Failed
gprs:trx-lms-limenet-micro.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=30450): Process ended prematurely: osmo-stp_10.42.42.5(pid=30450) [trial-2382↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30450)]
Standard Output
---------------------------------------------- trial-2382 gprs:trx-lms-limenet-micro cs_paging_gprs_active.py ---------------------------------------------- 21:34:24.318987 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:34:24.330492 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 21:34:24.477455 tst cs_paging_gprs_active.py: using LAC 31647 21:34:24.612111 tst cs_paging_gprs_active.py: using RAC 27 21:34:24.746422 tst cs_paging_gprs_active.py: using CellId 31647 21:34:24.879217 tst cs_paging_gprs_active.py: using BVCI 31648 21:34:24.905507 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:34:24.916925 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:34:24.928245 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:34:24.939762 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:34:24.951325 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:34:24.962831 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:34:24.974611 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:34:24.986043 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:34:24.997661 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 21:34:25.120721 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 21:34:25.429800 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 21:34:25.574966 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:34:25.933134 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30440): Launched 21:34:26.233658 run iperf3-srv_10.42.42.10(pid=30441): Launched 21:34:26.446624 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 21:34:26.591597 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:34:26.950857 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30442): Launched 21:34:27.248083 run iperf3-srv_10.42.42.10(pid=30443): Launched 21:34:27.461105 tst cs_paging_gprs_active.py:38: start network... 21:34:27.606248 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:34:28.149090 run create_hlr_db(pid=30444): Launched 21:34:28.348125 bus /sierra_2: Setting Powered False 21:34:29.370144 run create_hlr_db(pid=30444): Terminated: ok {rc=0} 21:34:29.803073 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30446): Launched 21:34:30.127781 run osmo-hlr_10.42.42.2(pid=30447): Launched 21:34:30.246731 run osmo-stp_10.42.42.5: Starting osmo-stp 21:34:30.803229 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30449): Launched 21:34:31.272703 run osmo-stp_10.42.42.5(pid=30450): Launched 21:34:31.451775 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:34:32.087992 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30452): Launched 21:34:32.214627 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:34:32.519202 run patchelf(pid=30453): Launched 21:34:32.720140 run osmo-stp_10.42.42.5(pid=30450): ERR: Terminated: ERROR {rc=1} [trial-2382↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30450)] 21:34:32.866910 run osmo-stp_10.42.42.5(pid=30450): stdout: | (launched: 2022-12-12_21:34:30.981523) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:34:33.014089 run osmo-stp_10.42.42.5(pid=30450): stderr: | �[0;m�[38;5;43m20221212213431253 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212213431253 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212213431253 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212213431254 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212213431254 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212213431254 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212213431254 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:34:33.155883 run osmo-stp_10.42.42.5(pid=30450): stdout: | (launched: 2022-12-12_21:34:30.981523) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:34:33.296837 run osmo-stp_10.42.42.5(pid=30450): stderr: | �[0;m�[38;5;43m20221212213431253 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212213431253 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212213431253 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212213431254 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212213431254 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212213431254 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212213431254 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:34:33.461877 run patchelf(pid=30453): Terminating (SIGINT) 21:34:33.655189 run patchelf(pid=30453): Terminated: ok {rc=0} 21:34:33.690723 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=30450): Process ended prematurely: osmo-stp_10.42.42.5(pid=30450) [trial-2382↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30450)] [trial-2382↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38] 21:34:33.700887 tst cs_paging_gprs_active.py:38: Test FAILED (9.4 sec) 21:34:33.767013 run osmo-hlr_10.42.42.2(pid=30447): ERR: Terminated: ERROR {rc=237} [trial-2382↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30447)] 21:34:33.820646 run osmo-hlr_10.42.42.2(pid=30447): stdout: | (launched: 2022-12-12_21:34:29.966223) 21:34:33.874597 run osmo-hlr_10.42.42.2(pid=30447): stderr: | �[0;m�[1;31m20221212213430147 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212213430147 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212213430147 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212213430147 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212213430147 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212213430147 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212213430160 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2382/run.2022-12-12_20-36-34/gprs:trx-lms-limenet-micro/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212213430170 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212213430170 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212213430170 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:34:33.920574 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30440): Terminating (SIGTERM) 21:34:33.963712 run iperf3-srv_10.42.42.10(pid=30441): Terminating (SIGTERM) 21:34:34.006846 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30442): Terminating (SIGTERM) 21:34:34.050350 run iperf3-srv_10.42.42.10(pid=30443): Terminating (SIGTERM) 21:34:34.093444 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30446): Terminating (SIGTERM) 21:34:34.136617 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30449): Terminating (SIGTERM) 21:34:34.179781 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30452): Terminating (SIGTERM) 21:34:34.189904 --- ParallelTerminationStrategy: PID 30440 died... 21:34:34.247891 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30440): Terminated: ok {rc=0} 21:34:34.258379 --- ParallelTerminationStrategy: PID 30441 died... 21:34:34.316197 run iperf3-srv_10.42.42.10(pid=30441): Terminated {rc=256} 21:34:34.326658 --- ParallelTerminationStrategy: PID 30442 died... 21:34:34.385678 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30442): Terminated: ok {rc=0} 21:34:34.396565 --- ParallelTerminationStrategy: PID 30443 died... 21:34:34.456774 run iperf3-srv_10.42.42.10(pid=30443): Terminated {rc=256} 21:34:34.467661 --- ParallelTerminationStrategy: PID 30446 died... 21:34:34.525523 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30446): Terminated: ok {rc=0} 21:34:34.536472 --- ParallelTerminationStrategy: PID 30449 died... 21:34:34.594287 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30449): Terminated: ok {rc=0} 21:34:34.605214 --- ParallelTerminationStrategy: PID 30452 died... 21:34:34.663155 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30452): Terminated: ok {rc=0} 21:34:34.751903 bus /gobi_0: Setting Powered False 21:34:35.861326 bus /gobi_0: Setting Powered False 21:34:36.971665 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30450): Process ended prematurely: osmo-stp_10.42.42.5(pid=30450) [trial-2382↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30450)]