Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=11277): Process ended prematurely: osmo-stp_10.42.42.5(pid=11277) [trial-2380↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11277)]
Standard Output
---------------------------------------------- trial-2380 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 18:14:52.724376 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:14:52.735979 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 18:14:52.904310 tst cs_paging_gprs_active.py: using LAC 30602 18:14:53.031256 tst cs_paging_gprs_active.py: using RAC 2 18:14:53.158591 tst cs_paging_gprs_active.py: using CellId 30602 18:14:53.285769 tst cs_paging_gprs_active.py: using BVCI 30603 18:14:53.310714 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:14:53.322368 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:14:53.333690 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:14:53.345063 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:14:53.356892 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:14:53.368433 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:14:53.379881 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:14:53.391396 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:14:53.403046 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 18:14:53.521655 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 18:14:53.803707 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 18:14:53.931221 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:14:54.250024 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11267): Launched 18:14:54.515465 run iperf3-srv_10.42.42.10(pid=11268): Launched 18:14:54.702318 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 18:14:54.829751 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:14:55.148752 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11269): Launched 18:14:55.414085 run iperf3-srv_10.42.42.10(pid=11270): Launched 18:14:55.600926 tst cs_paging_gprs_active.py:38: start network... 18:14:55.728758 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:14:56.213691 run create_hlr_db(pid=11271): Launched 18:14:56.389447 bus /gobi_6: Setting Powered False 18:14:57.412357 run create_hlr_db(pid=11271): Terminated: ok {rc=0} 18:14:57.822441 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11273): Launched 18:14:58.133526 run osmo-hlr_10.42.42.2(pid=11274): Launched 18:14:58.253784 run osmo-stp_10.42.42.5: Starting osmo-stp 18:14:58.793267 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11276): Launched 18:14:59.105805 run osmo-stp_10.42.42.5(pid=11277): Launched 18:14:59.217555 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:14:59.754382 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11279): Launched 18:14:59.863748 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:15:00.134197 run patchelf(pid=11280): Launched 18:15:00.313385 run osmo-stp_10.42.42.5(pid=11277): ERR: Terminated: ERROR {rc=1} [trial-2380↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11277)] 18:15:00.444431 run osmo-stp_10.42.42.5(pid=11277): stdout: | (launched: 2022-12-12_18:14:58.948748) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:15:00.576169 run osmo-stp_10.42.42.5(pid=11277): stderr: | �[0;m�[38;5;43m20221212181459116 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212181459116 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212181459117 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212181459117 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212181459118 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212181459118 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212181459118 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:15:00.702503 run osmo-stp_10.42.42.5(pid=11277): stdout: | (launched: 2022-12-12_18:14:58.948748) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:15:00.828433 run osmo-stp_10.42.42.5(pid=11277): stderr: | �[0;m�[38;5;43m20221212181459116 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212181459116 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212181459117 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212181459117 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212181459118 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212181459118 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212181459118 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:15:00.991171 run patchelf(pid=11280): Terminating (SIGINT) 18:15:01.166255 run patchelf(pid=11280): Terminated: ok {rc=0} 18:15:01.199423 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11277): Process ended prematurely: osmo-stp_10.42.42.5(pid=11277) [trial-2380↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11277)] [trial-2380↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 18:15:01.210022 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 18:15:01.275210 run osmo-hlr_10.42.42.2(pid=11274): ERR: Terminated: ERROR {rc=237} [trial-2380↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11274)] 18:15:01.327361 run osmo-hlr_10.42.42.2(pid=11274): stdout: | (launched: 2022-12-12_18:14:57.978804) 18:15:01.380260 run osmo-hlr_10.42.42.2(pid=11274): stderr: | �[0;m�[1;31m20221212181458155 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212181458155 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212181458155 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212181458155 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212181458155 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212181458155 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212181458166 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2380/run.2022-12-12_17-41-28/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212181458175 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212181458175 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212181458175 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:15:01.424199 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11267): Terminating (SIGTERM) 18:15:01.469614 run iperf3-srv_10.42.42.10(pid=11268): Terminating (SIGTERM) 18:15:01.511142 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11269): Terminating (SIGTERM) 18:15:01.555588 run iperf3-srv_10.42.42.10(pid=11270): Terminating (SIGTERM) 18:15:01.598273 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11273): Terminating (SIGTERM) 18:15:01.640675 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11276): Terminating (SIGTERM) 18:15:01.683849 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11279): Terminating (SIGTERM) 18:15:01.694900 --- ParallelTerminationStrategy: PID 11267 died... 18:15:01.752161 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11267): Terminated: ok {rc=0} 18:15:01.762670 --- ParallelTerminationStrategy: PID 11268 died... 18:15:01.818531 run iperf3-srv_10.42.42.10(pid=11268): Terminated {rc=256} 18:15:01.830191 --- ParallelTerminationStrategy: PID 11269 died... 18:15:01.887824 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11269): Terminated: ok {rc=0} 18:15:01.898461 --- ParallelTerminationStrategy: PID 11270 died... 18:15:01.953519 run iperf3-srv_10.42.42.10(pid=11270): Terminated {rc=256} 18:15:01.965208 --- ParallelTerminationStrategy: PID 11273 died... 18:15:02.032782 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11273): Terminated: ok {rc=0} 18:15:02.043631 --- ParallelTerminationStrategy: PID 11276 died... 18:15:02.103233 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11276): Terminated: ok {rc=0} 18:15:02.114008 --- ParallelTerminationStrategy: PID 11279 died... 18:15:02.170895 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11279): Terminated: ok {rc=0} 18:15:02.268770 bus /gobi_0: Setting Powered False 18:15:03.376671 bus /gobi_0: Setting Powered False 18:15:04.484567 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11277): Process ended prematurely: osmo-stp_10.42.42.5(pid=11277) [trial-2380↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11277)]