Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=729): Process ended prematurely: osmo-stp_10.42.42.5(pid=729) [trial-2379↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=729)]
Standard Output
---------------------------------------------- trial-2379 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 17:19:22.317204 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:19:22.328545 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 17:19:22.464566 tst cs_paging_gprs_active.py: using LAC 30350 17:19:22.585894 tst cs_paging_gprs_active.py: using RAC 5 17:19:22.700727 tst cs_paging_gprs_active.py: using CellId 30350 17:19:22.820430 tst cs_paging_gprs_active.py: using BVCI 30351 17:19:22.843332 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:19:22.854692 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:19:22.865846 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:19:22.877173 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:19:22.888573 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:19:22.900124 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:19:22.911690 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:19:22.923678 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:19:22.935407 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 17:19:23.057689 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 17:19:23.333970 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 17:19:23.458755 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:19:23.769431 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=719): Launched 17:19:24.028422 run iperf3-srv_10.42.42.10(pid=720): Launched 17:19:24.210856 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 17:19:24.335203 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:19:24.647448 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=721): Launched 17:19:24.906343 run iperf3-srv_10.42.42.10(pid=722): Launched 17:19:25.089209 tst cs_paging_gprs_active.py:38: start network... 17:19:25.214249 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:19:25.690004 run create_hlr_db(pid=723): Launched 17:19:25.862310 bus /gobi_6: Setting Powered False 17:19:26.883177 run create_hlr_db(pid=723): Terminated: ok {rc=0} 17:19:27.285474 run pcap-recorder_any(filters='host 10.42.42.2')(pid=725): Launched 17:19:27.587097 run osmo-hlr_10.42.42.2(pid=726): Launched 17:19:27.704685 run osmo-stp_10.42.42.5: Starting osmo-stp 17:19:28.233370 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=728): Launched 17:19:28.535023 run osmo-stp_10.42.42.5(pid=729): Launched 17:19:28.644019 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:19:29.168050 run pcap-recorder_any(filters='host 10.42.42.6')(pid=731): Launched 17:19:29.275329 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:19:29.538910 run patchelf(pid=732): Launched 17:19:29.714158 run osmo-stp_10.42.42.5(pid=729): ERR: Terminated: ERROR {rc=1} [trial-2379↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=729)] 17:19:29.842290 run osmo-stp_10.42.42.5(pid=729): stdout: | (launched: 2022-12-12_17:19:28.385518) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:19:29.970964 run osmo-stp_10.42.42.5(pid=729): stderr: | �[0;m�[38;5;43m20221212171928553 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212171928553 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212171928553 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212171928554 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212171928554 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212171928554 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212171928554 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:19:30.095353 run osmo-stp_10.42.42.5(pid=729): stdout: | (launched: 2022-12-12_17:19:28.385518) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:19:30.218725 run osmo-stp_10.42.42.5(pid=729): stderr: | �[0;m�[38;5;43m20221212171928553 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212171928553 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212171928553 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212171928554 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212171928554 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212171928554 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212171928554 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:19:30.362115 run patchelf(pid=732): Terminating (SIGINT) 17:19:30.530403 run patchelf(pid=732): Terminated: ok {rc=0} 17:19:30.561591 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=729): Process ended prematurely: osmo-stp_10.42.42.5(pid=729) [trial-2379↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=729)] [trial-2379↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 17:19:30.570917 tst cs_paging_gprs_active.py:38: Test FAILED (8.3 sec) 17:19:30.630999 run osmo-hlr_10.42.42.2(pid=726): ERR: Terminated: ERROR {rc=237} [trial-2379↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=726)] 17:19:30.679499 run osmo-hlr_10.42.42.2(pid=726): stdout: | (launched: 2022-12-12_17:19:27.437315) 17:19:30.729190 run osmo-hlr_10.42.42.2(pid=726): stderr: | �[0;m�[1;31m20221212171927610 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212171927610 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212171927610 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212171927610 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212171927610 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212171927610 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212171927622 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2379/run.2022-12-12_16-06-15/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212171927631 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212171927631 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212171927631 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:19:30.770713 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=719): Terminating (SIGTERM) 17:19:30.810112 run iperf3-srv_10.42.42.10(pid=720): Terminating (SIGTERM) 17:19:30.860697 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=721): Terminating (SIGTERM) 17:19:30.905838 run iperf3-srv_10.42.42.10(pid=722): Terminating (SIGTERM) 17:19:30.951358 run pcap-recorder_any(filters='host 10.42.42.2')(pid=725): Terminating (SIGTERM) 17:19:30.997883 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=728): Terminating (SIGTERM) 17:19:31.042335 run pcap-recorder_any(filters='host 10.42.42.6')(pid=731): Terminating (SIGTERM) 17:19:31.052826 --- ParallelTerminationStrategy: PID 719 died... 17:19:31.111021 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=719): Terminated: ok {rc=0} 17:19:31.121471 --- ParallelTerminationStrategy: PID 720 died... 17:19:31.178827 run iperf3-srv_10.42.42.10(pid=720): Terminated {rc=256} 17:19:31.189853 --- ParallelTerminationStrategy: PID 721 died... 17:19:31.246671 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=721): Terminated: ok {rc=0} 17:19:31.257494 --- ParallelTerminationStrategy: PID 722 died... 17:19:31.314186 run iperf3-srv_10.42.42.10(pid=722): Terminated {rc=256} 17:19:31.324916 --- ParallelTerminationStrategy: PID 725 died... 17:19:31.382548 run pcap-recorder_any(filters='host 10.42.42.2')(pid=725): Terminated: ok {rc=0} 17:19:31.393435 --- ParallelTerminationStrategy: PID 728 died... 17:19:31.449238 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=728): Terminated: ok {rc=0} 17:19:31.459553 --- ParallelTerminationStrategy: PID 731 died... 17:19:31.516443 run pcap-recorder_any(filters='host 10.42.42.6')(pid=731): Terminated: ok {rc=0} 17:19:31.606689 bus /gobi_0: Setting Powered False 17:19:32.706287 bus /gobi_0: Setting Powered False 17:19:33.814165 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=729): Process ended prematurely: osmo-stp_10.42.42.5(pid=729) [trial-2379↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=729)]