Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=30760): Process ended prematurely: osmo-stp_10.42.42.5(pid=30760) [trial-2379↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30760)]
Standard Output
---------------------------------------------- trial-2379 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 16:56:04.867648 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:56:04.879150 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 16:56:05.026108 tst cs_paging_gprs_active.py: using LAC 30227 16:56:05.156031 tst cs_paging_gprs_active.py: using RAC 137 16:56:05.288890 tst cs_paging_gprs_active.py: using CellId 30227 16:56:05.415140 tst cs_paging_gprs_active.py: using BVCI 30228 16:56:05.440285 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:56:05.451727 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:56:05.463028 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:56:05.474463 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:56:05.485749 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:56:05.496666 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:56:05.507976 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:56:05.518983 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:56:05.530427 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 16:56:05.646427 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 16:56:05.929361 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:56:06.057810 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:56:06.377976 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30750): Launched 16:56:06.646010 run iperf3-srv_10.42.42.10(pid=30751): Launched 16:56:06.833529 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:56:06.961596 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:56:07.281327 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30752): Launched 16:56:07.546868 run iperf3-srv_10.42.42.10(pid=30753): Launched 16:56:07.733526 tst cs_paging_gprs_active.py:38: start network... 16:56:07.861370 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:56:08.348681 run create_hlr_db(pid=30754): Launched 16:56:08.524690 bus /gobi_6: Setting Powered False 16:56:09.546798 run create_hlr_db(pid=30754): Terminated: ok {rc=0} 16:56:09.981080 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30756): Launched 16:56:10.312145 run osmo-hlr_10.42.42.2(pid=30757): Launched 16:56:10.434641 run osmo-stp_10.42.42.5: Starting osmo-stp 16:56:11.005634 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30759): Launched 16:56:11.334036 run osmo-stp_10.42.42.5(pid=30760): Launched 16:56:11.459025 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:56:12.030217 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30762): Launched 16:56:12.147485 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:56:12.435694 run patchelf(pid=30763): Launched 16:56:12.628578 run osmo-stp_10.42.42.5(pid=30760): ERR: Terminated: ERROR {rc=1} [trial-2379↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30760)] 16:56:12.767977 run osmo-stp_10.42.42.5(pid=30760): stdout: | (launched: 2022-12-12_16:56:11.171947) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:56:12.907839 run osmo-stp_10.42.42.5(pid=30760): stderr: | �[0;m�[38;5;43m20221212165611363 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212165611364 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212165611364 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212165611364 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212165611365 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212165611365 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212165611365 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:56:13.043272 run osmo-stp_10.42.42.5(pid=30760): stdout: | (launched: 2022-12-12_16:56:11.171947) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:56:13.177698 run osmo-stp_10.42.42.5(pid=30760): stderr: | �[0;m�[38;5;43m20221212165611363 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212165611364 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212165611364 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212165611364 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212165611365 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212165611365 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212165611365 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:56:13.334477 run patchelf(pid=30763): Terminating (SIGINT) 16:56:13.517884 run patchelf(pid=30763): Terminated: ok {rc=0} 16:56:13.551589 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=30760): Process ended prematurely: osmo-stp_10.42.42.5(pid=30760) [trial-2379↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30760)] [trial-2379↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 16:56:13.561584 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 16:56:13.624744 run osmo-hlr_10.42.42.2(pid=30757): ERR: Terminated: ERROR {rc=237} [trial-2379↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30757)] 16:56:13.676468 run osmo-hlr_10.42.42.2(pid=30757): stdout: | (launched: 2022-12-12_16:56:10.148850) 16:56:13.728842 run osmo-hlr_10.42.42.2(pid=30757): stderr: | �[0;m�[1;31m20221212165610350 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212165610350 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212165610350 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212165610350 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212165610351 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212165610351 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212165610363 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2379/run.2022-12-12_16-06-15/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212165610371 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212165610372 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212165610372 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:56:13.773417 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30750): Terminating (SIGTERM) 16:56:13.815223 run iperf3-srv_10.42.42.10(pid=30751): Terminating (SIGTERM) 16:56:13.857137 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30752): Terminating (SIGTERM) 16:56:13.899627 run iperf3-srv_10.42.42.10(pid=30753): Terminating (SIGTERM) 16:56:13.941622 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30756): Terminating (SIGTERM) 16:56:13.983472 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30759): Terminating (SIGTERM) 16:56:14.025461 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30762): Terminating (SIGTERM) 16:56:14.035230 --- ParallelTerminationStrategy: PID 30750 died... 16:56:14.091189 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30750): Terminated: ok {rc=0} 16:56:14.101332 --- ParallelTerminationStrategy: PID 30751 died... 16:56:14.157256 run iperf3-srv_10.42.42.10(pid=30751): Terminated {rc=256} 16:56:14.167304 --- ParallelTerminationStrategy: PID 30752 died... 16:56:14.223521 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30752): Terminated: ok {rc=0} 16:56:14.233682 --- ParallelTerminationStrategy: PID 30753 died... 16:56:14.289184 run iperf3-srv_10.42.42.10(pid=30753): Terminated {rc=256} 16:56:14.299188 --- ParallelTerminationStrategy: PID 30756 died... 16:56:14.355121 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30756): Terminated: ok {rc=0} 16:56:14.365357 --- ParallelTerminationStrategy: PID 30759 died... 16:56:14.421021 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30759): Terminated: ok {rc=0} 16:56:14.431164 --- ParallelTerminationStrategy: PID 30762 died... 16:56:14.487237 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30762): Terminated: ok {rc=0} 16:56:14.574908 bus /gobi_0: Setting Powered False 16:56:15.682004 bus /gobi_0: Setting Powered False 16:56:16.790012 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30760): Process ended prematurely: osmo-stp_10.42.42.5(pid=30760) [trial-2379↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30760)]