:56:55.778200 run iperf3-srv_10.42.42.10(pid=10888): Launched 12:56:55.958318 tst cs_paging_gprs_active.py:38: start network... 12:56:56.081855 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:56:56.549390 run create_hlr_db(pid=10889): Launched 12:56:56.720437 bus /gobi_6: Setting Powered False 12:56:57.742408 run create_hlr_db(pid=10889): Terminated: ok {rc=0} 12:56:58.161257 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10891): Launched 12:56:58.476851 run osmo-hlr_10.42.42.2(pid=10892): Launched 12:56:58.594451 run osmo-stp_10.42.42.5: Starting osmo-stp 12:56:59.144204 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10894): Launched 12:56:59.460939 run osmo-stp_10.42.42.5(pid=10895): Launched 12:56:59.576223 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:57:00.128528 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10897): Launched 12:57:00.241852 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:57:00.517289 run patchelf(pid=10898): Launched 12:57:00.702933 run osmo-stp_10.42.42.5(pid=10895): ERR: Terminated: ERROR {rc=1} [trial-2375↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10895)] 12:57:00.843500 run osmo-stp_10.42.42.5(pid=10895): stdout: | (launched: 2022-12-10_12:56:59.305726) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:57:00.993042 run osmo-stp_10.42.42.5(pid=10895): stderr: | �[0;m�[38;5;43m20221210125659495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210125659495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210125659495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210125659496 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210125659496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210125659496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210125659496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:57:01.127347 run osmo-stp_10.42.42.5(pid=10895): stdout: | (launched: 2022-12-10_12:56:59.305726) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:57:01.259830 run osmo-stp_10.42.42.5(pid=10895): stderr: | �[0;m�[38;5;43m20221210125659495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210125659495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210125659495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210125659496 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210125659496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210125659496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210125659496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:57:01.414388 run patchelf(pid=10898): Terminating (SIGINT) 12:57:01.595451 run patchelf(pid=10898): Terminated: ok {rc=0} 12:57:01.629016 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10895): Process ended prematurely: osmo-stp_10.42.42.5(pid=10895) [trial-2375↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10895)] [trial-2375↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 12:57:01.639374 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 12:57:01.703239 run osmo-hlr_10.42.42.2(pid=10892): ERR: Terminated: ERROR {rc=237} [trial-2375↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10892)] 12:57:01.755119 run osmo-hlr_10.42.42.2(pid=10892): stdout: | (launched: 2022-12-10_12:56:58.322337) 12:57:01.807621 run osmo-hlr_10.42.42.2(pid=10892): stderr: | �[0;m�[1;31m20221210125658520 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210125658520 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210125658520 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210125658520 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210125658520 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210125658520 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210125658533 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2375/run.2022-12-10_12-42-03/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210125658541 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210125658541 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210125658541 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:57:01.852316 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10885): Terminating (SIGTERM) 12:57:01.895598 run iperf3-srv_10.42.42.10(pid=10886): Terminating (SIGTERM) 12:57:01.940581 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10887): Terminating (SIGTERM) 12:57:01.984535 run iperf3-srv_10.42.42.10(pid=10888): Terminating (SIGTERM) 12:57:02.028648 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10891): Terminating (SIGTERM) 12:57:02.071538 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10894): Terminating (SIGTERM) 12:57:02.114737 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10897): Terminating (SIGTERM) 12:57:02.124456 --- ParallelTerminationStrategy: PID 10885 died... 12:57:02.179919 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10885): Terminated: ok {rc=0} 12:57:02.189968 --- ParallelTerminationStrategy: PID 10886 died... 12:57:02.244386 run iperf3-srv_10.42.42.10(pid=10886): Terminated {rc=256} 12:57:02.254143 --- ParallelTerminationStrategy: PID 10887 died... 12:57:02.308346 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10887): Terminated: ok {rc=0} 12:57:02.318088 --- ParallelTerminationStrategy: PID 10888 died... 12:57:02.372283 run iperf3-srv_10.42.42.10(pid=10888): Terminated {rc=256} 12:57:02.382036 --- ParallelTerminationStrategy: PID 10891 died... 12:57:02.436369 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10891): Terminated: ok {rc=0} 12:57:02.446188 --- ParallelTerminationStrategy: PID 10894 died... 12:57:02.500799 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10894): Terminated: ok {rc=0} 12:57:02.510750 --- ParallelTerminationStrategy: PID 10897 died... 12:57:02.565726 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10897): Terminated: ok {rc=0} 12:57:02.653218 bus /gobi_0: Setting Powered False 12:57:03.756667 bus /gobi_0: Setting Powered False 12:57:04.867959 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10895): Process ended prematurely: osmo-stp_10.42.42.5(pid=10895) [trial-2375↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10895)]