Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=13205): Process ended prematurely: osmo-stp_10.42.42.5(pid=13205) [trial-2380↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13205)]
Standard Output
---------------------------------------------- trial-2380 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 18:31:01.063997 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:31:01.075993 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 18:31:01.242254 tst cs_paging_gprs_active.py: using LAC 30688 18:31:01.438850 tst cs_paging_gprs_active.py: using RAC 88 18:31:01.566664 tst cs_paging_gprs_active.py: using CellId 30688 18:31:01.692022 tst cs_paging_gprs_active.py: using BVCI 30689 18:31:01.716879 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:31:01.729936 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:31:01.742624 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:31:01.755522 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:31:01.767569 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:31:01.781785 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:31:01.795157 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:31:01.806999 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:31:01.819913 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 18:31:01.946466 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 18:31:02.286776 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 18:31:02.425232 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:31:02.763828 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13195): Launched 18:31:03.046645 run iperf3-srv_10.42.42.10(pid=13196): Launched 18:31:03.246302 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 18:31:03.382916 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:31:03.720665 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13197): Launched 18:31:04.002758 run iperf3-srv_10.42.42.10(pid=13198): Launched 18:31:04.202625 tst cs_paging_gprs_active.py:38: start network... 18:31:04.338616 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:31:04.857327 run create_hlr_db(pid=13199): Launched 18:31:05.044398 bus /gobi_6: Setting Powered False 18:31:06.066682 run create_hlr_db(pid=13199): Terminated: ok {rc=0} 18:31:06.474115 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13201): Launched 18:31:06.778491 run osmo-hlr_10.42.42.2(pid=13202): Launched 18:31:06.895093 run osmo-stp_10.42.42.5: Starting osmo-stp 18:31:07.427454 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13204): Launched 18:31:07.731122 run osmo-stp_10.42.42.5(pid=13205): Launched 18:31:07.841626 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:31:08.369172 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13207): Launched 18:31:08.477311 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:31:08.742473 run patchelf(pid=13208): Launched 18:31:08.921965 run osmo-stp_10.42.42.5(pid=13205): ERR: Terminated: ERROR {rc=1} [trial-2380↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13205)] 18:31:09.051803 run osmo-stp_10.42.42.5(pid=13205): stdout: | (launched: 2022-12-12_18:31:07.581228) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:31:09.182246 run osmo-stp_10.42.42.5(pid=13205): stderr: | �[0;m�[38;5;43m20221212183107748 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212183107748 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212183107749 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212183107749 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212183107749 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212183107750 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212183107750 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:31:09.307612 run osmo-stp_10.42.42.5(pid=13205): stdout: | (launched: 2022-12-12_18:31:07.581228) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:31:09.432753 run osmo-stp_10.42.42.5(pid=13205): stderr: | �[0;m�[38;5;43m20221212183107748 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212183107748 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212183107749 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212183107749 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212183107749 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212183107750 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212183107750 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:31:09.578425 run patchelf(pid=13208): Terminating (SIGINT) 18:31:09.748394 run patchelf(pid=13208): Terminated: ok {rc=0} 18:31:09.779831 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13205): Process ended prematurely: osmo-stp_10.42.42.5(pid=13205) [trial-2380↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13205)] [trial-2380↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 18:31:09.789079 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 18:31:09.849913 run osmo-hlr_10.42.42.2(pid=13202): ERR: Terminated: ERROR {rc=237} [trial-2380↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13202)] 18:31:09.899013 run osmo-hlr_10.42.42.2(pid=13202): stdout: | (launched: 2022-12-12_18:31:06.628083) 18:31:09.948720 run osmo-hlr_10.42.42.2(pid=13202): stderr: | �[0;m�[1;31m20221212183106802 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212183106802 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212183106802 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212183106802 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212183106802 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212183106803 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212183106818 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2380/run.2022-12-12_17-41-28/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212183106828 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212183106828 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212183106828 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:31:09.990673 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13195): Terminating (SIGTERM) 18:31:10.030315 run iperf3-srv_10.42.42.10(pid=13196): Terminating (SIGTERM) 18:31:10.070138 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13197): Terminating (SIGTERM) 18:31:10.109800 run iperf3-srv_10.42.42.10(pid=13198): Terminating (SIGTERM) 18:31:10.149289 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13201): Terminating (SIGTERM) 18:31:10.188819 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13204): Terminating (SIGTERM) 18:31:10.228507 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13207): Terminating (SIGTERM) 18:31:10.237968 --- ParallelTerminationStrategy: PID 13195 died... 18:31:10.291279 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13195): Terminated: ok {rc=0} 18:31:10.301146 --- ParallelTerminationStrategy: PID 13196 died... 18:31:10.354077 run iperf3-srv_10.42.42.10(pid=13196): Terminated {rc=256} 18:31:10.363894 --- ParallelTerminationStrategy: PID 13197 died... 18:31:10.416599 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13197): Terminated: ok {rc=0} 18:31:10.426408 --- ParallelTerminationStrategy: PID 13198 died... 18:31:10.479142 run iperf3-srv_10.42.42.10(pid=13198): Terminated {rc=256} 18:31:10.488844 --- ParallelTerminationStrategy: PID 13201 died... 18:31:10.541910 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13201): Terminated: ok {rc=0} 18:31:10.551872 --- ParallelTerminationStrategy: PID 13204 died... 18:31:10.605653 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13204): Terminated: ok {rc=0} 18:31:10.615609 --- ParallelTerminationStrategy: PID 13207 died... 18:31:10.669496 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13207): Terminated: ok {rc=0} 18:31:10.757230 bus /gobi_0: Setting Powered False 18:31:11.860902 bus /gobi_0: Setting Powered False 18:31:12.972172 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13205): Process ended prematurely: osmo-stp_10.42.42.5(pid=13205) [trial-2380↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13205)]