Failed
gprs:trx-lms-limenet-micro.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=13680): Process ended prematurely: osmo-stp_10.42.42.5(pid=13680) [trial-2380↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13680)]
Standard Output
---------------------------------------------- trial-2380 gprs:trx-lms-limenet-micro cs_paging_gprs_active.py ---------------------------------------------- 18:37:55.815333 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:37:55.826983 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 18:37:55.974828 tst cs_paging_gprs_active.py: using LAC 30725 18:37:56.100841 tst cs_paging_gprs_active.py: using RAC 125 18:37:56.230460 tst cs_paging_gprs_active.py: using CellId 30725 18:37:56.357549 tst cs_paging_gprs_active.py: using BVCI 30726 18:37:56.382757 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:37:56.394340 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:37:56.405746 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:37:56.416927 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:37:56.428235 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:37:56.439466 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:37:56.451006 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:37:56.462204 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:37:56.473686 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 18:37:56.591990 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 18:37:56.876062 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 18:37:57.004050 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:37:57.321202 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13670): Launched 18:37:57.585534 run iperf3-srv_10.42.42.10(pid=13671): Launched 18:37:57.771966 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 18:37:57.899028 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:37:58.216134 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13672): Launched 18:37:58.481639 run iperf3-srv_10.42.42.10(pid=13673): Launched 18:37:58.667683 tst cs_paging_gprs_active.py:38: start network... 18:37:58.794896 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:37:59.277332 run create_hlr_db(pid=13674): Launched 18:37:59.453459 bus /sierra_2: Setting Powered False 18:38:00.476678 run create_hlr_db(pid=13674): Terminated: ok {rc=0} 18:38:00.890083 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13676): Launched 18:38:01.293600 run osmo-hlr_10.42.42.2(pid=13677): Launched 18:38:01.463896 run osmo-stp_10.42.42.5: Starting osmo-stp 18:38:02.133398 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13679): Launched 18:38:02.474527 run osmo-stp_10.42.42.5(pid=13680): Launched 18:38:02.598154 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:38:03.167947 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13682): Launched 18:38:03.285905 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:38:03.574130 run patchelf(pid=13683): Launched 18:38:03.766156 run osmo-stp_10.42.42.5(pid=13680): ERR: Terminated: ERROR {rc=1} [trial-2380↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13680)] 18:38:03.906738 run osmo-stp_10.42.42.5(pid=13680): stdout: | (launched: 2022-12-12_18:38:02.306261) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:38:04.047511 run osmo-stp_10.42.42.5(pid=13680): stderr: | �[0;m�[38;5;43m20221212183802558 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212183802558 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212183802558 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212183802559 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212183802559 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212183802559 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212183802559 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:38:04.182963 run osmo-stp_10.42.42.5(pid=13680): stdout: | (launched: 2022-12-12_18:38:02.306261) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:38:04.317061 run osmo-stp_10.42.42.5(pid=13680): stderr: | �[0;m�[38;5;43m20221212183802558 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212183802558 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212183802558 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212183802559 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212183802559 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212183802559 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212183802559 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:38:04.473985 run patchelf(pid=13683): Terminating (SIGINT) 18:38:04.658072 run patchelf(pid=13683): Terminated: ok {rc=0} 18:38:04.691988 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13680): Process ended prematurely: osmo-stp_10.42.42.5(pid=13680) [trial-2380↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13680)] [trial-2380↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38] 18:38:04.702258 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 18:38:04.765493 run osmo-hlr_10.42.42.2(pid=13677): ERR: Terminated: ERROR {rc=237} [trial-2380↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13677)] 18:38:04.816709 run osmo-hlr_10.42.42.2(pid=13677): stdout: | (launched: 2022-12-12_18:38:01.064843) 18:38:04.868919 run osmo-hlr_10.42.42.2(pid=13677): stderr: | �[0;m�[1;31m20221212183801325 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212183801325 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212183801325 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212183801325 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212183801325 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212183801325 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212183801346 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2380/run.2022-12-12_17-41-28/gprs:trx-lms-limenet-micro/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212183801360 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212183801360 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212183801360 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:38:04.913514 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13670): Terminating (SIGTERM) 18:38:04.955338 run iperf3-srv_10.42.42.10(pid=13671): Terminating (SIGTERM) 18:38:04.997308 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13672): Terminating (SIGTERM) 18:38:05.039173 run iperf3-srv_10.42.42.10(pid=13673): Terminating (SIGTERM) 18:38:05.081100 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13676): Terminating (SIGTERM) 18:38:05.123026 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13679): Terminating (SIGTERM) 18:38:05.164839 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13682): Terminating (SIGTERM) 18:38:05.174840 --- ParallelTerminationStrategy: PID 13670 died... 18:38:05.231084 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13670): Terminated: ok {rc=0} 18:38:05.241389 --- ParallelTerminationStrategy: PID 13671 died... 18:38:05.296869 run iperf3-srv_10.42.42.10(pid=13671): Terminated {rc=256} 18:38:05.307098 --- ParallelTerminationStrategy: PID 13672 died... 18:38:05.362646 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13672): Terminated: ok {rc=0} 18:38:05.372775 --- ParallelTerminationStrategy: PID 13673 died... 18:38:05.428051 run iperf3-srv_10.42.42.10(pid=13673): Terminated {rc=256} 18:38:05.438244 --- ParallelTerminationStrategy: PID 13676 died... 18:38:05.493820 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13676): Terminated: ok {rc=0} 18:38:05.504074 --- ParallelTerminationStrategy: PID 13679 died... 18:38:05.559727 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13679): Terminated: ok {rc=0} 18:38:05.570053 --- ParallelTerminationStrategy: PID 13682 died... 18:38:05.625332 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13682): Terminated: ok {rc=0} 18:38:05.712566 bus /gobi_0: Setting Powered False 18:38:06.819201 bus /gobi_0: Setting Powered False 18:38:07.926146 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13680): Process ended prematurely: osmo-stp_10.42.42.5(pid=13680) [trial-2380↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13680)]