Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=7490): Process ended prematurely: osmo-stp_10.42.42.5(pid=7490) [trial-2383↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7490)]
Standard Output
---------------------------------------------- trial-2383 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 23:18:38.801125 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:18:38.812336 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 23:18:38.951133 tst cs_paging_gprs_active.py: using LAC 32194 23:18:39.073274 tst cs_paging_gprs_active.py: using RAC 64 23:18:39.195366 tst cs_paging_gprs_active.py: using CellId 32194 23:18:39.318173 tst cs_paging_gprs_active.py: using BVCI 32195 23:18:39.341570 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:18:39.352791 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:18:39.363791 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:18:39.375198 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:18:39.386580 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:18:39.397868 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:18:39.409300 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:18:39.420597 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:18:39.432185 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 23:18:39.552505 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 23:18:39.831642 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 23:18:39.962499 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:18:40.299121 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7480): Launched 23:18:40.579269 run iperf3-srv_10.42.42.10(pid=7481): Launched 23:18:40.778754 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 23:18:40.914539 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:18:41.249922 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7482): Launched 23:18:41.529682 run iperf3-srv_10.42.42.10(pid=7483): Launched 23:18:41.728660 tst cs_paging_gprs_active.py:38: start network... 23:18:41.864456 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:18:42.386412 run create_hlr_db(pid=7484): Launched 23:18:42.574944 bus /gobi_6: Setting Powered False 23:18:43.596299 run create_hlr_db(pid=7484): Terminated: ok {rc=0} 23:18:44.005934 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7486): Launched 23:18:44.314075 run osmo-hlr_10.42.42.2(pid=7487): Launched 23:18:44.428798 run osmo-stp_10.42.42.5: Starting osmo-stp 23:18:44.960296 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7489): Launched 23:18:45.265982 run osmo-stp_10.42.42.5(pid=7490): Launched 23:18:45.378032 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:18:45.936591 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7492): Launched 23:18:46.069202 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:18:46.375295 run patchelf(pid=7493): Launched 23:18:46.571701 run osmo-stp_10.42.42.5(pid=7490): ERR: Terminated: ERROR {rc=1} [trial-2383↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7490)] 23:18:46.715219 run osmo-stp_10.42.42.5(pid=7490): stdout: | (launched: 2022-12-12_23:18:45.115089) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:18:46.859122 run osmo-stp_10.42.42.5(pid=7490): stderr: | �[0;m�[38;5;43m20221212231845286 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212231845287 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212231845287 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212231845287 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212231845288 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212231845288 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212231845288 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:18:47.000235 run osmo-stp_10.42.42.5(pid=7490): stdout: | (launched: 2022-12-12_23:18:45.115089) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:18:47.136429 run osmo-stp_10.42.42.5(pid=7490): stderr: | �[0;m�[38;5;43m20221212231845286 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212231845287 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212231845287 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212231845287 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212231845288 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212231845288 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212231845288 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:18:47.294243 run patchelf(pid=7493): Terminating (SIGINT) 23:18:47.478629 run patchelf(pid=7493): Terminated: ok {rc=0} 23:18:47.512446 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=7490): Process ended prematurely: osmo-stp_10.42.42.5(pid=7490) [trial-2383↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7490)] [trial-2383↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 23:18:47.522679 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 23:18:47.585263 run osmo-hlr_10.42.42.2(pid=7487): ERR: Terminated: ERROR {rc=237} [trial-2383↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7487)] 23:18:47.636427 run osmo-hlr_10.42.42.2(pid=7487): stdout: | (launched: 2022-12-12_23:18:44.161818) 23:18:47.688010 run osmo-hlr_10.42.42.2(pid=7487): stderr: | �[0;m�[1;31m20221212231844339 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212231844339 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212231844339 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212231844339 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212231844339 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212231844339 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212231844351 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2383/run.2022-12-12_22-05-43/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212231844362 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212231844362 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212231844362 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:18:47.731860 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7480): Terminating (SIGTERM) 23:18:47.773401 run iperf3-srv_10.42.42.10(pid=7481): Terminating (SIGTERM) 23:18:47.814804 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7482): Terminating (SIGTERM) 23:18:47.856276 run iperf3-srv_10.42.42.10(pid=7483): Terminating (SIGTERM) 23:18:47.897837 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7486): Terminating (SIGTERM) 23:18:47.939287 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7489): Terminating (SIGTERM) 23:18:47.980754 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7492): Terminating (SIGTERM) 23:18:47.990352 --- ParallelTerminationStrategy: PID 7480 died... 23:18:48.045919 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7480): Terminated: ok {rc=0} 23:18:48.055887 --- ParallelTerminationStrategy: PID 7481 died... 23:18:48.110823 run iperf3-srv_10.42.42.10(pid=7481): Terminated {rc=256} 23:18:48.120740 --- ParallelTerminationStrategy: PID 7482 died... 23:18:48.176114 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7482): Terminated: ok {rc=0} 23:18:48.185978 --- ParallelTerminationStrategy: PID 7483 died... 23:18:48.240740 run iperf3-srv_10.42.42.10(pid=7483): Terminated {rc=256} 23:18:48.250640 --- ParallelTerminationStrategy: PID 7486 died... 23:18:48.305417 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7486): Terminated: ok {rc=0} 23:18:48.315376 --- ParallelTerminationStrategy: PID 7489 died... 23:18:48.370409 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7489): Terminated: ok {rc=0} 23:18:48.380215 --- ParallelTerminationStrategy: PID 7492 died... 23:18:48.435933 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7492): Terminated: ok {rc=0} 23:18:48.522443 bus /gobi_0: Setting Powered False 23:18:49.629218 bus /gobi_0: Setting Powered False 23:18:50.740979 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7490): Process ended prematurely: osmo-stp_10.42.42.5(pid=7490) [trial-2383↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7490)]