Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=13405): Process ended prematurely: osmo-stp_10.42.42.5(pid=13405) [trial-2375↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13405)]
Standard Output
---------------------------------------------- trial-2375 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 13:24:18.185960 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:24:18.196660 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 13:24:18.349392 tst cs_paging_gprs_active.py: using LAC 28693 13:24:18.464891 tst cs_paging_gprs_active.py: using RAC 133 13:24:18.582902 tst cs_paging_gprs_active.py: using CellId 28693 13:24:18.699173 tst cs_paging_gprs_active.py: using BVCI 28694 13:24:18.722104 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:24:18.732647 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:24:18.743237 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:24:18.754040 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:24:18.764707 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:24:18.775412 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:24:18.786248 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:24:18.796912 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:24:18.807759 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 13:24:18.926211 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 13:24:19.221087 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:24:19.354514 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:24:19.683344 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13395): Launched 13:24:19.957216 run iperf3-srv_10.42.42.10(pid=13396): Launched 13:24:20.152163 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:24:20.285764 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:24:20.615383 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13397): Launched 13:24:20.888084 run iperf3-srv_10.42.42.10(pid=13398): Launched 13:24:21.082247 tst cs_paging_gprs_active.py:38: start network... 13:24:21.214806 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:24:21.722747 run create_hlr_db(pid=13399): Launched 13:24:21.907916 bus /gobi_6: Setting Powered False 13:24:22.927559 run create_hlr_db(pid=13399): Terminated: ok {rc=0} 13:24:23.326746 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13401): Launched 13:24:23.626120 run osmo-hlr_10.42.42.2(pid=13402): Launched 13:24:23.744792 run osmo-stp_10.42.42.5: Starting osmo-stp 13:24:24.271114 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13404): Launched 13:24:24.570884 run osmo-stp_10.42.42.5(pid=13405): Launched 13:24:24.681246 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:24:25.208166 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13407): Launched 13:24:25.321723 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:24:25.594274 run patchelf(pid=13408): Launched 13:24:25.768761 run osmo-stp_10.42.42.5(pid=13405): ERR: Terminated: ERROR {rc=1} [trial-2375↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13405)] 13:24:25.896788 run osmo-stp_10.42.42.5(pid=13405): stdout: | (launched: 2022-12-10_13:24:24.422543) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:24:26.024784 run osmo-stp_10.42.42.5(pid=13405): stderr: | �[0;m�[38;5;43m20221210132424592 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210132424592 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210132424592 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210132424593 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210132424593 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210132424593 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210132424593 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:24:26.148316 run osmo-stp_10.42.42.5(pid=13405): stdout: | (launched: 2022-12-10_13:24:24.422543) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:24:26.271008 run osmo-stp_10.42.42.5(pid=13405): stderr: | �[0;m�[38;5;43m20221210132424592 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210132424592 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210132424592 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210132424593 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210132424593 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210132424593 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210132424593 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:24:26.414050 run patchelf(pid=13408): Terminating (SIGINT) 13:24:26.583095 run patchelf(pid=13408): Terminated: ok {rc=0} 13:24:26.614052 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13405): Process ended prematurely: osmo-stp_10.42.42.5(pid=13405) [trial-2375↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13405)] [trial-2375↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 13:24:26.623241 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 13:24:26.682838 run osmo-hlr_10.42.42.2(pid=13402): ERR: Terminated: ERROR {rc=237} [trial-2375↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13402)] 13:24:26.731215 run osmo-hlr_10.42.42.2(pid=13402): stdout: | (launched: 2022-12-10_13:24:23.478850) 13:24:26.780663 run osmo-hlr_10.42.42.2(pid=13402): stderr: | �[0;m�[1;31m20221210132423654 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210132423655 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210132423655 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210132423655 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210132423655 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210132423655 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210132423668 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2375/run.2022-12-10_12-42-03/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210132423678 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210132423678 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210132423678 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:24:26.822038 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13395): Terminating (SIGTERM) 13:24:26.861282 run iperf3-srv_10.42.42.10(pid=13396): Terminating (SIGTERM) 13:24:26.900531 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13397): Terminating (SIGTERM) 13:24:26.939426 run iperf3-srv_10.42.42.10(pid=13398): Terminating (SIGTERM) 13:24:26.978477 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13401): Terminating (SIGTERM) 13:24:27.017662 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13404): Terminating (SIGTERM) 13:24:27.056777 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13407): Terminating (SIGTERM) 13:24:27.066007 --- ParallelTerminationStrategy: PID 13395 died... 13:24:27.118723 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13395): Terminated: ok {rc=0} 13:24:27.128379 --- ParallelTerminationStrategy: PID 13396 died... 13:24:27.180809 run iperf3-srv_10.42.42.10(pid=13396): Terminated {rc=256} 13:24:27.190200 --- ParallelTerminationStrategy: PID 13397 died... 13:24:27.243011 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13397): Terminated: ok {rc=0} 13:24:27.252609 --- ParallelTerminationStrategy: PID 13398 died... 13:24:27.305088 run iperf3-srv_10.42.42.10(pid=13398): Terminated {rc=256} 13:24:27.314517 --- ParallelTerminationStrategy: PID 13401 died... 13:24:27.367087 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13401): Terminated: ok {rc=0} 13:24:27.376633 --- ParallelTerminationStrategy: PID 13404 died... 13:24:27.428939 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13404): Terminated: ok {rc=0} 13:24:27.438594 --- ParallelTerminationStrategy: PID 13407 died... 13:24:27.491809 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13407): Terminated: ok {rc=0} 13:24:27.574426 bus /gobi_0: Setting Powered False 13:24:28.680807 bus /gobi_0: Setting Powered False 13:24:29.786953 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13405): Process ended prematurely: osmo-stp_10.42.42.5(pid=13405) [trial-2375↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13405)]