Failed
gprs:sysmo+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=8921): Process ended prematurely: osmo-stp_10.42.42.5(pid=8921) [trial-2380↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8921)]
Standard Output
---------------------------------------------- trial-2380 gprs:sysmo+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 17:49:18.306307 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:49:18.317122 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 17:49:18.462617 tst cs_paging_gprs_active.py: using LAC 30467 17:49:18.585129 tst cs_paging_gprs_active.py: using RAC 122 17:49:18.704916 tst cs_paging_gprs_active.py: using CellId 30467 17:49:18.825184 tst cs_paging_gprs_active.py: using BVCI 30468 17:49:18.848527 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:49:18.859376 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:49:18.870115 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:49:18.881648 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:49:18.892633 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:49:18.903839 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:49:18.915121 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:49:18.926607 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:49:18.937834 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 17:49:19.055903 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 17:49:19.355809 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 17:49:19.494010 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:49:19.835395 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8911): Launched 17:49:20.120629 run iperf3-srv_10.42.42.10(pid=8912): Launched 17:49:20.322582 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 17:49:20.460579 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:49:20.802434 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8913): Launched 17:49:21.088181 run iperf3-srv_10.42.42.10(pid=8914): Launched 17:49:21.291024 tst cs_paging_gprs_active.py:38: start network... 17:49:21.429606 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:49:21.960574 run create_hlr_db(pid=8915): Launched 17:49:22.150671 bus /gobi_6: Setting Powered False 17:49:23.172657 run create_hlr_db(pid=8915): Terminated: ok {rc=0} 17:49:23.588934 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8917): Launched 17:49:23.898773 run osmo-hlr_10.42.42.2(pid=8918): Launched 17:49:24.016449 run osmo-stp_10.42.42.5: Starting osmo-stp 17:49:24.552449 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8920): Launched 17:49:24.862607 run osmo-stp_10.42.42.5(pid=8921): Launched 17:49:24.974817 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:49:25.513405 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8923): Launched 17:49:25.624055 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:49:25.894850 run patchelf(pid=8924): Launched 17:49:26.074862 run osmo-stp_10.42.42.5(pid=8921): ERR: Terminated: ERROR {rc=1} [trial-2380↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8921)] 17:49:26.206580 run osmo-stp_10.42.42.5(pid=8921): stdout: | (launched: 2022-12-12_17:49:24.709333) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:49:26.338557 run osmo-stp_10.42.42.5(pid=8921): stderr: | �[0;m�[38;5;43m20221212174924880 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212174924880 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212174924880 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212174924881 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212174924881 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212174924881 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212174924881 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:49:26.465925 run osmo-stp_10.42.42.5(pid=8921): stdout: | (launched: 2022-12-12_17:49:24.709333) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:49:26.592193 run osmo-stp_10.42.42.5(pid=8921): stderr: | �[0;m�[38;5;43m20221212174924880 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212174924880 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212174924880 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212174924881 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212174924881 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212174924881 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212174924881 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:49:26.739379 run patchelf(pid=8924): Terminating (SIGINT) 17:49:26.911821 run patchelf(pid=8924): Terminated: ok {rc=0} 17:49:26.943405 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8921): Process ended prematurely: osmo-stp_10.42.42.5(pid=8921) [trial-2380↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8921)] [trial-2380↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 17:49:26.952708 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 17:49:27.013694 run osmo-hlr_10.42.42.2(pid=8918): ERR: Terminated: ERROR {rc=237} [trial-2380↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8918)] 17:49:27.062849 run osmo-hlr_10.42.42.2(pid=8918): stdout: | (launched: 2022-12-12_17:49:23.745887) 17:49:27.113609 run osmo-hlr_10.42.42.2(pid=8918): stderr: | �[0;m�[1;31m20221212174923924 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212174923924 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212174923924 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212174923924 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212174923924 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212174923924 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212174923936 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2380/run.2022-12-12_17-41-28/gprs:sysmo+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212174923945 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212174923945 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212174923945 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:49:27.156041 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8911): Terminating (SIGTERM) 17:49:27.196415 run iperf3-srv_10.42.42.10(pid=8912): Terminating (SIGTERM) 17:49:27.236729 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8913): Terminating (SIGTERM) 17:49:27.277043 run iperf3-srv_10.42.42.10(pid=8914): Terminating (SIGTERM) 17:49:27.317358 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8917): Terminating (SIGTERM) 17:49:27.357528 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8920): Terminating (SIGTERM) 17:49:27.397771 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8923): Terminating (SIGTERM) 17:49:27.407299 --- ParallelTerminationStrategy: PID 8911 died... 17:49:27.461261 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8911): Terminated: ok {rc=0} 17:49:27.471275 --- ParallelTerminationStrategy: PID 8912 died... 17:49:27.524924 run iperf3-srv_10.42.42.10(pid=8912): Terminated {rc=256} 17:49:27.534883 --- ParallelTerminationStrategy: PID 8913 died... 17:49:27.588205 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8913): Terminated: ok {rc=0} 17:49:27.598152 --- ParallelTerminationStrategy: PID 8914 died... 17:49:27.651473 run iperf3-srv_10.42.42.10(pid=8914): Terminated {rc=256} 17:49:27.661186 --- ParallelTerminationStrategy: PID 8917 died... 17:49:27.714634 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8917): Terminated: ok {rc=0} 17:49:27.724328 --- ParallelTerminationStrategy: PID 8920 died... 17:49:27.777883 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8920): Terminated: ok {rc=0} 17:49:27.787883 --- ParallelTerminationStrategy: PID 8923 died... 17:49:27.842059 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8923): Terminated: ok {rc=0} 17:49:27.926720 bus /gobi_0: Setting Powered False 17:49:29.028126 bus /gobi_0: Setting Powered False 17:49:30.139627 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8921): Process ended prematurely: osmo-stp_10.42.42.5(pid=8921) [trial-2380↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8921)]