Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=26177): Process ended prematurely: osmo-stp_10.42.42.5(pid=26177) [trial-2382↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26177)]
Standard Output
---------------------------------------------- trial-2382 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 20:53:34.986713 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:53:34.997583 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 20:53:35.142437 tst cs_paging_gprs_active.py: using LAC 31436 20:53:35.265620 tst cs_paging_gprs_active.py: using RAC 71 20:53:35.386855 tst cs_paging_gprs_active.py: using CellId 31436 20:53:35.510632 tst cs_paging_gprs_active.py: using BVCI 31437 20:53:35.534562 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:53:35.545402 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:53:35.555858 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:53:35.566413 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:53:35.576782 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:53:35.587351 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:53:35.598082 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:53:35.608656 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:53:35.619529 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:53:35.740170 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:53:36.042788 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:53:36.182826 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:53:36.526348 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26167): Launched 20:53:36.812850 run iperf3-srv_10.42.42.10(pid=26168): Launched 20:53:37.017925 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:53:37.157974 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:53:37.502830 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26169): Launched 20:53:37.788307 run iperf3-srv_10.42.42.10(pid=26170): Launched 20:53:37.992161 tst cs_paging_gprs_active.py:38: start network... 20:53:38.131776 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:53:38.655390 run create_hlr_db(pid=26171): Launched 20:53:38.846969 bus /gobi_6: Setting Powered False 20:53:39.869396 run create_hlr_db(pid=26171): Terminated: ok {rc=0} 20:53:40.284271 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26173): Launched 20:53:40.593779 run osmo-hlr_10.42.42.2(pid=26174): Launched 20:53:40.709522 run osmo-stp_10.42.42.5: Starting osmo-stp 20:53:41.245373 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26176): Launched 20:53:41.553600 run osmo-stp_10.42.42.5(pid=26177): Launched 20:53:41.666090 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:53:42.203829 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26179): Launched 20:53:42.314709 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:53:42.583668 run patchelf(pid=26180): Launched 20:53:42.764138 run osmo-stp_10.42.42.5(pid=26177): ERR: Terminated: ERROR {rc=1} [trial-2382↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26177)] 20:53:42.896593 run osmo-stp_10.42.42.5(pid=26177): stdout: | (launched: 2022-12-12_20:53:41.402533) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:53:43.028906 run osmo-stp_10.42.42.5(pid=26177): stderr: | �[0;m�[38;5;43m20221212205341571 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212205341571 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212205341572 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212205341572 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212205341572 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212205341573 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212205341573 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:53:43.157153 run osmo-stp_10.42.42.5(pid=26177): stdout: | (launched: 2022-12-12_20:53:41.402533) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:53:43.284618 run osmo-stp_10.42.42.5(pid=26177): stderr: | �[0;m�[38;5;43m20221212205341571 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212205341571 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212205341572 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212205341572 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212205341572 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212205341573 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212205341573 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:53:43.432407 run patchelf(pid=26180): Terminating (SIGINT) 20:53:43.606706 run patchelf(pid=26180): Terminated: ok {rc=0} 20:53:43.638573 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=26177): Process ended prematurely: osmo-stp_10.42.42.5(pid=26177) [trial-2382↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26177)] [trial-2382↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 20:53:43.647753 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 20:53:43.708400 run osmo-hlr_10.42.42.2(pid=26174): ERR: Terminated: ERROR {rc=237} [trial-2382↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26174)] 20:53:43.758054 run osmo-hlr_10.42.42.2(pid=26174): stdout: | (launched: 2022-12-12_20:53:40.441368) 20:53:43.808558 run osmo-hlr_10.42.42.2(pid=26174): stderr: | �[0;m�[1;31m20221212205340616 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212205340616 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212205340616 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212205340616 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212205340616 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212205340617 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212205340633 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2382/run.2022-12-12_20-36-34/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212205340644 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212205340644 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212205340644 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:53:43.851998 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26167): Terminating (SIGTERM) 20:53:43.892247 run iperf3-srv_10.42.42.10(pid=26168): Terminating (SIGTERM) 20:53:43.932627 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26169): Terminating (SIGTERM) 20:53:43.972938 run iperf3-srv_10.42.42.10(pid=26170): Terminating (SIGTERM) 20:53:44.013893 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26173): Terminating (SIGTERM) 20:53:44.054324 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26176): Terminating (SIGTERM) 20:53:44.094697 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26179): Terminating (SIGTERM) 20:53:44.103923 --- ParallelTerminationStrategy: PID 26167 died... 20:53:44.157877 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26167): Terminated: ok {rc=0} 20:53:44.167546 --- ParallelTerminationStrategy: PID 26168 died... 20:53:44.220913 run iperf3-srv_10.42.42.10(pid=26168): Terminated {rc=256} 20:53:44.230537 --- ParallelTerminationStrategy: PID 26169 died... 20:53:44.284396 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26169): Terminated: ok {rc=0} 20:53:44.294037 --- ParallelTerminationStrategy: PID 26170 died... 20:53:44.348015 run iperf3-srv_10.42.42.10(pid=26170): Terminated {rc=256} 20:53:44.357803 --- ParallelTerminationStrategy: PID 26173 died... 20:53:44.411461 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26173): Terminated: ok {rc=0} 20:53:44.421116 --- ParallelTerminationStrategy: PID 26176 died... 20:53:44.474462 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26176): Terminated: ok {rc=0} 20:53:44.484100 --- ParallelTerminationStrategy: PID 26179 died... 20:53:44.537485 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26179): Terminated: ok {rc=0} 20:53:44.627386 bus /gobi_0: Setting Powered False 20:53:45.731517 bus /gobi_0: Setting Powered False 20:53:46.885881 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26177): Process ended prematurely: osmo-stp_10.42.42.5(pid=26177) [trial-2382↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26177)]