Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=29277): Process ended prematurely: osmo-stp_10.42.42.5(pid=29277) [trial-2379↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29277)]
Standard Output
---------------------------------------------- trial-2379 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 16:38:46.687093 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:38:46.702394 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 16:38:46.894446 tst cs_paging_gprs_active.py: using LAC 30136 16:38:47.069351 tst cs_paging_gprs_active.py: using RAC 46 16:38:47.240584 tst cs_paging_gprs_active.py: using CellId 30136 16:38:47.403514 tst cs_paging_gprs_active.py: using BVCI 30137 16:38:47.437875 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:38:47.450742 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:38:47.464189 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:38:47.478990 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:38:47.493645 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:38:47.510734 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:38:47.528931 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:38:47.542934 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:38:47.556919 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 16:38:47.697761 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 16:38:48.061111 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:38:48.243754 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:38:48.707507 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29163): Launched 16:38:49.044742 run iperf3-srv_10.42.42.10(pid=29204): Launched 16:38:49.282991 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:38:49.441642 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:38:49.823877 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29266): Launched 16:38:50.130654 run iperf3-srv_10.42.42.10(pid=29268): Launched 16:38:50.343212 tst cs_paging_gprs_active.py:38: start network... 16:38:50.488446 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:38:51.063755 run create_hlr_db(pid=29269): Launched 16:38:51.262883 bus /gobi_6: Setting Powered False 16:38:52.285062 run create_hlr_db(pid=29269): Terminated: ok {rc=0} 16:38:52.739388 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29273): Launched 16:38:53.158070 run osmo-hlr_10.42.42.2(pid=29274): Launched 16:38:53.383413 run osmo-stp_10.42.42.5: Starting osmo-stp 16:38:54.006364 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29276): Launched 16:38:54.412680 run osmo-stp_10.42.42.5(pid=29277): Launched 16:38:54.655315 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:38:55.262282 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29279): Launched 16:38:55.377539 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:38:55.670892 run patchelf(pid=29280): Launched 16:38:55.857754 run osmo-stp_10.42.42.5(pid=29277): ERR: Terminated: ERROR {rc=1} [trial-2379↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29277)] 16:38:55.994676 run osmo-stp_10.42.42.5(pid=29277): stdout: | (launched: 2022-12-12_16:38:54.165583) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:38:56.133689 run osmo-stp_10.42.42.5(pid=29277): stderr: | �[0;m�[38;5;43m20221212163854487 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212163854487 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212163854487 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212163854488 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212163854488 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212163854488 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212163854488 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:38:56.266270 run osmo-stp_10.42.42.5(pid=29277): stdout: | (launched: 2022-12-12_16:38:54.165583) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:38:56.398009 run osmo-stp_10.42.42.5(pid=29277): stderr: | �[0;m�[38;5;43m20221212163854487 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212163854487 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212163854487 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212163854488 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212163854488 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212163854488 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212163854488 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:38:56.549717 run patchelf(pid=29280): Terminating (SIGINT) 16:38:56.728397 run patchelf(pid=29280): Terminated: ok {rc=0} 16:38:56.762489 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=29277): Process ended prematurely: osmo-stp_10.42.42.5(pid=29277) [trial-2379↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29277)] [trial-2379↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 16:38:56.773175 tst cs_paging_gprs_active.py:38: Test FAILED (10.2 sec) 16:38:56.836272 run osmo-hlr_10.42.42.2(pid=29274): ERR: Terminated: ERROR {rc=237} [trial-2379↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29274)] 16:38:56.887269 run osmo-hlr_10.42.42.2(pid=29274): stdout: | (launched: 2022-12-12_16:38:52.899266) 16:38:56.939279 run osmo-hlr_10.42.42.2(pid=29274): stderr: | �[0;m�[1;31m20221212163853234 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212163853234 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212163853234 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212163853234 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212163853234 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212163853234 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212163853251 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2379/run.2022-12-12_16-06-15/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212163853268 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212163853268 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212163853268 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:38:56.983430 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29163): Terminating (SIGTERM) 16:38:57.027807 run iperf3-srv_10.42.42.10(pid=29204): Terminating (SIGTERM) 16:38:57.071154 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29266): Terminating (SIGTERM) 16:38:57.114733 run iperf3-srv_10.42.42.10(pid=29268): Terminating (SIGTERM) 16:38:57.158336 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29273): Terminating (SIGTERM) 16:38:57.202354 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29276): Terminating (SIGTERM) 16:38:57.244803 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29279): Terminating (SIGTERM) 16:38:57.256079 --- ParallelTerminationStrategy: PID 29163 died... 16:38:57.313309 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29163): Terminated: ok {rc=0} 16:38:57.323531 --- ParallelTerminationStrategy: PID 29204 died... 16:38:57.379298 run iperf3-srv_10.42.42.10(pid=29204): Terminated {rc=256} 16:38:57.389971 --- ParallelTerminationStrategy: PID 29266 died... 16:38:57.445526 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29266): Terminated: ok {rc=0} 16:38:57.456257 --- ParallelTerminationStrategy: PID 29268 died... 16:38:57.511839 run iperf3-srv_10.42.42.10(pid=29268): Terminated {rc=256} 16:38:57.523593 --- ParallelTerminationStrategy: PID 29273 died... 16:38:57.579340 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29273): Terminated: ok {rc=0} 16:38:57.590281 --- ParallelTerminationStrategy: PID 29276 died... 16:38:57.645962 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29276): Terminated: ok {rc=0} 16:38:57.656585 --- ParallelTerminationStrategy: PID 29279 died... 16:38:57.712737 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29279): Terminated: ok {rc=0} 16:38:57.799777 bus /gobi_0: Setting Powered False 16:38:58.909021 bus /gobi_0: Setting Powered False 16:39:00.021039 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29277): Process ended prematurely: osmo-stp_10.42.42.5(pid=29277) [trial-2379↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29277)]