Failed
dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=29235): Process ended prematurely: osmo-stp_10.42.42.5(pid=29235) [trial-2382↪dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29235)]
Standard Output
---------------------------------------------- trial-2382 dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 21:21:56.864693 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 21:21:56.876583 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 21:21:57.043445 tst switch_tch_pdch.py: using LAC 31583 21:21:57.172740 tst switch_tch_pdch.py: using RAC 218 21:21:57.300109 tst switch_tch_pdch.py: using CellId 31583 21:21:57.429187 tst switch_tch_pdch.py: using BVCI 31584 21:21:57.454184 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 21:21:57.466013 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 21:21:57.477649 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 21:21:57.489927 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 21:21:57.501965 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 21:21:57.513924 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 21:21:57.526285 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 21:21:57.538590 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 21:21:57.657249 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 21:21:57.953011 tst switch_tch_pdch.py:51: start network... 21:21:58.090264 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:21:58.604209 run create_hlr_db(pid=29229): Launched 21:21:58.793631 bus /gobi_6: Setting Powered False 21:21:59.814701 run create_hlr_db(pid=29229): Terminated: ok {rc=0} 21:22:00.248111 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29231): Launched 21:22:00.575890 run osmo-hlr_10.42.42.2(pid=29232): Launched 21:22:00.695576 run osmo-stp_10.42.42.5: Starting osmo-stp 21:22:01.288674 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29234): Launched 21:22:01.687482 run osmo-stp_10.42.42.5(pid=29235): Launched 21:22:01.827266 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:22:02.461479 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29237): Launched 21:22:02.569777 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:22:02.835646 run patchelf(pid=29238): Launched 21:22:03.014502 run osmo-stp_10.42.42.5(pid=29235): ERR: Terminated: ERROR {rc=1} [trial-2382↪dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29235)] 21:22:03.145427 run osmo-stp_10.42.42.5(pid=29235): stdout: | (launched: 2022-12-12_21:22:01.449678) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:22:03.276775 run osmo-stp_10.42.42.5(pid=29235): stderr: | �[0;m�[38;5;43m20221212212201783 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212212201783 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212212201783 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212212201784 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212212201784 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212212201784 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212212201784 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:22:03.402910 run osmo-stp_10.42.42.5(pid=29235): stdout: | (launched: 2022-12-12_21:22:01.449678) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:22:03.527984 run osmo-stp_10.42.42.5(pid=29235): stderr: | �[0;m�[38;5;43m20221212212201783 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212212201783 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212212201783 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212212201784 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212212201784 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212212201784 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212212201784 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:22:03.674373 run patchelf(pid=29238): Terminating (SIGINT) 21:22:03.847244 run patchelf(pid=29238): Terminated: ok {rc=0} 21:22:03.878493 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=29235): Process ended prematurely: osmo-stp_10.42.42.5(pid=29235) [trial-2382↪dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29235)] [trial-2382↪dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54] 21:22:03.887306 tst switch_tch_pdch.py:54: Test FAILED (7.0 sec) 21:22:03.948125 run osmo-hlr_10.42.42.2(pid=29232): ERR: Terminated: ERROR {rc=237} [trial-2382↪dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29232)] 21:22:03.998214 run osmo-hlr_10.42.42.2(pid=29232): stdout: | (launched: 2022-12-12_21:22:00.414883) 21:22:04.049294 run osmo-hlr_10.42.42.2(pid=29232): stderr: | �[0;m�[1;31m20221212212200608 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212212200608 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212212200608 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212212200608 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212212200608 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212212200608 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212212200620 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2382/run.2022-12-12_20-36-34/dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212212200629 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212212200629 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212212200629 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:22:04.092571 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29231): Terminating (SIGTERM) 21:22:04.133639 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29234): Terminating (SIGTERM) 21:22:04.174437 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29237): Terminating (SIGTERM) 21:22:04.183817 --- ParallelTerminationStrategy: PID 29231 died... 21:22:04.238755 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29231): Terminated: ok {rc=0} 21:22:04.248516 --- ParallelTerminationStrategy: PID 29234 died... 21:22:04.302825 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29234): Terminated: ok {rc=0} 21:22:04.312618 --- ParallelTerminationStrategy: PID 29237 died... 21:22:04.366888 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29237): Terminated: ok {rc=0} 21:22:04.457412 bus /gobi_0: Setting Powered False 21:22:05.565974 bus /gobi_0: Setting Powered False 21:22:06.678637 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29235): Process ended prematurely: osmo-stp_10.42.42.5(pid=29235) [trial-2382↪dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29235)]