Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=9817): Process ended prematurely: osmo-stp_10.42.42.5(pid=9817) [trial-2380↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9817)]
Standard Output
---------------------------------------------- trial-2380 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 17:58:18.402557 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:58:18.413838 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 17:58:18.567589 tst cs_paging_gprs_active.py: using LAC 30514 17:58:18.697466 tst cs_paging_gprs_active.py: using RAC 169 17:58:18.827196 tst cs_paging_gprs_active.py: using CellId 30514 17:58:18.957144 tst cs_paging_gprs_active.py: using BVCI 30515 17:58:18.982480 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:58:18.993774 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:58:19.004845 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:58:19.016472 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:58:19.028173 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:58:19.039860 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:58:19.051964 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:58:19.063554 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:58:19.075346 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 17:58:19.195046 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 17:58:19.480398 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 17:58:19.608846 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:58:19.929804 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9807): Launched 17:58:20.197360 run iperf3-srv_10.42.42.10(pid=9808): Launched 17:58:20.384854 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 17:58:20.513112 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:58:20.834225 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9809): Launched 17:58:21.101352 run iperf3-srv_10.42.42.10(pid=9810): Launched 17:58:21.288453 tst cs_paging_gprs_active.py:38: start network... 17:58:21.416254 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:58:21.904768 run create_hlr_db(pid=9811): Launched 17:58:22.081306 bus /gobi_6: Setting Powered False 17:58:23.104152 run create_hlr_db(pid=9811): Terminated: ok {rc=0} 17:58:23.544092 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9813): Launched 17:58:23.878039 run osmo-hlr_10.42.42.2(pid=9814): Launched 17:58:23.998659 run osmo-stp_10.42.42.5: Starting osmo-stp 17:58:24.572582 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9816): Launched 17:58:24.906238 run osmo-stp_10.42.42.5(pid=9817): Launched 17:58:25.025868 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:58:25.601821 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9819): Launched 17:58:25.719379 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:58:26.007778 run patchelf(pid=9820): Launched 17:58:26.199364 run osmo-stp_10.42.42.5(pid=9817): ERR: Terminated: ERROR {rc=1} [trial-2380↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9817)] 17:58:26.339838 run osmo-stp_10.42.42.5(pid=9817): stdout: | (launched: 2022-12-12_17:58:24.741359) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:58:26.480099 run osmo-stp_10.42.42.5(pid=9817): stderr: | �[0;m�[38;5;43m20221212175824932 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212175824932 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212175824933 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212175824933 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212175824933 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212175824934 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212175824934 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:58:26.616156 run osmo-stp_10.42.42.5(pid=9817): stdout: | (launched: 2022-12-12_17:58:24.741359) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:58:26.750722 run osmo-stp_10.42.42.5(pid=9817): stderr: | �[0;m�[38;5;43m20221212175824932 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212175824932 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212175824933 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212175824933 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212175824933 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212175824934 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212175824934 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:58:26.907390 run patchelf(pid=9820): Terminating (SIGINT) 17:58:27.091189 run patchelf(pid=9820): Terminated: ok {rc=0} 17:58:27.124820 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=9817): Process ended prematurely: osmo-stp_10.42.42.5(pid=9817) [trial-2380↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9817)] [trial-2380↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 17:58:27.134829 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 17:58:27.197484 run osmo-hlr_10.42.42.2(pid=9814): ERR: Terminated: ERROR {rc=237} [trial-2380↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9814)] 17:58:27.248777 run osmo-hlr_10.42.42.2(pid=9814): stdout: | (launched: 2022-12-12_17:58:23.711587) 17:58:27.300773 run osmo-hlr_10.42.42.2(pid=9814): stderr: | �[0;m�[1;31m20221212175823911 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212175823911 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212175823911 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212175823911 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212175823911 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212175823911 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212175823923 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2380/run.2022-12-12_17-41-28/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212175823932 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212175823933 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212175823933 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:58:27.345101 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9807): Terminating (SIGTERM) 17:58:27.386825 run iperf3-srv_10.42.42.10(pid=9808): Terminating (SIGTERM) 17:58:27.428504 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9809): Terminating (SIGTERM) 17:58:27.470150 run iperf3-srv_10.42.42.10(pid=9810): Terminating (SIGTERM) 17:58:27.511937 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9813): Terminating (SIGTERM) 17:58:27.553518 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9816): Terminating (SIGTERM) 17:58:27.594961 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9819): Terminating (SIGTERM) 17:58:27.604538 --- ParallelTerminationStrategy: PID 9807 died... 17:58:27.660137 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9807): Terminated: ok {rc=0} 17:58:27.670126 --- ParallelTerminationStrategy: PID 9808 died... 17:58:27.725254 run iperf3-srv_10.42.42.10(pid=9808): Terminated {rc=256} 17:58:27.735054 --- ParallelTerminationStrategy: PID 9809 died... 17:58:27.791041 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9809): Terminated: ok {rc=0} 17:58:27.801086 --- ParallelTerminationStrategy: PID 9810 died... 17:58:27.856992 run iperf3-srv_10.42.42.10(pid=9810): Terminated {rc=256} 17:58:27.866948 --- ParallelTerminationStrategy: PID 9813 died... 17:58:27.922466 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9813): Terminated: ok {rc=0} 17:58:27.932455 --- ParallelTerminationStrategy: PID 9816 died... 17:58:27.987994 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9816): Terminated: ok {rc=0} 17:58:27.997959 --- ParallelTerminationStrategy: PID 9819 died... 17:58:28.053650 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9819): Terminated: ok {rc=0} 17:58:28.141353 bus /gobi_0: Setting Powered False 17:58:29.248581 bus /gobi_0: Setting Powered False 17:58:30.359570 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9817): Process ended prematurely: osmo-stp_10.42.42.5(pid=9817) [trial-2380↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9817)]