Failed
dynts:trx-lms+mod-bts0-dynts67-osmo.switch_tch_pdch.py (from dynts_trx-lms+mod-bts0-dynts67-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=13416): Process ended prematurely: osmo-stp_10.42.42.5(pid=13416) [trial-2380↪dynts:trx-lms+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13416)]
Standard Output
---------------------------------------------- trial-2380 dynts:trx-lms+mod-bts0-dynts67-osmo switch_tch_pdch.py ---------------------------------------------- 18:34:13.423542 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 18:34:13.434914 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1) 18:34:13.594653 tst switch_tch_pdch.py: using LAC 30704 18:34:13.719664 tst switch_tch_pdch.py: using RAC 104 18:34:13.842491 tst switch_tch_pdch.py: using CellId 30704 18:34:13.964813 tst switch_tch_pdch.py: using BVCI 30705 18:34:13.989343 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 18:34:14.000698 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 18:34:14.011886 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 18:34:14.023139 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 18:34:14.034354 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 18:34:14.045559 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 18:34:14.056821 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 18:34:14.067920 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 18:34:14.190743 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 18:34:14.480772 tst switch_tch_pdch.py:51: start network... 18:34:14.613655 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:34:15.096015 run create_hlr_db(pid=13410): Launched 18:34:15.226544 bus /gobi_6: Setting Powered False 18:34:16.323078 run create_hlr_db(pid=13410): Terminated: ok {rc=0} 18:34:16.767693 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13412): Launched 18:34:17.145237 run osmo-hlr_10.42.42.2(pid=13413): Launched 18:34:17.337821 run osmo-stp_10.42.42.5: Starting osmo-stp 18:34:17.836224 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13415): Launched 18:34:18.136138 run osmo-stp_10.42.42.5(pid=13416): Launched 18:34:18.244863 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:34:18.739099 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13418): Launched 18:34:18.845079 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:34:19.107701 run patchelf(pid=13419): Launched 18:34:19.282401 run osmo-stp_10.42.42.5(pid=13416): ERR: Terminated: ERROR {rc=1} [trial-2380↪dynts:trx-lms+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13416)] 18:34:19.410069 run osmo-stp_10.42.42.5(pid=13416): stdout: | (launched: 2022-12-12_18:34:17.987579) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:34:19.537433 run osmo-stp_10.42.42.5(pid=13416): stderr: | �[0;m�[38;5;43m20221212183418155 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212183418155 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212183418156 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212183418156 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212183418157 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212183418157 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212183418157 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:34:19.660580 run osmo-stp_10.42.42.5(pid=13416): stdout: | (launched: 2022-12-12_18:34:17.987579) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:34:19.782764 run osmo-stp_10.42.42.5(pid=13416): stderr: | �[0;m�[38;5;43m20221212183418155 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212183418155 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212183418156 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212183418156 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212183418157 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212183418157 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212183418157 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:34:19.926171 run patchelf(pid=13419): Terminating (SIGINT) 18:34:20.093706 run patchelf(pid=13419): Terminated: ok {rc=0} 18:34:20.124493 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=13416): Process ended prematurely: osmo-stp_10.42.42.5(pid=13416) [trial-2380↪dynts:trx-lms+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13416)] [trial-2380↪dynts:trx-lms+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54] 18:34:20.133213 tst switch_tch_pdch.py:54: Test FAILED (6.7 sec) 18:34:20.193433 run osmo-hlr_10.42.42.2(pid=13413): ERR: Terminated: ERROR {rc=237} [trial-2380↪dynts:trx-lms+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13413)] 18:34:20.242209 run osmo-hlr_10.42.42.2(pid=13413): stdout: | (launched: 2022-12-12_18:34:16.927466) 18:34:20.291739 run osmo-hlr_10.42.42.2(pid=13413): stderr: | �[0;m�[1;31m20221212183417258 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212183417258 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212183417258 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212183417258 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212183417258 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212183417259 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212183417276 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2380/run.2022-12-12_17-41-28/dynts:trx-lms+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212183417291 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212183417291 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212183417291 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:34:20.334100 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13412): Terminating (SIGTERM) 18:34:20.373610 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13415): Terminating (SIGTERM) 18:34:20.413126 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13418): Terminating (SIGTERM) 18:34:20.422654 --- ParallelTerminationStrategy: PID 13412 died... 18:34:20.476095 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13412): Terminated: ok {rc=0} 18:34:20.485979 --- ParallelTerminationStrategy: PID 13415 died... 18:34:20.539707 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13415): Terminated: ok {rc=0} 18:34:20.549641 --- ParallelTerminationStrategy: PID 13418 died... 18:34:20.603094 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13418): Terminated: ok {rc=0} 18:34:20.691695 bus /gobi_0: Setting Powered False 18:34:21.795398 bus /gobi_0: Setting Powered False 18:34:22.907359 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13416): Process ended prematurely: osmo-stp_10.42.42.5(pid=13416) [trial-2380↪dynts:trx-lms+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13416)]