Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=12996): Process ended prematurely: osmo-stp_10.42.42.5(pid=12996) [trial-2375↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12996)]
Standard Output
---------------------------------------------- trial-2375 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 13:22:16.446753 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:22:16.457702 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 13:22:16.625249 tst cs_paging_gprs_active.py: using LAC 28683 13:22:16.749384 tst cs_paging_gprs_active.py: using RAC 123 13:22:16.878512 tst cs_paging_gprs_active.py: using CellId 28683 13:22:17.006884 tst cs_paging_gprs_active.py: using BVCI 28684 13:22:17.032269 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:22:17.044399 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:22:17.056114 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:22:17.068147 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:22:17.080317 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:22:17.091791 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:22:17.103551 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:22:17.114911 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:22:17.126615 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:22:17.244410 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:22:17.524906 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:22:17.651026 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:22:17.963048 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12986): Launched 13:22:18.222609 run iperf3-srv_10.42.42.10(pid=12987): Launched 13:22:18.406809 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:22:18.532735 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:22:18.844453 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12988): Launched 13:22:19.104398 run iperf3-srv_10.42.42.10(pid=12989): Launched 13:22:19.288018 tst cs_paging_gprs_active.py:38: start network... 13:22:19.413943 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:22:19.891061 run create_hlr_db(pid=12990): Launched 13:22:20.064794 bus /gobi_6: Setting Powered False 13:22:21.096845 run create_hlr_db(pid=12990): Terminated: ok {rc=0} 13:22:21.522675 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12992): Launched 13:22:21.845327 run osmo-hlr_10.42.42.2(pid=12993): Launched 13:22:21.963885 run osmo-stp_10.42.42.5: Starting osmo-stp 13:22:22.521941 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12995): Launched 13:22:22.843698 run osmo-stp_10.42.42.5(pid=12996): Launched 13:22:22.961353 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:22:23.522401 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12998): Launched 13:22:23.637469 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:22:23.916909 run patchelf(pid=12999): Launched 13:22:24.105043 run osmo-stp_10.42.42.5(pid=12996): ERR: Terminated: ERROR {rc=1} [trial-2375↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12996)] 13:22:24.242084 run osmo-stp_10.42.42.5(pid=12996): stdout: | (launched: 2022-12-10_13:22:22.685863) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:22:24.379361 run osmo-stp_10.42.42.5(pid=12996): stderr: | �[0;m�[38;5;43m20221210132222876 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210132222877 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210132222877 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210132222877 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210132222878 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210132222878 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210132222878 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:22:24.512856 run osmo-stp_10.42.42.5(pid=12996): stdout: | (launched: 2022-12-10_13:22:22.685863) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:22:24.644689 run osmo-stp_10.42.42.5(pid=12996): stderr: | �[0;m�[38;5;43m20221210132222876 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210132222877 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210132222877 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210132222877 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210132222878 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210132222878 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210132222878 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:22:24.798499 run patchelf(pid=12999): Terminating (SIGINT) 13:22:24.979419 run patchelf(pid=12999): Terminated: ok {rc=0} 13:22:25.012464 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=12996): Process ended prematurely: osmo-stp_10.42.42.5(pid=12996) [trial-2375↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12996)] [trial-2375↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 13:22:25.022162 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 13:22:25.084726 run osmo-hlr_10.42.42.2(pid=12993): ERR: Terminated: ERROR {rc=237} [trial-2375↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12993)] 13:22:25.135862 run osmo-hlr_10.42.42.2(pid=12993): stdout: | (launched: 2022-12-10_13:22:21.686892) 13:22:25.187300 run osmo-hlr_10.42.42.2(pid=12993): stderr: | �[0;m�[1;31m20221210132221884 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210132221884 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210132221884 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210132221884 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210132221884 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210132221884 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210132221897 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2375/run.2022-12-10_12-42-03/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210132221907 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210132221907 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210132221907 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:22:25.230742 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12986): Terminating (SIGTERM) 13:22:25.271607 run iperf3-srv_10.42.42.10(pid=12987): Terminating (SIGTERM) 13:22:25.312570 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12988): Terminating (SIGTERM) 13:22:25.353575 run iperf3-srv_10.42.42.10(pid=12989): Terminating (SIGTERM) 13:22:25.394630 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12992): Terminating (SIGTERM) 13:22:25.435930 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12995): Terminating (SIGTERM) 13:22:25.476903 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12998): Terminating (SIGTERM) 13:22:25.486485 --- ParallelTerminationStrategy: PID 12986 died... 13:22:25.541208 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12986): Terminated: ok {rc=0} 13:22:25.551082 --- ParallelTerminationStrategy: PID 12987 died... 13:22:25.605738 run iperf3-srv_10.42.42.10(pid=12987): Terminated {rc=256} 13:22:25.615624 --- ParallelTerminationStrategy: PID 12988 died... 13:22:25.670090 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12988): Terminated: ok {rc=0} 13:22:25.679932 --- ParallelTerminationStrategy: PID 12989 died... 13:22:25.734262 run iperf3-srv_10.42.42.10(pid=12989): Terminated {rc=256} 13:22:25.744223 --- ParallelTerminationStrategy: PID 12992 died... 13:22:25.798783 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12992): Terminated: ok {rc=0} 13:22:25.808682 --- ParallelTerminationStrategy: PID 12995 died... 13:22:25.863748 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12995): Terminated: ok {rc=0} 13:22:25.873789 --- ParallelTerminationStrategy: PID 12998 died... 13:22:25.928529 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12998): Terminated: ok {rc=0} 13:22:26.014039 bus /gobi_0: Setting Powered False 13:22:27.118050 bus /gobi_0: Setting Powered False 13:22:28.227524 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12996): Process ended prematurely: osmo-stp_10.42.42.5(pid=12996) [trial-2375↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12996)]