Failed
gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=14163): Process ended prematurely: osmo-stp_10.42.42.5(pid=14163) [trial-2380↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14163)]
Standard Output
---------------------------------------------- trial-2380 gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 18:40:58.318164 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:40:58.329403 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 18:40:58.482444 tst cs_paging_gprs_active.py: using LAC 30740 18:40:58.601656 tst cs_paging_gprs_active.py: using RAC 140 18:40:58.723367 tst cs_paging_gprs_active.py: using CellId 30740 18:40:58.844196 tst cs_paging_gprs_active.py: using BVCI 30741 18:40:58.867568 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:40:58.878832 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:40:58.889893 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:40:58.901251 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:40:58.912513 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:40:58.923755 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:40:58.935171 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:40:58.946361 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:40:58.957818 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 18:40:59.079349 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 18:40:59.378525 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 18:40:59.514789 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:40:59.852188 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14153): Launched 18:41:00.135754 run iperf3-srv_10.42.42.10(pid=14154): Launched 18:41:00.335953 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 18:41:00.472801 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:41:00.812024 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14155): Launched 18:41:01.127641 run iperf3-srv_10.42.42.10(pid=14156): Launched 18:41:01.331731 tst cs_paging_gprs_active.py:38: start network... 18:41:01.471003 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:41:02.035502 run create_hlr_db(pid=14157): Launched 18:41:02.226684 bus /gobi_6: Setting Powered False 18:41:03.246140 run create_hlr_db(pid=14157): Terminated: ok {rc=0} 18:41:03.657791 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14159): Launched 18:41:03.966461 run osmo-hlr_10.42.42.2(pid=14160): Launched 18:41:04.085429 run osmo-stp_10.42.42.5: Starting osmo-stp 18:41:04.624305 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14162): Launched 18:41:04.932802 run osmo-stp_10.42.42.5(pid=14163): Launched 18:41:05.043976 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:41:05.576889 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14165): Launched 18:41:05.685213 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:41:05.960688 run patchelf(pid=14166): Launched 18:41:06.139759 run osmo-stp_10.42.42.5(pid=14163): ERR: Terminated: ERROR {rc=1} [trial-2380↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14163)] 18:41:06.270011 run osmo-stp_10.42.42.5(pid=14163): stdout: | (launched: 2022-12-12_18:41:04.779220) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:41:06.400453 run osmo-stp_10.42.42.5(pid=14163): stderr: | �[0;m�[38;5;43m20221212184104950 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212184104950 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212184104950 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212184104950 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212184104951 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212184104951 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212184104951 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:41:06.526270 run osmo-stp_10.42.42.5(pid=14163): stdout: | (launched: 2022-12-12_18:41:04.779220) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:41:06.650779 run osmo-stp_10.42.42.5(pid=14163): stderr: | �[0;m�[38;5;43m20221212184104950 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212184104950 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212184104950 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212184104950 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212184104951 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212184104951 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212184104951 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:41:06.796644 run patchelf(pid=14166): Terminating (SIGINT) 18:41:06.967831 run patchelf(pid=14166): Terminated: ok {rc=0} 18:41:06.999530 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=14163): Process ended prematurely: osmo-stp_10.42.42.5(pid=14163) [trial-2380↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14163)] [trial-2380↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 18:41:07.009052 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 18:41:07.070127 run osmo-hlr_10.42.42.2(pid=14160): ERR: Terminated: ERROR {rc=237} [trial-2380↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14160)] 18:41:07.119902 run osmo-hlr_10.42.42.2(pid=14160): stdout: | (launched: 2022-12-12_18:41:03.813179) 18:41:07.169855 run osmo-hlr_10.42.42.2(pid=14160): stderr: | �[0;m�[1;31m20221212184103990 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212184103990 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212184103990 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212184103990 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212184103990 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212184103990 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212184104002 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2380/run.2022-12-12_17-41-28/gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212184104013 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212184104013 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212184104013 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:41:07.212513 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14153): Terminating (SIGTERM) 18:41:07.252857 run iperf3-srv_10.42.42.10(pid=14154): Terminating (SIGTERM) 18:41:07.293473 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14155): Terminating (SIGTERM) 18:41:07.333375 run iperf3-srv_10.42.42.10(pid=14156): Terminating (SIGTERM) 18:41:07.373467 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14159): Terminating (SIGTERM) 18:41:07.413477 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14162): Terminating (SIGTERM) 18:41:07.453474 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14165): Terminating (SIGTERM) 18:41:07.463078 --- ParallelTerminationStrategy: PID 14153 died... 18:41:07.516859 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14153): Terminated: ok {rc=0} 18:41:07.526626 --- ParallelTerminationStrategy: PID 14154 died... 18:41:07.579843 run iperf3-srv_10.42.42.10(pid=14154): Terminated {rc=256} 18:41:07.589703 --- ParallelTerminationStrategy: PID 14155 died... 18:41:07.643503 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14155): Terminated: ok {rc=0} 18:41:07.653794 --- ParallelTerminationStrategy: PID 14156 died... 18:41:07.707663 run iperf3-srv_10.42.42.10(pid=14156): Terminated {rc=256} 18:41:07.717609 --- ParallelTerminationStrategy: PID 14159 died... 18:41:07.771099 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14159): Terminated: ok {rc=0} 18:41:07.781072 --- ParallelTerminationStrategy: PID 14162 died... 18:41:07.834756 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14162): Terminated: ok {rc=0} 18:41:07.844354 --- ParallelTerminationStrategy: PID 14165 died... 18:41:07.898111 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14165): Terminated: ok {rc=0} 18:41:07.987569 bus /gobi_0: Setting Powered False 18:41:09.091461 bus /gobi_0: Setting Powered False 18:41:10.198488 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14163): Process ended prematurely: osmo-stp_10.42.42.5(pid=14163) [trial-2380↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14163)]