Failed
gprs:trx-b200+mod-bts0-egprs.ping_idle_ping.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=11580): Process ended prematurely: osmo-stp_10.42.42.5(pid=11580) [trial-2375↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11580)]
Standard Output
---------------------------------------------- trial-2375 gprs:trx-b200+mod-bts0-egprs ping_idle_ping.py ---------------------------------------------- 13:06:11.994126 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:06:12.005804 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 13:06:12.150085 tst ping_idle_ping.py: using LAC 28596 13:06:12.275099 tst ping_idle_ping.py: using RAC 36 13:06:12.395870 tst ping_idle_ping.py: using CellId 28596 13:06:12.511358 tst ping_idle_ping.py: using BVCI 28597 13:06:12.534056 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:06:12.544819 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:06:12.555399 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:06:12.566634 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:06:12.577445 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:06:12.588002 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:06:12.599475 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:06:12.610349 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:06:12.886344 tst ping_idle_ping.py:24: start network... 13:06:13.009853 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:06:13.475414 run create_hlr_db(pid=11574): Launched 13:06:13.645572 bus /gobi_6: Setting Powered False 13:06:14.667000 run create_hlr_db(pid=11574): Terminated: ok {rc=0} 13:06:15.085103 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11576): Launched 13:06:15.399281 run osmo-hlr_10.42.42.2(pid=11577): Launched 13:06:15.516995 run osmo-stp_10.42.42.5: Starting osmo-stp 13:06:16.087277 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11579): Launched 13:06:16.520206 run osmo-stp_10.42.42.5(pid=11580): Launched 13:06:16.708510 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:06:17.280885 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11582): Launched 13:06:17.392827 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:06:17.666830 run patchelf(pid=11583): Launched 13:06:17.850709 run osmo-stp_10.42.42.5(pid=11580): ERR: Terminated: ERROR {rc=1} [trial-2375↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11580)] 13:06:17.985388 run osmo-stp_10.42.42.5(pid=11580): stdout: | (launched: 2022-12-10_13:06:16.250527) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:06:18.119998 run osmo-stp_10.42.42.5(pid=11580): stderr: | �[0;m�[38;5;43m20221210130616495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210130616495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210130616495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210130616496 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210130616496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210130616496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210130616496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:06:18.250437 run osmo-stp_10.42.42.5(pid=11580): stdout: | (launched: 2022-12-10_13:06:16.250527) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:06:18.379623 run osmo-stp_10.42.42.5(pid=11580): stderr: | �[0;m�[38;5;43m20221210130616495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210130616495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210130616495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210130616496 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210130616496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210130616496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210130616496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:06:18.530559 run patchelf(pid=11583): Terminating (SIGINT) 13:06:18.707865 run patchelf(pid=11583): Terminated: ok {rc=0} 13:06:18.739972 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=11580): Process ended prematurely: osmo-stp_10.42.42.5(pid=11580) [trial-2375↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11580)] [trial-2375↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27] 13:06:18.749140 tst ping_idle_ping.py:27: Test FAILED (6.7 sec) 13:06:18.811383 run osmo-hlr_10.42.42.2(pid=11577): ERR: Terminated: ERROR {rc=237} [trial-2375↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11577)] 13:06:18.862358 run osmo-hlr_10.42.42.2(pid=11577): stdout: | (launched: 2022-12-10_13:06:15.245488) 13:06:18.914045 run osmo-hlr_10.42.42.2(pid=11577): stderr: | �[0;m�[1;31m20221210130615441 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210130615441 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210130615441 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210130615441 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210130615441 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210130615441 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210130615453 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2375/run.2022-12-10_12-42-03/gprs:trx-b200+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210130615462 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210130615462 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210130615462 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:06:18.958304 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11576): Terminating (SIGTERM) 13:06:19.000059 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11579): Terminating (SIGTERM) 13:06:19.042069 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11582): Terminating (SIGTERM) 13:06:19.051734 --- ParallelTerminationStrategy: PID 11576 died... 13:06:19.107307 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11576): Terminated: ok {rc=0} 13:06:19.117429 --- ParallelTerminationStrategy: PID 11579 died... 13:06:19.172717 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11579): Terminated: ok {rc=0} 13:06:19.182697 --- ParallelTerminationStrategy: PID 11582 died... 13:06:19.238461 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11582): Terminated: ok {rc=0} 13:06:19.325367 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11580): Process ended prematurely: osmo-stp_10.42.42.5(pid=11580) [trial-2375↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11580)]