Failed
gprs:nanobts+band-900.cs_paging_gprs_active.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=15424): Process ended prematurely: osmo-stp_10.42.42.5(pid=15424) [trial-2380↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15424)]
Standard Output
---------------------------------------------- trial-2380 gprs:nanobts+band-900 cs_paging_gprs_active.py ---------------------------------------------- 18:51:22.947374 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:51:22.959198 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 18:51:23.099417 tst cs_paging_gprs_active.py: using LAC 30796 18:51:23.220020 tst cs_paging_gprs_active.py: using RAC 196 18:51:23.340389 tst cs_paging_gprs_active.py: using CellId 30796 18:51:23.461909 tst cs_paging_gprs_active.py: using BVCI 30797 18:51:23.485708 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:51:23.496620 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:51:23.507426 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:51:23.518534 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:51:23.529732 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:51:23.540937 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:51:23.552072 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:51:23.563096 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:51:23.574317 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 18:51:23.691462 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 18:51:23.993071 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 18:51:24.130130 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:51:24.470541 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15414): Launched 18:51:24.756531 run iperf3-srv_10.42.42.10(pid=15415): Launched 18:51:24.957082 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 18:51:25.094343 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:51:25.434982 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15416): Launched 18:51:25.718919 run iperf3-srv_10.42.42.10(pid=15417): Launched 18:51:25.919215 tst cs_paging_gprs_active.py:38: start network... 18:51:26.055900 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:51:26.582693 run create_hlr_db(pid=15418): Launched 18:51:26.771710 bus /sierra_2: Setting Powered False 18:51:27.784031 run create_hlr_db(pid=15418): Terminated: ok {rc=0} 18:51:28.198924 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15420): Launched 18:51:28.508278 run osmo-hlr_10.42.42.2(pid=15421): Launched 18:51:28.626177 run osmo-stp_10.42.42.5: Starting osmo-stp 18:51:29.166270 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15423): Launched 18:51:29.475949 run osmo-stp_10.42.42.5(pid=15424): Launched 18:51:29.587920 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:51:30.120783 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15426): Launched 18:51:30.230186 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:51:30.500388 run patchelf(pid=15427): Launched 18:51:30.679503 run osmo-stp_10.42.42.5(pid=15424): ERR: Terminated: ERROR {rc=1} [trial-2380↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15424)] 18:51:30.810352 run osmo-stp_10.42.42.5(pid=15424): stdout: | (launched: 2022-12-12_18:51:29.321946) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:51:30.960302 run osmo-stp_10.42.42.5(pid=15424): stderr: | �[0;m�[38;5;43m20221212185129491 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212185129491 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212185129491 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212185129492 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212185129492 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212185129492 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212185129492 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:51:31.099252 run osmo-stp_10.42.42.5(pid=15424): stdout: | (launched: 2022-12-12_18:51:29.321946) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:51:31.236829 run osmo-stp_10.42.42.5(pid=15424): stderr: | �[0;m�[38;5;43m20221212185129491 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212185129491 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212185129491 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212185129492 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212185129492 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212185129492 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212185129492 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:51:31.396417 run patchelf(pid=15427): Terminating (SIGINT) 18:51:31.585070 run patchelf(pid=15427): Terminated: ok {rc=0} 18:51:31.621414 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=15424): Process ended prematurely: osmo-stp_10.42.42.5(pid=15424) [trial-2380↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15424)] [trial-2380↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38] 18:51:31.632736 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 18:51:31.697488 run osmo-hlr_10.42.42.2(pid=15421): ERR: Terminated: ERROR {rc=237} [trial-2380↪gprs:nanobts+band-900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15421)] 18:51:31.750635 run osmo-hlr_10.42.42.2(pid=15421): stdout: | (launched: 2022-12-12_18:51:28.354266) 18:51:31.803620 run osmo-hlr_10.42.42.2(pid=15421): stderr: | �[0;m�[1;31m20221212185128529 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212185128529 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212185128529 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212185128529 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212185128529 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212185128529 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212185128550 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2380/run.2022-12-12_17-41-28/gprs:nanobts+band-900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212185128560 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212185128560 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212185128560 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:51:31.849859 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15414): Terminating (SIGTERM) 18:51:31.895644 run iperf3-srv_10.42.42.10(pid=15415): Terminating (SIGTERM) 18:51:31.938422 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15416): Terminating (SIGTERM) 18:51:31.980734 run iperf3-srv_10.42.42.10(pid=15417): Terminating (SIGTERM) 18:51:32.024504 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15420): Terminating (SIGTERM) 18:51:32.069490 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15423): Terminating (SIGTERM) 18:51:32.112860 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15426): Terminating (SIGTERM) 18:51:32.124188 --- ParallelTerminationStrategy: PID 15414 died... 18:51:32.183196 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15414): Terminated: ok {rc=0} 18:51:32.193489 --- ParallelTerminationStrategy: PID 15415 died... 18:51:32.250047 run iperf3-srv_10.42.42.10(pid=15415): Terminated {rc=256} 18:51:32.260110 --- ParallelTerminationStrategy: PID 15416 died... 18:51:32.315954 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15416): Terminated: ok {rc=0} 18:51:32.326048 --- ParallelTerminationStrategy: PID 15417 died... 18:51:32.381716 run iperf3-srv_10.42.42.10(pid=15417): Terminated {rc=256} 18:51:32.391834 --- ParallelTerminationStrategy: PID 15420 died... 18:51:32.448060 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15420): Terminated: ok {rc=0} 18:51:32.458211 --- ParallelTerminationStrategy: PID 15423 died... 18:51:32.514240 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15423): Terminated: ok {rc=0} 18:51:32.524449 --- ParallelTerminationStrategy: PID 15426 died... 18:51:32.580740 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15426): Terminated: ok {rc=0} 18:51:32.669187 bus /gobi_0: Setting Powered False 18:51:33.773201 bus /gobi_0: Setting Powered False 18:51:34.880455 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15424): Process ended prematurely: osmo-stp_10.42.42.5(pid=15424) [trial-2380↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15424)]