Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=9680): Process ended prematurely: osmo-stp_10.42.42.5(pid=9680) [trial-2380↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9680)]
Standard Output
---------------------------------------------- trial-2380 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 17:56:17.225223 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:56:17.236942 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 17:56:17.370706 tst cs_paging_gprs_active.py: using LAC 30504 17:56:17.498715 tst cs_paging_gprs_active.py: using RAC 159 17:56:17.626363 tst cs_paging_gprs_active.py: using CellId 30504 17:56:17.755679 tst cs_paging_gprs_active.py: using BVCI 30505 17:56:17.780713 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:56:17.792104 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:56:17.803352 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:56:17.815159 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:56:17.826788 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:56:17.838538 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:56:17.850346 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:56:17.861877 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:56:17.873666 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 17:56:17.993452 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 17:56:18.287465 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 17:56:18.423562 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:56:18.762605 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9670): Launched 17:56:19.046430 run iperf3-srv_10.42.42.10(pid=9671): Launched 17:56:19.246368 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 17:56:19.382395 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:56:19.720937 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9672): Launched 17:56:20.003530 run iperf3-srv_10.42.42.10(pid=9673): Launched 17:56:20.202465 tst cs_paging_gprs_active.py:38: start network... 17:56:20.338399 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:56:20.864299 run create_hlr_db(pid=9674): Launched 17:56:21.053826 bus /gobi_6: Setting Powered False 17:56:22.074968 run create_hlr_db(pid=9674): Terminated: ok {rc=0} 17:56:22.511022 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9676): Launched 17:56:22.839997 run osmo-hlr_10.42.42.2(pid=9677): Launched 17:56:22.958527 run osmo-stp_10.42.42.5: Starting osmo-stp 17:56:23.527291 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9679): Launched 17:56:23.855826 run osmo-stp_10.42.42.5(pid=9680): Launched 17:56:23.974233 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:56:24.546010 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9682): Launched 17:56:24.662148 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:56:24.949376 run patchelf(pid=9683): Launched 17:56:25.139250 run osmo-stp_10.42.42.5(pid=9680): ERR: Terminated: ERROR {rc=1} [trial-2380↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9680)] 17:56:25.277894 run osmo-stp_10.42.42.5(pid=9680): stdout: | (launched: 2022-12-12_17:56:23.693431) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:56:25.416841 run osmo-stp_10.42.42.5(pid=9680): stderr: | �[0;m�[38;5;43m20221212175623886 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212175623886 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212175623886 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212175623887 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212175623887 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212175623887 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212175623887 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:56:25.551031 run osmo-stp_10.42.42.5(pid=9680): stdout: | (launched: 2022-12-12_17:56:23.693431) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:56:25.684218 run osmo-stp_10.42.42.5(pid=9680): stderr: | �[0;m�[38;5;43m20221212175623886 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212175623886 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212175623886 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212175623887 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212175623887 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212175623887 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212175623887 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:56:25.839426 run patchelf(pid=9683): Terminating (SIGINT) 17:56:26.021794 run patchelf(pid=9683): Terminated: ok {rc=0} 17:56:26.055465 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=9680): Process ended prematurely: osmo-stp_10.42.42.5(pid=9680) [trial-2380↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9680)] [trial-2380↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 17:56:26.065455 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 17:56:26.128004 run osmo-hlr_10.42.42.2(pid=9677): ERR: Terminated: ERROR {rc=237} [trial-2380↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9677)] 17:56:26.179217 run osmo-hlr_10.42.42.2(pid=9677): stdout: | (launched: 2022-12-12_17:56:22.677376) 17:56:26.230950 run osmo-hlr_10.42.42.2(pid=9677): stderr: | �[0;m�[1;31m20221212175622878 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212175622878 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212175622878 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212175622878 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212175622878 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212175622878 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212175622891 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2380/run.2022-12-12_17-41-28/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212175622899 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212175622900 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212175622900 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:56:26.275288 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9670): Terminating (SIGTERM) 17:56:26.317023 run iperf3-srv_10.42.42.10(pid=9671): Terminating (SIGTERM) 17:56:26.358672 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9672): Terminating (SIGTERM) 17:56:26.400511 run iperf3-srv_10.42.42.10(pid=9673): Terminating (SIGTERM) 17:56:26.442545 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9676): Terminating (SIGTERM) 17:56:26.484308 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9679): Terminating (SIGTERM) 17:56:26.526176 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9682): Terminating (SIGTERM) 17:56:26.535859 --- ParallelTerminationStrategy: PID 9670 died... 17:56:26.591537 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9670): Terminated: ok {rc=0} 17:56:26.601639 --- ParallelTerminationStrategy: PID 9671 died... 17:56:26.656507 run iperf3-srv_10.42.42.10(pid=9671): Terminated {rc=256} 17:56:26.666480 --- ParallelTerminationStrategy: PID 9672 died... 17:56:26.721665 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9672): Terminated: ok {rc=0} 17:56:26.731541 --- ParallelTerminationStrategy: PID 9673 died... 17:56:26.786681 run iperf3-srv_10.42.42.10(pid=9673): Terminated {rc=256} 17:56:26.796892 --- ParallelTerminationStrategy: PID 9676 died... 17:56:26.852442 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9676): Terminated: ok {rc=0} 17:56:26.862396 --- ParallelTerminationStrategy: PID 9679 died... 17:56:26.918005 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9679): Terminated: ok {rc=0} 17:56:26.928095 --- ParallelTerminationStrategy: PID 9682 died... 17:56:26.984074 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9682): Terminated: ok {rc=0} 17:56:27.072553 bus /gobi_0: Setting Powered False 17:56:28.181985 bus /gobi_0: Setting Powered False 17:56:29.291304 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9680): Process ended prematurely: osmo-stp_10.42.42.5(pid=9680) [trial-2380↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9680)]