Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=9747): Process ended prematurely: osmo-stp_10.42.42.5(pid=9747) [trial-2380↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9747)]
Standard Output
---------------------------------------------- trial-2380 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 17:57:17.956529 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:57:17.967987 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 17:57:18.120328 tst cs_paging_gprs_active.py: using LAC 30509 17:57:18.249640 tst cs_paging_gprs_active.py: using RAC 164 17:57:18.378892 tst cs_paging_gprs_active.py: using CellId 30509 17:57:18.508289 tst cs_paging_gprs_active.py: using BVCI 30510 17:57:18.533467 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:57:18.544739 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:57:18.555809 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:57:18.567029 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:57:18.578076 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:57:18.589218 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:57:18.600382 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:57:18.611599 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:57:18.623114 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 17:57:18.740347 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 17:57:19.041475 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 17:57:19.178735 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:57:19.520643 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9737): Launched 17:57:19.805705 run iperf3-srv_10.42.42.10(pid=9738): Launched 17:57:20.007118 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 17:57:20.144917 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:57:20.485178 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9739): Launched 17:57:20.769223 run iperf3-srv_10.42.42.10(pid=9740): Launched 17:57:20.970228 tst cs_paging_gprs_active.py:38: start network... 17:57:21.107645 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:57:21.634295 run create_hlr_db(pid=9741): Launched 17:57:21.823014 bus /gobi_6: Setting Powered False 17:57:22.845084 run create_hlr_db(pid=9741): Terminated: ok {rc=0} 17:57:23.282841 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9743): Launched 17:57:23.613905 run osmo-hlr_10.42.42.2(pid=9744): Launched 17:57:23.733083 run osmo-stp_10.42.42.5: Starting osmo-stp 17:57:24.303102 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9746): Launched 17:57:24.633219 run osmo-stp_10.42.42.5(pid=9747): Launched 17:57:24.751287 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:57:25.323891 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9749): Launched 17:57:25.441092 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:57:25.728274 run patchelf(pid=9750): Launched 17:57:25.919523 run osmo-stp_10.42.42.5(pid=9747): ERR: Terminated: ERROR {rc=1} [trial-2380↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9747)] 17:57:26.059964 run osmo-stp_10.42.42.5(pid=9747): stdout: | (launched: 2022-12-12_17:57:24.470085) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:57:26.199901 run osmo-stp_10.42.42.5(pid=9747): stderr: | �[0;m�[38;5;43m20221212175724660 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212175724660 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212175724660 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212175724661 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212175724661 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212175724661 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212175724661 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:57:26.335394 run osmo-stp_10.42.42.5(pid=9747): stdout: | (launched: 2022-12-12_17:57:24.470085) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:57:26.469472 run osmo-stp_10.42.42.5(pid=9747): stderr: | �[0;m�[38;5;43m20221212175724660 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212175724660 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212175724660 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212175724661 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212175724661 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212175724661 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212175724661 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:57:26.625776 run patchelf(pid=9750): Terminating (SIGINT) 17:57:26.808573 run patchelf(pid=9750): Terminated: ok {rc=0} 17:57:26.842310 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=9747): Process ended prematurely: osmo-stp_10.42.42.5(pid=9747) [trial-2380↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9747)] [trial-2380↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 17:57:26.852181 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 17:57:26.914882 run osmo-hlr_10.42.42.2(pid=9744): ERR: Terminated: ERROR {rc=237} [trial-2380↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9744)] 17:57:26.965840 run osmo-hlr_10.42.42.2(pid=9744): stdout: | (launched: 2022-12-12_17:57:23.450136) 17:57:27.018047 run osmo-hlr_10.42.42.2(pid=9744): stderr: | �[0;m�[1;31m20221212175723649 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212175723649 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212175723649 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212175723649 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212175723649 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212175723649 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212175723661 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2380/run.2022-12-12_17-41-28/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212175723671 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212175723671 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212175723671 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:57:27.062483 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9737): Terminating (SIGTERM) 17:57:27.104430 run iperf3-srv_10.42.42.10(pid=9738): Terminating (SIGTERM) 17:57:27.146375 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9739): Terminating (SIGTERM) 17:57:27.188129 run iperf3-srv_10.42.42.10(pid=9740): Terminating (SIGTERM) 17:57:27.230152 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9743): Terminating (SIGTERM) 17:57:27.272081 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9746): Terminating (SIGTERM) 17:57:27.314761 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9749): Terminating (SIGTERM) 17:57:27.324482 --- ParallelTerminationStrategy: PID 9737 died... 17:57:27.380342 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9737): Terminated: ok {rc=0} 17:57:27.390389 --- ParallelTerminationStrategy: PID 9738 died... 17:57:27.446094 run iperf3-srv_10.42.42.10(pid=9738): Terminated {rc=256} 17:57:27.455880 --- ParallelTerminationStrategy: PID 9739 died... 17:57:27.511305 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9739): Terminated: ok {rc=0} 17:57:27.521398 --- ParallelTerminationStrategy: PID 9740 died... 17:57:27.576488 run iperf3-srv_10.42.42.10(pid=9740): Terminated {rc=256} 17:57:27.586500 --- ParallelTerminationStrategy: PID 9743 died... 17:57:27.642139 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9743): Terminated: ok {rc=0} 17:57:27.652021 --- ParallelTerminationStrategy: PID 9746 died... 17:57:27.707741 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9746): Terminated: ok {rc=0} 17:57:27.717896 --- ParallelTerminationStrategy: PID 9749 died... 17:57:27.773311 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9749): Terminated: ok {rc=0} 17:57:27.860073 bus /gobi_0: Setting Powered False 17:57:28.966597 bus /gobi_0: Setting Powered False 17:57:30.075971 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9747): Process ended prematurely: osmo-stp_10.42.42.5(pid=9747) [trial-2380↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9747)]