Failed
gprs:nanobts+band-1900.cs_paging_gprs_active.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=6847): Process ended prematurely: osmo-stp_10.42.42.5(pid=6847) [trial-2383↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6847)]
Standard Output
---------------------------------------------- trial-2383 gprs:nanobts+band-1900 cs_paging_gprs_active.py ---------------------------------------------- 23:09:24.466789 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 23:09:24.477949 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 23:09:24.611390 tst cs_paging_gprs_active.py: using LAC 32146 23:09:24.739377 tst cs_paging_gprs_active.py: using RAC 16 23:09:24.867398 tst cs_paging_gprs_active.py: using CellId 32146 23:09:24.995181 tst cs_paging_gprs_active.py: using BVCI 32147 23:09:25.020164 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 23:09:25.031413 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 23:09:25.042394 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 23:09:25.053391 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 23:09:25.064338 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 23:09:25.075265 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 23:09:25.086424 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 23:09:25.097374 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 23:09:25.108406 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 23:09:25.226697 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 23:09:25.524799 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 23:09:25.661107 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:09:25.998664 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6837): Launched 23:09:26.279430 run iperf3-srv_10.42.42.10(pid=6838): Launched 23:09:26.479239 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 23:09:26.614930 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:09:26.951817 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6839): Launched 23:09:27.233083 run iperf3-srv_10.42.42.10(pid=6840): Launched 23:09:27.432562 tst cs_paging_gprs_active.py:38: start network... 23:09:27.568446 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:09:28.088294 run create_hlr_db(pid=6841): Launched 23:09:28.276919 bus /sierra_2: Setting Powered False 23:09:29.298155 run create_hlr_db(pid=6841): Terminated: ok {rc=0} 23:09:29.708739 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6843): Launched 23:09:30.017210 run osmo-hlr_10.42.42.2(pid=6844): Launched 23:09:30.134405 run osmo-stp_10.42.42.5: Starting osmo-stp 23:09:30.668216 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6846): Launched 23:09:31.139117 run osmo-stp_10.42.42.5(pid=6847): Launched 23:09:31.332836 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:09:31.925633 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6849): Launched 23:09:32.044568 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:09:32.347174 run patchelf(pid=6850): Launched 23:09:32.538300 run osmo-stp_10.42.42.5(pid=6847): ERR: Terminated: ERROR {rc=1} [trial-2383↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6847)] 23:09:32.677918 run osmo-stp_10.42.42.5(pid=6847): stdout: | (launched: 2022-12-12_23:09:30.824126) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:09:32.817299 run osmo-stp_10.42.42.5(pid=6847): stderr: | �[0;m�[38;5;43m20221212230931106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212230931106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212230931107 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212230931107 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212230931109 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212230931110 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212230931110 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:09:32.952545 run osmo-stp_10.42.42.5(pid=6847): stdout: | (launched: 2022-12-12_23:09:30.824126) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:09:33.086664 run osmo-stp_10.42.42.5(pid=6847): stderr: | �[0;m�[38;5;43m20221212230931106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212230931106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212230931107 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212230931107 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212230931109 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212230931110 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212230931110 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:09:33.243548 run patchelf(pid=6850): Terminating (SIGINT) 23:09:33.427506 run patchelf(pid=6850): Terminated: ok {rc=0} 23:09:33.460889 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=6847): Process ended prematurely: osmo-stp_10.42.42.5(pid=6847) [trial-2383↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6847)] [trial-2383↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38] 23:09:33.470734 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 23:09:33.533342 run osmo-hlr_10.42.42.2(pid=6844): ERR: Terminated: ERROR {rc=237} [trial-2383↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6844)] 23:09:33.584436 run osmo-hlr_10.42.42.2(pid=6844): stdout: | (launched: 2022-12-12_23:09:29.865712) 23:09:33.636211 run osmo-hlr_10.42.42.2(pid=6844): stderr: | �[0;m�[1;31m20221212230930044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212230930044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212230930044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212230930044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212230930044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212230930044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212230930056 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2383/run.2022-12-12_22-05-43/gprs:nanobts+band-1900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212230930065 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212230930065 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212230930065 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:09:33.680336 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6837): Terminating (SIGTERM) 23:09:33.721956 run iperf3-srv_10.42.42.10(pid=6838): Terminating (SIGTERM) 23:09:33.763423 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6839): Terminating (SIGTERM) 23:09:33.804926 run iperf3-srv_10.42.42.10(pid=6840): Terminating (SIGTERM) 23:09:33.846464 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6843): Terminating (SIGTERM) 23:09:33.888172 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6846): Terminating (SIGTERM) 23:09:33.930613 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6849): Terminating (SIGTERM) 23:09:33.940389 --- ParallelTerminationStrategy: PID 6837 died... 23:09:33.996354 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6837): Terminated: ok {rc=0} 23:09:34.006468 --- ParallelTerminationStrategy: PID 6838 died... 23:09:34.062164 run iperf3-srv_10.42.42.10(pid=6838): Terminated {rc=256} 23:09:34.072153 --- ParallelTerminationStrategy: PID 6839 died... 23:09:34.127668 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6839): Terminated: ok {rc=0} 23:09:34.137969 --- ParallelTerminationStrategy: PID 6840 died... 23:09:34.193781 run iperf3-srv_10.42.42.10(pid=6840): Terminated {rc=256} 23:09:34.203786 --- ParallelTerminationStrategy: PID 6843 died... 23:09:34.258715 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6843): Terminated: ok {rc=0} 23:09:34.268616 --- ParallelTerminationStrategy: PID 6846 died... 23:09:34.323816 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6846): Terminated: ok {rc=0} 23:09:34.333930 --- ParallelTerminationStrategy: PID 6849 died... 23:09:34.390576 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6849): Terminated: ok {rc=0} 23:09:34.479145 bus /gobi_0: Setting Powered False 23:09:35.584813 bus /gobi_0: Setting Powered False 23:09:36.691341 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6847): Process ended prematurely: osmo-stp_10.42.42.5(pid=6847) [trial-2383↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6847)]