Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=27032): Process ended prematurely: osmo-stp_10.42.42.5(pid=27032) [trial-2382↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27032)]
Standard Output
---------------------------------------------- trial-2382 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 21:01:22.709247 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:01:22.720286 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 21:01:22.881580 tst cs_paging_gprs_active.py: using LAC 31477 21:01:23.006264 tst cs_paging_gprs_active.py: using RAC 112 21:01:23.132734 tst cs_paging_gprs_active.py: using CellId 31477 21:01:23.257012 tst cs_paging_gprs_active.py: using BVCI 31478 21:01:23.281402 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:01:23.292343 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:01:23.303215 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:01:23.314106 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:01:23.324781 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:01:23.335690 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:01:23.346736 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:01:23.357523 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:01:23.368398 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 21:01:23.492401 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 21:01:23.801614 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 21:01:23.945460 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:01:24.298556 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27022): Launched 21:01:24.591815 run iperf3-srv_10.42.42.10(pid=27023): Launched 21:01:24.802068 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 21:01:24.946053 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:01:25.298353 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27024): Launched 21:01:25.591025 run iperf3-srv_10.42.42.10(pid=27025): Launched 21:01:25.801279 tst cs_paging_gprs_active.py:38: start network... 21:01:25.944729 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:01:26.481428 run create_hlr_db(pid=27026): Launched 21:01:26.678245 bus /gobi_6: Setting Powered False 21:01:27.700458 run create_hlr_db(pid=27026): Terminated: ok {rc=0} 21:01:28.151299 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27028): Launched 21:01:28.494667 run osmo-hlr_10.42.42.2(pid=27029): Launched 21:01:28.618395 run osmo-stp_10.42.42.5: Starting osmo-stp 21:01:29.209146 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27031): Launched 21:01:29.552681 run osmo-stp_10.42.42.5(pid=27032): Launched 21:01:29.677036 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:01:30.270169 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27034): Launched 21:01:30.392492 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:01:30.688904 run patchelf(pid=27035): Launched 21:01:30.888511 run osmo-stp_10.42.42.5(pid=27032): ERR: Terminated: ERROR {rc=1} [trial-2382↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27032)] 21:01:31.036153 run osmo-stp_10.42.42.5(pid=27032): stdout: | (launched: 2022-12-12_21:01:29.382644) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:01:31.185170 run osmo-stp_10.42.42.5(pid=27032): stderr: | �[0;m�[38;5;43m20221212210129579 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212210129579 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212210129580 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212210129580 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212210129580 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212210129581 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212210129581 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:01:31.329494 run osmo-stp_10.42.42.5(pid=27032): stdout: | (launched: 2022-12-12_21:01:29.382644) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:01:31.473650 run osmo-stp_10.42.42.5(pid=27032): stderr: | �[0;m�[38;5;43m20221212210129579 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212210129579 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212210129580 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212210129580 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212210129580 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212210129581 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212210129581 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:01:31.640649 run patchelf(pid=27035): Terminating (SIGINT) 21:01:31.835451 run patchelf(pid=27035): Terminated: ok {rc=0} 21:01:31.872071 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=27032): Process ended prematurely: osmo-stp_10.42.42.5(pid=27032) [trial-2382↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27032)] [trial-2382↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 21:01:31.883697 tst cs_paging_gprs_active.py:38: Test FAILED (9.2 sec) 21:01:31.953461 run osmo-hlr_10.42.42.2(pid=27029): ERR: Terminated: ERROR {rc=237} [trial-2382↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27029)] 21:01:32.008684 run osmo-hlr_10.42.42.2(pid=27029): stdout: | (launched: 2022-12-12_21:01:28.324623) 21:01:32.064910 run osmo-hlr_10.42.42.2(pid=27029): stderr: | �[0;m�[1;31m20221212210128524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212210128524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212210128524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212210128524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212210128524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212210128524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212210128564 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2382/run.2022-12-12_20-36-34/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212210128574 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212210128574 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212210128574 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:01:32.111571 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27022): Terminating (SIGTERM) 21:01:32.157922 run iperf3-srv_10.42.42.10(pid=27023): Terminating (SIGTERM) 21:01:32.203460 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27024): Terminating (SIGTERM) 21:01:32.246370 run iperf3-srv_10.42.42.10(pid=27025): Terminating (SIGTERM) 21:01:32.289604 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27028): Terminating (SIGTERM) 21:01:32.332614 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27031): Terminating (SIGTERM) 21:01:32.376019 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27034): Terminating (SIGTERM) 21:01:32.386262 --- ParallelTerminationStrategy: PID 27022 died... 21:01:32.444426 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27022): Terminated: ok {rc=0} 21:01:32.455049 --- ParallelTerminationStrategy: PID 27023 died... 21:01:32.512634 run iperf3-srv_10.42.42.10(pid=27023): Terminated {rc=256} 21:01:32.522918 --- ParallelTerminationStrategy: PID 27024 died... 21:01:32.580099 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27024): Terminated: ok {rc=0} 21:01:32.590587 --- ParallelTerminationStrategy: PID 27025 died... 21:01:32.647609 run iperf3-srv_10.42.42.10(pid=27025): Terminated {rc=256} 21:01:32.658126 --- ParallelTerminationStrategy: PID 27028 died... 21:01:32.715351 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27028): Terminated: ok {rc=0} 21:01:32.725939 --- ParallelTerminationStrategy: PID 27031 died... 21:01:32.782802 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27031): Terminated: ok {rc=0} 21:01:32.793465 --- ParallelTerminationStrategy: PID 27034 died... 21:01:32.850787 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27034): Terminated: ok {rc=0} 21:01:32.940844 bus /gobi_0: Setting Powered False 21:01:34.048508 bus /gobi_0: Setting Powered False 21:01:35.158841 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27032): Process ended prematurely: osmo-stp_10.42.42.5(pid=27032) [trial-2382↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27032)]