Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=9680): Process ended prematurely: osmo-stp_10.42.42.5(pid=9680) [trial-2375↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9680)]
Standard Output
---------------------------------------------- trial-2375 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 12:50:57.954723 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:50:57.965661 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 12:50:58.113726 tst cs_paging_gprs_active.py: using LAC 28514 12:50:58.240087 tst cs_paging_gprs_active.py: using RAC 209 12:50:58.363172 tst cs_paging_gprs_active.py: using CellId 28514 12:50:58.488733 tst cs_paging_gprs_active.py: using BVCI 28515 12:50:58.513336 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:50:58.524078 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:50:58.534720 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:50:58.546239 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:50:58.557601 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:50:58.569285 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:50:58.580887 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:50:58.592343 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:50:58.603967 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 12:50:58.728733 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 12:50:59.018680 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 12:50:59.151846 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:50:59.481704 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9670): Launched 12:50:59.760578 run iperf3-srv_10.42.42.10(pid=9671): Launched 12:50:59.955309 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 12:51:00.087893 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:51:00.417293 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9672): Launched 12:51:00.693859 run iperf3-srv_10.42.42.10(pid=9673): Launched 12:51:00.897257 tst cs_paging_gprs_active.py:38: start network... 12:51:01.048427 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:51:01.640781 run create_hlr_db(pid=9674): Launched 12:51:01.843681 bus /gobi_6: Setting Powered False 12:51:02.848327 run create_hlr_db(pid=9674): Terminated: ok {rc=0} 12:51:03.313778 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9676): Launched 12:51:03.656398 run osmo-hlr_10.42.42.2(pid=9677): Launched 12:51:03.779535 run osmo-stp_10.42.42.5: Starting osmo-stp 12:51:04.371072 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9679): Launched 12:51:04.714867 run osmo-stp_10.42.42.5(pid=9680): Launched 12:51:04.837067 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:51:05.430150 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9682): Launched 12:51:05.551401 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:51:05.846974 run patchelf(pid=9683): Launched 12:51:06.044222 run osmo-stp_10.42.42.5(pid=9680): ERR: Terminated: ERROR {rc=1} [trial-2375↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9680)] 12:51:06.187971 run osmo-stp_10.42.42.5(pid=9680): stdout: | (launched: 2022-12-10_12:51:04.545048) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:51:06.331994 run osmo-stp_10.42.42.5(pid=9680): stderr: | �[0;m�[38;5;43m20221210125104746 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210125104746 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210125104746 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210125104747 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210125104747 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210125104747 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210125104747 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:51:06.471641 run osmo-stp_10.42.42.5(pid=9680): stdout: | (launched: 2022-12-10_12:51:04.545048) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:51:06.610283 run osmo-stp_10.42.42.5(pid=9680): stderr: | �[0;m�[38;5;43m20221210125104746 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210125104746 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210125104746 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210125104747 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210125104747 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210125104747 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210125104747 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:51:06.771483 run patchelf(pid=9683): Terminating (SIGINT) 12:51:06.960454 run patchelf(pid=9683): Terminated: ok {rc=0} 12:51:06.995078 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=9680): Process ended prematurely: osmo-stp_10.42.42.5(pid=9680) [trial-2375↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9680)] [trial-2375↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 12:51:07.005132 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 12:51:07.068591 run osmo-hlr_10.42.42.2(pid=9677): ERR: Terminated: ERROR {rc=237} [trial-2375↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9677)] 12:51:07.120370 run osmo-hlr_10.42.42.2(pid=9677): stdout: | (launched: 2022-12-10_12:51:03.486567) 12:51:07.172756 run osmo-hlr_10.42.42.2(pid=9677): stderr: | �[0;m�[1;31m20221210125103688 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210125103688 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210125103688 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210125103688 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210125103688 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210125103688 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210125103700 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2375/run.2022-12-10_12-42-03/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210125103709 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210125103710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210125103710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:51:07.217415 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9670): Terminating (SIGTERM) 12:51:07.259393 run iperf3-srv_10.42.42.10(pid=9671): Terminating (SIGTERM) 12:51:07.301585 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9672): Terminating (SIGTERM) 12:51:07.343635 run iperf3-srv_10.42.42.10(pid=9673): Terminating (SIGTERM) 12:51:07.385784 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9676): Terminating (SIGTERM) 12:51:07.427728 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9679): Terminating (SIGTERM) 12:51:07.469989 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9682): Terminating (SIGTERM) 12:51:07.479722 --- ParallelTerminationStrategy: PID 9670 died... 12:51:07.536084 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9670): Terminated: ok {rc=0} 12:51:07.546256 --- ParallelTerminationStrategy: PID 9671 died... 12:51:07.602130 run iperf3-srv_10.42.42.10(pid=9671): Terminated {rc=256} 12:51:07.612187 --- ParallelTerminationStrategy: PID 9672 died... 12:51:07.668011 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9672): Terminated: ok {rc=0} 12:51:07.678070 --- ParallelTerminationStrategy: PID 9673 died... 12:51:07.733585 run iperf3-srv_10.42.42.10(pid=9673): Terminated {rc=256} 12:51:07.743596 --- ParallelTerminationStrategy: PID 9676 died... 12:51:07.799254 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9676): Terminated: ok {rc=0} 12:51:07.809354 --- ParallelTerminationStrategy: PID 9679 died... 12:51:07.864790 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9679): Terminated: ok {rc=0} 12:51:07.874868 --- ParallelTerminationStrategy: PID 9682 died... 12:51:07.930679 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9682): Terminated: ok {rc=0} 12:51:08.019266 bus /gobi_0: Setting Powered False 12:51:09.124286 bus /gobi_0: Setting Powered False 12:51:10.237335 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9680): Process ended prematurely: osmo-stp_10.42.42.5(pid=9680) [trial-2375↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9680)]