Failed
gprs:sysmo+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=27146): Process ended prematurely: osmo-stp_10.42.42.5(pid=27146) [trial-2379↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27146)]
Standard Output
---------------------------------------------- trial-2379 gprs:sysmo+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 16:16:00.300635 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:16:00.313022 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 16:16:00.469383 tst ping_idle_ping.py: using LAC 30015 16:16:00.597708 tst ping_idle_ping.py: using RAC 180 16:16:00.725769 tst ping_idle_ping.py: using CellId 30015 16:16:00.869444 tst ping_idle_ping.py: using BVCI 30016 16:16:00.895335 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:16:00.907504 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:16:00.919431 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:16:00.931578 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:16:00.943956 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:16:00.956206 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:16:00.969251 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:16:00.981583 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 16:16:01.285239 tst ping_idle_ping.py:24: start network... 16:16:01.424471 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:16:01.981865 run create_hlr_db(pid=27140): Launched 16:16:02.174941 bus /gobi_6: Setting Powered False 16:16:03.193392 run create_hlr_db(pid=27140): Terminated: ok {rc=0} 16:16:03.631836 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27142): Launched 16:16:03.966856 run osmo-hlr_10.42.42.2(pid=27143): Launched 16:16:04.090813 run osmo-stp_10.42.42.5: Starting osmo-stp 16:16:04.656418 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27145): Launched 16:16:04.963088 run osmo-stp_10.42.42.5(pid=27146): Launched 16:16:05.074626 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:16:05.610592 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27148): Launched 16:16:05.718951 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:16:05.988186 run patchelf(pid=27149): Launched 16:16:06.166922 run osmo-stp_10.42.42.5(pid=27146): ERR: Terminated: ERROR {rc=1} [trial-2379↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27146)] 16:16:06.297967 run osmo-stp_10.42.42.5(pid=27146): stdout: | (launched: 2022-12-12_16:16:04.811349) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:16:06.428826 run osmo-stp_10.42.42.5(pid=27146): stderr: | �[0;m�[38;5;43m20221212161604982 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212161604982 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212161604982 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212161604983 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212161604983 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212161604983 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212161604983 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:16:06.555296 run osmo-stp_10.42.42.5(pid=27146): stdout: | (launched: 2022-12-12_16:16:04.811349) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:16:06.680245 run osmo-stp_10.42.42.5(pid=27146): stderr: | �[0;m�[38;5;43m20221212161604982 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212161604982 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212161604982 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212161604983 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212161604983 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212161604983 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212161604983 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:16:06.825497 run patchelf(pid=27149): Terminating (SIGINT) 16:16:06.995871 run patchelf(pid=27149): Terminated: ok {rc=0} 16:16:07.027373 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=27146): Process ended prematurely: osmo-stp_10.42.42.5(pid=27146) [trial-2379↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27146)] [trial-2379↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 16:16:07.036300 tst ping_idle_ping.py:27: Test FAILED (6.7 sec) 16:16:07.096242 run osmo-hlr_10.42.42.2(pid=27143): ERR: Terminated: ERROR {rc=237} [trial-2379↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27143)] 16:16:07.145118 run osmo-hlr_10.42.42.2(pid=27143): stdout: | (launched: 2022-12-12_16:16:03.798100) 16:16:07.194674 run osmo-hlr_10.42.42.2(pid=27143): stderr: | �[0;m�[1;31m20221212161603993 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212161603993 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212161603993 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212161603993 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212161603993 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212161603993 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212161604005 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2379/run.2022-12-12_16-06-15/gprs:sysmo+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212161604019 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212161604019 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212161604019 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:16:07.236828 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27142): Terminating (SIGTERM) 16:16:07.276518 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27145): Terminating (SIGTERM) 16:16:07.316306 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27148): Terminating (SIGTERM) 16:16:07.325736 --- ParallelTerminationStrategy: PID 27142 died... 16:16:07.383608 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27142): Terminated: ok {rc=0} 16:16:07.395755 --- ParallelTerminationStrategy: PID 27145 died... 16:16:07.449505 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27145): Terminated: ok {rc=0} 16:16:07.459548 --- ParallelTerminationStrategy: PID 27148 died... 16:16:07.512072 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27148): Terminated: ok {rc=0} 16:16:07.600104 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27146): Process ended prematurely: osmo-stp_10.42.42.5(pid=27146) [trial-2379↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27146)]