Failed
gprs:nanobts+band-900.cs_paging_gprs_active.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=523): Process ended prematurely: osmo-stp_10.42.42.5(pid=523) [trial-2379↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=523)]
Standard Output
---------------------------------------------- trial-2379 gprs:nanobts+band-900 cs_paging_gprs_active.py ---------------------------------------------- 17:16:23.372669 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 17:16:23.384024 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 17:16:23.529903 tst cs_paging_gprs_active.py: using LAC 30335 17:16:23.661377 tst cs_paging_gprs_active.py: using RAC 245 17:16:23.785907 tst cs_paging_gprs_active.py: using CellId 30335 17:16:23.907354 tst cs_paging_gprs_active.py: using BVCI 30336 17:16:23.931155 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 17:16:23.942064 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 17:16:23.952541 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 17:16:23.963488 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 17:16:23.974359 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 17:16:23.988158 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 17:16:23.999728 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 17:16:24.010929 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 17:16:24.022287 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 17:16:24.141138 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 17:16:24.443845 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 17:16:24.582980 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:16:24.928700 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=513): Launched 17:16:25.216088 run iperf3-srv_10.42.42.10(pid=514): Launched 17:16:25.420594 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 17:16:25.559264 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:16:25.906339 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=515): Launched 17:16:26.194105 run iperf3-srv_10.42.42.10(pid=516): Launched 17:16:26.397724 tst cs_paging_gprs_active.py:38: start network... 17:16:26.536022 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:16:27.070755 run create_hlr_db(pid=517): Launched 17:16:27.262431 bus /sierra_2: Setting Powered False 17:16:28.283072 run create_hlr_db(pid=517): Terminated: ok {rc=0} 17:16:28.701367 run pcap-recorder_any(filters='host 10.42.42.2')(pid=519): Launched 17:16:29.019865 run osmo-hlr_10.42.42.2(pid=520): Launched 17:16:29.135209 run osmo-stp_10.42.42.5: Starting osmo-stp 17:16:29.657509 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=522): Launched 17:16:29.959331 run osmo-stp_10.42.42.5(pid=523): Launched 17:16:30.068575 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:16:30.590356 run pcap-recorder_any(filters='host 10.42.42.6')(pid=525): Launched 17:16:30.696734 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:16:30.995009 run patchelf(pid=526): Launched 17:16:31.179543 run osmo-stp_10.42.42.5(pid=523): ERR: Terminated: ERROR {rc=1} [trial-2379↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=523)] 17:16:31.311140 run osmo-stp_10.42.42.5(pid=523): stdout: | (launched: 2022-12-12_17:16:29.810312) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:16:31.442788 run osmo-stp_10.42.42.5(pid=523): stderr: | �[0;m�[38;5;43m20221212171629976 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212171629977 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212171629977 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212171629977 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212171629978 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212171629978 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212171629978 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:16:31.570013 run osmo-stp_10.42.42.5(pid=523): stdout: | (launched: 2022-12-12_17:16:29.810312) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:16:31.696691 run osmo-stp_10.42.42.5(pid=523): stderr: | �[0;m�[38;5;43m20221212171629976 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212171629977 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212171629977 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212171629977 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212171629978 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212171629978 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212171629978 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:16:31.843596 run patchelf(pid=526): Terminating (SIGINT) 17:16:32.015473 run patchelf(pid=526): Terminated: ok {rc=0} 17:16:32.047808 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=523): Process ended prematurely: osmo-stp_10.42.42.5(pid=523) [trial-2379↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=523)] [trial-2379↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38] 17:16:32.058303 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 17:16:32.120720 run osmo-hlr_10.42.42.2(pid=520): ERR: Terminated: ERROR {rc=237} [trial-2379↪gprs:nanobts+band-900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=520)] 17:16:32.170924 run osmo-hlr_10.42.42.2(pid=520): stdout: | (launched: 2022-12-12_17:16:28.871094) 17:16:32.220866 run osmo-hlr_10.42.42.2(pid=520): stderr: | �[0;m�[1;31m20221212171629044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212171629044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212171629044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212171629044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212171629044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212171629044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212171629056 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2379/run.2022-12-12_16-06-15/gprs:nanobts+band-900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212171629065 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212171629065 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212171629066 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:16:32.262247 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=513): Terminating (SIGTERM) 17:16:32.301446 run iperf3-srv_10.42.42.10(pid=514): Terminating (SIGTERM) 17:16:32.340512 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=515): Terminating (SIGTERM) 17:16:32.379561 run iperf3-srv_10.42.42.10(pid=516): Terminating (SIGTERM) 17:16:32.418452 run pcap-recorder_any(filters='host 10.42.42.2')(pid=519): Terminating (SIGTERM) 17:16:32.457404 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=522): Terminating (SIGTERM) 17:16:32.496517 run pcap-recorder_any(filters='host 10.42.42.6')(pid=525): Terminating (SIGTERM) 17:16:32.505928 --- ParallelTerminationStrategy: PID 513 died... 17:16:32.558926 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=513): Terminated: ok {rc=0} 17:16:32.568747 --- ParallelTerminationStrategy: PID 514 died... 17:16:32.621830 run iperf3-srv_10.42.42.10(pid=514): Terminated {rc=256} 17:16:32.631621 --- ParallelTerminationStrategy: PID 515 died... 17:16:32.684577 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=515): Terminated: ok {rc=0} 17:16:32.694062 --- ParallelTerminationStrategy: PID 516 died... 17:16:32.746712 run iperf3-srv_10.42.42.10(pid=516): Terminated {rc=256} 17:16:32.756537 --- ParallelTerminationStrategy: PID 519 died... 17:16:32.809042 run pcap-recorder_any(filters='host 10.42.42.2')(pid=519): Terminated: ok {rc=0} 17:16:32.818951 --- ParallelTerminationStrategy: PID 522 died... 17:16:32.871568 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=522): Terminated: ok {rc=0} 17:16:32.881402 --- ParallelTerminationStrategy: PID 525 died... 17:16:32.933868 run pcap-recorder_any(filters='host 10.42.42.6')(pid=525): Terminated: ok {rc=0} 17:16:33.021218 bus /gobi_0: Setting Powered False 17:16:34.123948 bus /gobi_0: Setting Powered False 17:16:35.231736 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=523): Process ended prematurely: osmo-stp_10.42.42.5(pid=523) [trial-2379↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=523)]