Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=28312): Process ended prematurely: osmo-stp_10.42.42.5(pid=28312) [trial-2379↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28312)]
Standard Output
---------------------------------------------- trial-2379 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 16:28:45.617225 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 16:28:45.628431 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 16:28:45.777425 tst cs_paging_gprs_active.py: using LAC 30084 16:28:45.960672 tst cs_paging_gprs_active.py: using RAC 249 16:28:46.129630 tst cs_paging_gprs_active.py: using CellId 30084 16:28:46.292691 tst cs_paging_gprs_active.py: using BVCI 30085 16:28:46.325743 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 16:28:46.341113 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 16:28:46.355288 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 16:28:46.370097 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 16:28:46.384856 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 16:28:46.399534 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 16:28:46.414916 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 16:28:46.429185 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 16:28:46.442205 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 16:28:46.592394 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 16:28:46.899996 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:28:47.042930 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:28:47.401236 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28302): Launched 16:28:47.690945 run iperf3-srv_10.42.42.10(pid=28303): Launched 16:28:47.895127 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:28:48.034200 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:28:48.379612 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28304): Launched 16:28:48.667823 run iperf3-srv_10.42.42.10(pid=28305): Launched 16:28:48.871788 tst cs_paging_gprs_active.py:38: start network... 16:28:49.011089 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:28:49.538929 run create_hlr_db(pid=28306): Launched 16:28:49.731308 bus /sierra_2: Setting Powered False 16:28:50.751292 run create_hlr_db(pid=28306): Terminated: ok {rc=0} 16:28:51.171124 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28308): Launched 16:28:51.484519 run osmo-hlr_10.42.42.2(pid=28309): Launched 16:28:51.608491 run osmo-stp_10.42.42.5: Starting osmo-stp 16:28:52.153095 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28311): Launched 16:28:52.467879 run osmo-stp_10.42.42.5(pid=28312): Launched 16:28:52.581301 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:28:53.126310 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28314): Launched 16:28:53.236903 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:28:53.509706 run patchelf(pid=28315): Launched 16:28:53.692266 run osmo-stp_10.42.42.5(pid=28312): ERR: Terminated: ERROR {rc=1} [trial-2379↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28312)] 16:28:53.825678 run osmo-stp_10.42.42.5(pid=28312): stdout: | (launched: 2022-12-12_16:28:52.310803) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:28:53.959223 run osmo-stp_10.42.42.5(pid=28312): stderr: | �[0;m�[38;5;43m20221212162852484 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212162852484 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212162852484 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212162852484 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212162852485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212162852485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212162852485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:28:54.089104 run osmo-stp_10.42.42.5(pid=28312): stdout: | (launched: 2022-12-12_16:28:52.310803) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:28:54.217150 run osmo-stp_10.42.42.5(pid=28312): stderr: | �[0;m�[38;5;43m20221212162852484 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212162852484 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212162852484 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212162852484 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212162852485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212162852485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212162852485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:28:54.365554 run patchelf(pid=28315): Terminating (SIGINT) 16:28:54.540041 run patchelf(pid=28315): Terminated: ok {rc=0} 16:28:54.572291 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=28312): Process ended prematurely: osmo-stp_10.42.42.5(pid=28312) [trial-2379↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28312)] [trial-2379↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 16:28:54.581954 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 16:28:54.642101 run osmo-hlr_10.42.42.2(pid=28309): ERR: Terminated: ERROR {rc=237} [trial-2379↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28309)] 16:28:54.690949 run osmo-hlr_10.42.42.2(pid=28309): stdout: | (launched: 2022-12-12_16:28:51.329200) 16:28:54.740371 run osmo-hlr_10.42.42.2(pid=28309): stderr: | �[0;m�[1;31m20221212162851506 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212162851506 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212162851506 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212162851506 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212162851506 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212162851506 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212162851518 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2379/run.2022-12-12_16-06-15/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212162851527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212162851527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212162851527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:28:54.782489 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28302): Terminating (SIGTERM) 16:28:54.822274 run iperf3-srv_10.42.42.10(pid=28303): Terminating (SIGTERM) 16:28:54.862158 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28304): Terminating (SIGTERM) 16:28:54.901863 run iperf3-srv_10.42.42.10(pid=28305): Terminating (SIGTERM) 16:28:54.941640 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28308): Terminating (SIGTERM) 16:28:54.981505 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28311): Terminating (SIGTERM) 16:28:55.021529 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28314): Terminating (SIGTERM) 16:28:55.030796 --- ParallelTerminationStrategy: PID 28302 died... 16:28:55.084610 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28302): Terminated: ok {rc=0} 16:28:55.094532 --- ParallelTerminationStrategy: PID 28303 died... 16:28:55.148452 run iperf3-srv_10.42.42.10(pid=28303): Terminated {rc=256} 16:28:55.158007 --- ParallelTerminationStrategy: PID 28304 died... 16:28:55.210716 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28304): Terminated: ok {rc=0} 16:28:55.220043 --- ParallelTerminationStrategy: PID 28305 died... 16:28:55.272868 run iperf3-srv_10.42.42.10(pid=28305): Terminated {rc=256} 16:28:55.282434 --- ParallelTerminationStrategy: PID 28308 died... 16:28:55.335138 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28308): Terminated: ok {rc=0} 16:28:55.344569 --- ParallelTerminationStrategy: PID 28311 died... 16:28:55.397182 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28311): Terminated: ok {rc=0} 16:28:55.406626 --- ParallelTerminationStrategy: PID 28314 died... 16:28:55.459681 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28314): Terminated: ok {rc=0} 16:28:55.549842 bus /gobi_0: Setting Powered False 16:28:56.654496 bus /gobi_0: Setting Powered False 16:28:57.766805 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28312): Process ended prematurely: osmo-stp_10.42.42.5(pid=28312) [trial-2379↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28312)]