Failed
gprs:trx-umtrx+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=11852): Process ended prematurely: osmo-stp_10.42.42.5(pid=11852) [trial-2380↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11852)]
Standard Output
---------------------------------------------- trial-2380 gprs:trx-umtrx+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 18:23:05.801215 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:23:05.812633 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 18:23:05.978800 tst cs_paging_gprs_active.py: using LAC 30646 18:23:06.106350 tst cs_paging_gprs_active.py: using RAC 46 18:23:06.238400 tst cs_paging_gprs_active.py: using CellId 30646 18:23:06.365633 tst cs_paging_gprs_active.py: using BVCI 30647 18:23:06.390872 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:23:06.402374 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:23:06.413678 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:23:06.424911 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:23:06.436176 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:23:06.447592 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:23:06.459020 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:23:06.470213 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:23:06.481626 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 18:23:06.600072 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 18:23:06.898946 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 18:23:07.036798 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:23:07.376922 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11842): Launched 18:23:07.661557 run iperf3-srv_10.42.42.10(pid=11843): Launched 18:23:07.864296 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 18:23:08.010378 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:23:08.353268 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11844): Launched 18:23:08.638115 run iperf3-srv_10.42.42.10(pid=11845): Launched 18:23:08.839936 tst cs_paging_gprs_active.py:38: start network... 18:23:08.977175 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:23:09.505657 run create_hlr_db(pid=11846): Launched 18:23:09.695878 bus /gobi_6: Setting Powered False 18:23:10.717625 run create_hlr_db(pid=11846): Terminated: ok {rc=0} 18:23:11.131904 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11848): Launched 18:23:11.441539 run osmo-hlr_10.42.42.2(pid=11849): Launched 18:23:11.561625 run osmo-stp_10.42.42.5: Starting osmo-stp 18:23:12.099396 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11851): Launched 18:23:12.407467 run osmo-stp_10.42.42.5(pid=11852): Launched 18:23:12.519048 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:23:13.055181 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11854): Launched 18:23:13.164859 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:23:13.440933 run patchelf(pid=11855): Launched 18:23:13.620626 run osmo-stp_10.42.42.5(pid=11852): ERR: Terminated: ERROR {rc=1} [trial-2380↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11852)] 18:23:13.751699 run osmo-stp_10.42.42.5(pid=11852): stdout: | (launched: 2022-12-12_18:23:12.254753) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:23:13.882537 run osmo-stp_10.42.42.5(pid=11852): stderr: | �[0;m�[38;5;43m20221212182312423 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212182312423 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212182312424 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212182312424 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212182312424 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212182312425 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212182312425 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:23:14.008617 run osmo-stp_10.42.42.5(pid=11852): stdout: | (launched: 2022-12-12_18:23:12.254753) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:23:14.134005 run osmo-stp_10.42.42.5(pid=11852): stderr: | �[0;m�[38;5;43m20221212182312423 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212182312423 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212182312424 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212182312424 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212182312424 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212182312425 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212182312425 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:23:14.279875 run patchelf(pid=11855): Terminating (SIGINT) 18:23:14.451217 run patchelf(pid=11855): Terminated: ok {rc=0} 18:23:14.482807 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11852): Process ended prematurely: osmo-stp_10.42.42.5(pid=11852) [trial-2380↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11852)] [trial-2380↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 18:23:14.492099 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 18:23:14.552506 run osmo-hlr_10.42.42.2(pid=11849): ERR: Terminated: ERROR {rc=237} [trial-2380↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11849)] 18:23:14.601736 run osmo-hlr_10.42.42.2(pid=11849): stdout: | (launched: 2022-12-12_18:23:11.287472) 18:23:14.651401 run osmo-hlr_10.42.42.2(pid=11849): stderr: | �[0;m�[1;31m20221212182311460 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212182311460 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212182311461 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212182311461 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212182311461 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212182311461 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212182311476 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2380/run.2022-12-12_17-41-28/gprs:trx-umtrx+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212182311486 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212182311487 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212182311487 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:23:14.693545 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11842): Terminating (SIGTERM) 18:23:14.733739 run iperf3-srv_10.42.42.10(pid=11843): Terminating (SIGTERM) 18:23:14.773591 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11844): Terminating (SIGTERM) 18:23:14.813279 run iperf3-srv_10.42.42.10(pid=11845): Terminating (SIGTERM) 18:23:14.853066 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11848): Terminating (SIGTERM) 18:23:14.892797 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11851): Terminating (SIGTERM) 18:23:14.932517 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11854): Terminating (SIGTERM) 18:23:14.941854 --- ParallelTerminationStrategy: PID 11842 died... 18:23:14.994940 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11842): Terminated: ok {rc=0} 18:23:15.004676 --- ParallelTerminationStrategy: PID 11843 died... 18:23:15.057997 run iperf3-srv_10.42.42.10(pid=11843): Terminated {rc=256} 18:23:15.067848 --- ParallelTerminationStrategy: PID 11844 died... 18:23:15.120711 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11844): Terminated: ok {rc=0} 18:23:15.130555 --- ParallelTerminationStrategy: PID 11845 died... 18:23:15.183145 run iperf3-srv_10.42.42.10(pid=11845): Terminated {rc=256} 18:23:15.192908 --- ParallelTerminationStrategy: PID 11848 died... 18:23:15.245729 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11848): Terminated: ok {rc=0} 18:23:15.255570 --- ParallelTerminationStrategy: PID 11851 died... 18:23:15.308287 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11851): Terminated: ok {rc=0} 18:23:15.318160 --- ParallelTerminationStrategy: PID 11854 died... 18:23:15.371132 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11854): Terminated: ok {rc=0} 18:23:15.459715 bus /gobi_0: Setting Powered False 18:23:16.562649 bus /gobi_0: Setting Powered False 18:23:17.670549 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11852): Process ended prematurely: osmo-stp_10.42.42.5(pid=11852) [trial-2380↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11852)]